ADMISSION NEWS

National Institute of Electronics and Information Technology, NIEIT, Aurangabad
Ministry of Electronics and Information Technology, Govt. of India
Dr. B.A.M. University Campus
Aurangabad 431004, Maharashtra
Phone-No: 0240 2982021 2982022
Email: info@nielit.gov.in Website: www.nielit.gov.in

About College:

The history of Centre dates back to 1974 when the Department of Electronics (DoE) now Ministry of Electronics and Information Technology (MeitY), Govt. of India and the University Grants Commission (UGC) set up the first CEDT within the premises of Indian Institute of Science (IISc.), Bangalore with assistance from Swiss Development Corporation. A decade after the successful running of CEDT, Bangalore, DoE (now MeitY) set up similar centres at Aurangabad, Imphal andSrinagar in 1987, Calicut, Mohali and Gorakhpur in 1989, with an objective to develop human resources at different levels and in different specialized areas of Electronics Design. Aim was to bridge the gap between the academic institutions and industries. The CEDT centres based at Aurangabad, Calicut, Gorakhpur, Imphal and Srinagar were merged with DOEACC (a scientific society of MeitY) in 2001. In order for its metamorphism into an Institute of National Importance the Society was renamed as ‘National Institute of Electronics and Information Technology (NIELIT) on October 10, 2011.

Course Name:

M.Tech in Electronics Design Technology (Full time)

Eligibility:

1.    Candidate’s score in the GATE examination.

2.    Minimum of 55 percent marks (50 percent for SC/ST candidates) in their B.E./B.Tech Degree or equivalent in Electronics/Electrical/Telecommunication/instrumentation engineering etc. from a recognized University.

Course Name:

M.Tech in Electronics Design Technology (Part time)

Eligibility:

1.    Candidate’s score in the GATE examination.

2.    Minimum of 55 percent marks (50 percent for SC/ST candidates) in their B.E./B.Tech Degree or equivalent in Electronics/Electrical/Telecommunication/instrumentation engineering etc. from a recognized University.

3.    Serving in  Academic institution/industry/R&D organization engaged in electronic product or system development for at least two years after completion of B.E./B.Tech degree.

4.    The Candidate should be sponsored by the employer.

5.    His/Her working place should be within 60 km distance from the institute.

Course Name:

B.Tech in Electronics System Engineering (Lateral Entry)

Eligibility:

Three Year Diploma Passed candidates of Electronics & allied streams with minimum 45% marks (40 percent for SC/ST candidates) are eligible for Lateral Entry (Direct Second Year) in B.Tech.

Course Name:

Diploma in Electronics Production and Maintenance (DEPM)

Eligibility:

Xth standard/Secondary School Certificate (SSC) Examination passed from a recognized Board with a minimum average score of 35% in Mathematics and Science subjects.

How to Apply:

Visit website for further details and Application forms, Registration fee Rs. 500/- (Non Refundable)

To know more information about how to apply please contact here:

M.Tech in EDT

Phone-No: 09834081669, 09495694547

Email: mtech-abad@nielit.gov.in

B.Tech in ESE

Phone-No: 09623154852, 09623935242

Email: btech-abad@nielit.gov.in

DEPM

Phone-No: 09403532099, 09158762766

Email: mtech-abad@nielit.gov.in

Closing Date:

Document Verification and fee deposit on: 29^th July, 2019

Courses Start from: 1^st August, 2019

Comments:

To know more Information about this courses please visit: www.nielit.gov.in/aurangabad

Central Tool Room and Training Centre, CTRTC, Bhubaneswar
36, Chandaka Industrial Area
Bhubaneswar, Orissa
Phone-No: 0674-2743349 3011733
Fax: 0674-2743061
Email: cttc@satyam.net.in Website: www.cttc.gov.in

About College:

In the present scenario of industrialization; particularly in the engineering field, requirements of specialized tools, dies, jigs, fixtures, moulds, gauges and other precision components are indispensable. Simultaneously demand for quality Tool makers, Tool & Product Designers, Skilled manufacturers, PLC & Industrial Automation engineers and Maintenance Engineers is also growing rapidly. Central Tool Room & Training Centre (CTTC), Bhubaneswar is one of such training, production, design and consultancy centre established in technical cooperation programme between Govt. of India & Govt. of Denmark to meet the above requirements. The excellent infrastructural facilities like land, building etc. have been contributed by Govt. of Orissa. Training activities started in 1991 and Tool production in 1995.

Course Name:

Advanced Diploma in Machine Maintenance and Automation (ADMMA) [Approved by NSQF Level 6]

Duration: 6 Months

Eligibility:

Diploma or Degree in Electrical /Instrumentation Engineering.

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 16^th May, 2019

Course Name:

Master Certificate course in Automation and Process Control (MCCAPC) [Approved by NSQF Level 7]

Eligibility:

Degree in Electrical/Electronics/Instrumentation Engg.

Selection Procedure: First Come First Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 21^st May, 2019

Course Name:

Advanced Diploma in “CNC Programming Techniques and Practices” (ADCNC) [Approved by NSQF Level 6]

Duration: 6 Months

Eligibility:

Diploma in Mechanical/Production Engineering/Automobile/Mould Making/Tool and Die Making or equivalent.

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 17^th May, 2019

Course Name:

Advanced Diploma in Structural Design and Analysis (ADSDA) [Approved by NSQF Level 6]

Eligibility:

Diploma/Degree in Civil Engineering.

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 15^th May, 2019

Course Name:

Advanced Embedded Technology (AET) [Approved by NSQF Level 6]

Eligibility:

Diploma/Degree in Electrical/ Electronics/Computer/Bio-Medical/IT/instrumentation. BSc/MSc in (IT/Electronics/Physics).

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 17^th May, 2019

Comments:

To know more Information about this courses please visit: www.cttc.gov.in