Central Institute of Tool Design, CITD, Hyderabad
A-1 to A-8, A.P.I.E., Balanagar
Hyderabad
Andhra Pradesh
Phone-No: 23772747 2748 2749 6178
Fax: 91-40-23772658
Email: citdcadcam@citdindia.org
Website: www.citdindia.org
Establish: 1968
About College:
Central Institute of Tool Design(CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling. The main objectives of the institute are:
· Training of the technical personnel in Designing & Manufacture of Tools, Dies & Moulds.
· Design & Manufacture of dies, jigs, fixtures and guages, etc.
· Provision of advisory services to Small Scale Units including assistance in design and developing tools for various processes.
· Recommending measures to standardise components for dies, jigs and other tools.
Course Name:
Post Graduation in Tool, Die & Mould Design (PGTD)
in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduation in Tool, Die & Mould Design (PGTD)
Rs. 25,000/-
Eligibility:
Eligibility and Selection Procedure for Post Graduation in Tool, Die & Mould Design (PGTD) in Central Institute of Tool Design, CITD, Hyderabad
Qualification: BE, BTech (Mech, Prodn) or equivalent.
Age limit: 45 years
How To Apply:
Application Procedure for Post Graduation in Tool, Die & Mould Design (PGTD) in Central Institute of Tool Design, CITD, Hyderabad
Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.
Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.
Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.
Closing Date:
Last date for Submission form: 13th August 2016
Course Name:
Post Diploma in Tool Design PDTD
in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Diploma in Tool Design (PDTD)
Self Sponsored - Rs, 20,000/- per semester. Industry sponsored - Rs. 22,000/- per semester
Eligibility:
Eligibility and Selection Procedure for Post Diploma in Tool Design PDTD in Central Institute of Tool Design, CITD, Hyderabad
Qualification: Diploma in Mechanical Engineering or equivalent (Recognized by State Board)
Age: 27 Years
Course Fee: Rs. 13,000/- per semester. Candidates under all categories will be selected through counseling
How to Apply:
Application Procedure for Post Diploma in Tool Design PDTD in Central Institute of Tool Design, CITD, Hyderabad
Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.
Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.
Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.
Closing Date:
Last date for Submission form: 13th August 2016
Course Name:
P G Diploma in Embedded Systems
in Central Institute of Tool Design, CITD, Hyderabad
Course Description:
Post Graduate Diploma in Embedded Systems [Offered by: - Electronics Corporation of India Limited]
Eligibility:
Eligibility and Selection Procedure for P G Diploma in Embedded Systems in Central Institute of Tool Design, CITD, Hyderabad
Degree in Engineering CSE /ECE / EEE and EIE / MSc (Electronics) or equivalent.
Selection Procedure:
Admission will be based on a National level Common Admission Test to evaluate applicant's aptitude and Technical knowledge. The Test will be of 2 hrs duration comprising of objective type questions. The criterion for selection will be based on the applicant's performance in the test.
How to Apply:
Application Procedure for P G Diploma in Embedded Systems in Central Institute of Tool Design, CITD, Hyderabad
Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.
Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.
Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.
Closing Date:
Last date for Submission form: 13th August 2016
Comments:
To know more Information about course please visit: www.citdindia.org