ADMISSION NEWS

Portal for Indian Education and Admission Updates

NAVIGATION - SEARCH

Central Institute of Tool Design, CITD, Hyderabad

Central Institute of Tool Design, CITD, Hyderabad
MSME Tool Room, Hyderabad
Balanagar, Hyderabad, 500037, Telangana
Phone-No: 91-40-23772748 2749 6178
Fax: 91-40-23772658
Email: adminltrg@citdindia.org Website: www.citdindia.org

About College:

Central Institute of Tool Design (CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling.

Course Name:

Post Graduate Diploma in VLSI and Embedded Systems [Approved under: NSQF (Level-8)]

Duration: 1½ years

Course Fee: Rs. 35,000/- Per Semester

Eligibility:

B. E. /B. Tech (ECE/EEE/EIE) or its equivalent.

Course Name:

Post Graduate Diploma in Mechatronics [Approved under: NSQF (Level-8)]

Duration: 1 ½ years

Course Fee: Rs. 35,000/- Per Semester

Eligibility:

B.E./B.Tech (Mech/ECE/EEE/EIE/Prod/Aero/Auto) or its equivalent

How to Apply:

Registration fee: Rs. 1800/-

Security deposit: Rs. 5000/- (Refundable on successful completion of the course)

Note: Fee waiver will be provided for SC and ST candidates as per Govt of India norms.

Cost of Application: Rs. 800/- for general and Rs. 400/- for SC/ST category candidates. However SC/ST category candidates need to enclose proof of their category.

Mode of Selection: Candidates under all categories will be selected based on the rank obtained in the Entrance examination.

(A) Application form can be downloaded from our website and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, on or before 14.12.2019 along with prescribed application cost by way of online receipt or Demand draft drawn in favor of Principal Director, CITD, Hyderabad. (B) Reservation of seats for SC/ST quota exists as per Govt. of india norms.

For further details, please contact training Department

Tel phone no. 040-23772749 Email: citdcadcam@citdindia.org

Closing Date:

Coming Soon…

Comments:

To know more Information about this courses please visit: www.citdindia.org

Central Institute of Tool Design, CITD, Hyderabad

Central Institute of Tool Design, CITD, Hyderabad
MSME Tool Room, Hyderabad
Balanagar, Hyderabad, 500037, Telangana
Phone-No: 91-40-23772748 2749 6178
Fax: 91-40-23772658
Email: adminltrg@citdindia.org Website: www.citdindia.org

About College:

Central Institute of Tool Design (CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling.

Course Name:

Post Graduate Diploma in Tool Design and CAD/ CAM (PGDTDCC)

Duration: 1½ years

Course Fee: Rs. 35,000/- Per Semester

Eligibility:

B. E. /B. Tech in Mechanical Engineering/Production Engineering or Equivalent

Age Limit: 45 years

Course Name:

Post Diploma in Tool Design (PDTD)

Duration: 1 years

Course Fee: Rs. 25,000/- Per Semester

Eligibility:

Diploma in Mechanical Engineering/Tool,Die and Mould Making or Equivalent

Age Limit: 27 Years

How to Apply:

Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad)

Or

By Online at www.citdindia.org by selecting PAY ONLINE SBI Payment Gateway Click the Check Box Proceed Select State of Corporate/Institution All India Select Type of Corporate or Institution Select Educational Institutions Select Educational Institutions Name Central Institute of Tool Design Select Payment Category Select Application Fee Select Training Center Location Select Hyderabad Select Long Term Course Select PGTD or PDTD (as desired by you) Fill relevant details & click submit.

·         For Post Graduate Diploma Course Rs.800/- for general and Rs 400/- for SC/ST category.

·         For Post Diploma Course Rs.700/- for general and Rs.350/ for SC/ST category candidates For PWD candidates fully exempted.

However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

Mode of Application

Application Form & Prospectus can be downloaded from our website under the link “PGDTD & CC and PDTD Admission Notification-2019” and the filled in application form can be sent to The Director (Trg.), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost.

Closing Date:

Availability of applications: 8th July, 2019 (Monday)

Last date for receipt of filled-in application: 14th August, 2019 (Wednesday)

Date of Entrance Exam (Tentative): 18th August, 2019 (Sunday)

Comments:

To know more Information about this courses please visit: www.citdindia.org

Central Institute of Tool Design, CITD, Hyderabad

Central Institute of Tool Design, CITD, Hyderabad
Msme Tool Room, Hyderabad
Balanagar
Hyderabad, Andhra Pradesh
Phone-No: 91-40-2377 1959 23772747 2748 2749 6178
Fax: 91-40-23772658
Email: citdcadcam@citdindia.org Website: www.citdindia.org
Establish: 1968

About College:

Central Institute of Tool Design(CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling. The main objectives of the institute are:

Course Name:

M.E. Mechanical CAD/CAM (MECC)

M.E. Tool Design (METD)

Duration: 2 Years

Eligibility:

B.E. / B. Tech. in Mechanical/ Production / Mechatronics or equivalent. Minimum of 55% marks in the qualifying examination

Age Limit: 45 Years

Course Name:

M.E. Design for Manufacture (MEDFM)

Duration: 2 Years

Eligibility:

B.E. / B. Tech. Mechanical/Production/ Mechatronics/ Automobile / Aeronautical or equivalent. Minimum of 55% of marks in the qualifying examination

Age Limit: 45 Years

How to Apply:

Mode of Application:

Application form can be downloaded from our website under the link “M.E. Admission Notification-2019” and the filled in application form can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500 037, along with prescribed application cost 800/- for General and 400/- for SC/ST category by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online at www.citdindia.org (detailed steps of online payment can be found from prospectus). However SC/ST/PWD category candidates need to enclose proof of their category duly self attested.

PWD candidates are fully exempted from paying the application cost.

Further details can be obtained from prospectus available on our website under the link “M.E. Admission Notification-2019”

Closing Date:

Availability of applications: 6th May, 2019 (Monday)

Last date for receipt of filled-in application: 13th June, 2019 (Thursday)

Date of Entrance exam (Tentative): 16th June, 2019 (Sunday) Centre of Entrance Examination: Hyderabad

Comments:

To know more Information about this courses please visit: www.citdindia.org

Central Institute of Tool Design, CITD, Hyderabad

Central Institute of Tool Design, CITD, Hyderabad
(A Government of India Society Ministry of MSME)
A-1 to A-8, A.P.I.E., Balanagar
Hyderabad, Andhra Pradesh
Phone-No: 91-40-23772747 2748 2749 6178
Fax: 91-40-23772658
Email: citdcadcam@citdindia.org Website: www.citdindia.org
Establish:1968

About College:

Central Institute of Tool Design (CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculties were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling.

Course Name:

Diploma in Tool, Die and Mould Making (DTDM)

Duration: 4 Years

Eligibility:

10th Pass with 50% for general & 45% for SC / ST.

Age Limit:

Minimum 15 years, Maximum 19 years as on 1st April in the year of admission, Relaxation up to 5 years for SC/ST Candidates.

Course Name:

Diploma in Electronics and Communication Engineering (DECE)

Diploma in Automation and Robotics Engineering (DARE)

Diploma in Production Engineering (DPE)

Duration: 3 Years

Eligibility:

10th Pass

Age Limit:

Minimum 15 years, Maximum 19 years as on 1st April in the year of admission, Relaxation up to 5 years for SC/ST Candidates.

How to Apply:

Mode of Application

Application form can be downloaded from our website www.citdindia.org under the link “Diploma Admission Notification-2019” and the filled in application forms can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-500037, along with prescribed application cost Rs. 700/- for General and Rs. 350/- for SC/ST category and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer; by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad or By Online through the website (detailed steps of online payment can be found from prospectus).

Centre of Entrance Examination: Hyderabad

Further details can be obtained from prospectus available on our website under the link “Diploma Admission Notification-2019”

Closing Date:

Last date for receipt of filled-in application: 27th April, 2019 (Saturday)

Last date for receipt of filled-in application with late fee of Rs.500/-: 2nd May, 2018 (Thursday)

Date of Entrance exam (Tentative): 5th May, 2019 (Sunday)

Comments:

To know more Information about this courses please visit: www.citdindia.org

Central Institute of Tool Design, CITD, Hyderabad

Central Institute of Tool Design, CITD, Hyderabad
(A Government of India Society Ministry of MSME)
A-1 to A-8, A.P.I.E., Balanagar
Hyderabad, Andhra Pradesh
Phone-No: 23772747 2748 2749 6178
Fax: 91-40-23772658
Email: citdcadcam@citdindia.org Website: www.citdindia.org
Establish:1968

About College:

Central Institute of Tool Design (CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculties were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling. The main objectives of the institute are:

·         Training of the technical personnel in Designing & Manufacture of Tools, Dies & Moulds.

·         Design & Manufacture of dies, jigs, fixtures and guages, etc.

·         Provision of advisory services to Small Scale Units including assistance in design and developing tools for various processes.

·         Recommending measures to standardise components for dies, jigs and other tools.

Course Name:

Post Graduate Diploma in Tool Design and CAD/ CAM (PGDTDCADCAM) Duration: 1½ years

Eligibility:

Bachelor of Engineering/Bachelor of Technology in Mechanical Engineering/Prod. Engineering or Equivalent)

Age Limit: 45 years

Course Name:

Post Graduate Diploma in VLSI & Embedded Systems (PGDVES) Duration:1½ years

Eligibility:

Bachelor of Engineering/Bachelor of Technology in Electronics and Communication/Electrical and Electronics/Instrumentation or Equivalent

Age Limit: 45 years

Course Name:

Post Graduate Diploma in Mechatronics (PGIM) Duration: 1½ years

Eligibility:

Bachelor of Engineering/Bachelor of Technology in Mechanical Engineering/Prod. Engineering/Electronics Engineering/ Electrical Engineering/Instrumentation Engineering or Equivalent.

Age Limit: 45 years

Course Name:

Post Diploma in Tool Design & CAD/CAM (PDTDCADCAM) Duration: 1 year

Eligibility:

Diploma in Mechanical Engineering,Tool,Die and Mould Making or Equivalent)

Age Limit: 27 years

How to Apply:

Application form can be downloaded from our website www.citdindia.org (From 27-06-2018) and the filled in application forms can be sent to

The Director (Training),

Central Institute of Tool Design,

Balanagar, Hyderabad-500 037

Along with prescribed application cost. The envelope should be super scribed with “Application for PG or PD Admission”. The Mode of Selection, application form, Prospectus, reservations rules, hostel accommodation and other details are available at our website. Candidates are advised to refer the prospectus for details.

Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad) Or By Online For Post Graduate Diploma Courses Rs.800/- for general and Rs 400/- for SC/ST category and for Post Diploma Courses Rs.700/- for general and Rs.350/ for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Closing Date:

Last date for submission of filled–in applications (up to 4.00 PM at CITD): 26th July, 2018 (Thursday)

Last date for submission of filled–in applications with late fee of Rs. 500/- (up to 4.00 PM at CITD): 31st July, 2018 (Tuesday)

Date of Examination: 5th August, 2018 (Sunday) at Hyderabad.

 

Course Name:

Master of Technology (MTech) [Mechatronics]

Eligibility:

B.E. / B. Tech. in Mechanical/ ECE/EEE/EIE/Mechatronics/Automobile/Aeron autical Engineering or equivalent. Minimum of 55% marks in the qualifying examination from the Institutions approved by AICTE.

Age Limit: 45 years (Except Sponsored Candidates)

Course Fee: Rs. 41,000/- per semester, Industrial Sponsored – Rs.51,000 per semester

How to Apply:

Application form can be downloaded from our website www.citdindia.org (From 25th June 2018) and the filled in application forms can be sent to

The Director (Training),

Central Institute of Tool Design,

Balanagar, Hyderabad-500 037

Along with prescribed application cost. The envelope should be super scribed with “Application for “M.Tech Mechatronics”. Candidates are advised to refer the prospectus for details available at our website.

Cost of Application: (By way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad) Or by Online Rs.800/- for general and Rs 400/- for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Centre of Examination: JNTUH, College of Engineering, Kukatpally, Hyderabad

Closing Date:

Last date for submission of Application by 5.00 PM: 21st July, 2018 (Saturday)

Last date for submission of Applications with late fee of Rs. 500/-: 28th July 2018 (Saturday)

Date of Examination: 5th August, 2018 (Sunday)

Comments:

 

To know more Information about this Course please visit: www.citdindia.org

Central Institute of Tool Design, CITD, Hyderabad

Central Institute of Tool Design, CITD, Hyderabad

A-1 to A-8, A.P.I.E., Balanagar 

Hyderabad 
Andhra Pradesh 
Phone-No: 23772747 2748 2749 6178 
Fax: 91-40-23772658 
Email: 
citdcadcam@citdindia.org
Website: www.citdindia.org
Establish: 1968

About College:

Central Institute of Tool Design(CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling. The main objectives of the institute are:

·         Training of the technical personnel in Designing & Manufacture of Tools, Dies & Moulds.

·         Design & Manufacture of dies, jigs, fixtures and guages, etc.

·         Provision of advisory services to Small Scale Units including assistance in design and developing tools for various processes.

·         Recommending measures to standardise components for dies, jigs and other tools.

Course Name:

Post Graduation in Tool, Die & Mould Design (PGTD)

in Central Institute of Tool Design, CITD, Hyderabad

Course Description:

Post Graduation in Tool, Die & Mould Design (PGTD)

Rs. 25,000/-

Eligibility:

Eligibility and Selection Procedure for Post Graduation in Tool, Die & Mould Design (PGTD) in Central Institute of Tool Design, CITD, Hyderabad

Qualification: BE, BTech (Mech, Prodn) or equivalent.

Age limit: 45 years

How To Apply:

Application Procedure for Post Graduation in Tool, Die & Mould Design (PGTD) in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:

Last date for Submission form: 13th August 2016

Course Name:

Post Diploma in Tool Design PDTD

in Central Institute of Tool Design, CITD, Hyderabad

Course Description:

Post Diploma in Tool Design (PDTD)

Self Sponsored - Rs, 20,000/- per semester. Industry sponsored - Rs. 22,000/- per semester

Eligibility:

Eligibility and Selection Procedure for Post Diploma in Tool Design PDTD in Central Institute of Tool Design, CITD, Hyderabad

Qualification: Diploma in Mechanical Engineering or equivalent (Recognized by State Board)

Age: 27 Years 

Course Fee: Rs. 13,000/- per semester. Candidates under all categories will be selected through counseling

How to Apply:

Application Procedure for Post Diploma in Tool Design PDTD in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:

Last date for Submission form: 13th August 2016

Course Name:

P G Diploma in Embedded Systems

in Central Institute of Tool Design, CITD, Hyderabad

Course Description:

Post Graduate Diploma in Embedded Systems [Offered by: - Electronics Corporation of India Limited]

Eligibility:

Eligibility and Selection Procedure for P G Diploma in Embedded Systems in Central Institute of Tool Design, CITD, Hyderabad

Degree in Engineering CSE /ECE / EEE and EIE / MSc (Electronics) or equivalent.  

Selection Procedure:   

Admission will be based on a National level Common Admission Test to evaluate applicant's aptitude and Technical knowledge. The Test will be of 2 hrs duration comprising of objective type questions. The criterion for selection will be based on the applicant's performance in the test.

How to Apply:

Application Procedure for P G Diploma in Embedded Systems in Central Institute of Tool Design, CITD, Hyderabad

Cost of Application Rs. 400/- for general and Rs. 200/- for SC/ST category candidates and for PWD candidates fully exempted. However, SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

Application form and prospectus can be obtained from Training, Department, MSME Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037. on any working day between 9:30 AM and 5:00 PM. (Weekly holiday on Sunday) by paying application cost prescribed in the form of crossed demand draft drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.

Application form can also be downloaded from www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favour of Principal Director, CITD, Hyderabad Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

Closing Date:

Last date for Submission form: 13th August 2016

Comments:

To know more Information about course please visit: www.citdindia.org