ADMISSION NEWS

Portal for Indian Education and Admission Updates

NAVIGATION - SEARCH

Utkal University, UU, Bhubaneswar

Utkal University, UU, Bhubaneswar
(Accredited A+ by NAAC)
Vani Vihar
Bhubaneswar, Odisha
Phone-No: 0674-2567940
Fax: 0674-2585035
Email: admin@utkaluniversity.nic.in Website: www.utkaluniversity.nic.in
Establish: 1943

About College:

Until 1936, when Odisha was made into a separate province, all its colleges were under the jurisdiction of either Patna University or Andhra University. Subsequently, the government of Odisha, headed by Shri Biswanath Dash, the then Prime Minister; appointed a committee on 2nd March 1938 with Pandit Nilakantha Das as its Chairman to examine the possibility of establishing a separate university in Odisha. Then, during the premiership of Maharaja Krushna Chandra Gajapati, who played a pioneering role in the establishment of the University, the recommendations of this committee were made available. Pandit Godavarish Mishra, the then Minister of Education, introduced the Utkal University Bill, which was passed by the Odisha Legislative Assembly on 30th June 1943. On receiving the Governor's assent on 2nd August 1943, the Utkal University Act, 1943 came into force, clearing the way for the foundation of Utkal University on 27th November 1943. The University started functioning from this date in room no. 15 of Ravenshaw College, Cuttack. The Utkal University Act, 1943 did not specify clearly the territorial jurisdiction of the University. However, its jurisdiction was extended to include the princely states of Odisha by an agreement between the rulers of these princely states and the Government of Odisha. According to the agreement, adequate representation of the princely states in the administrative and academic bodies of the University was ensured. The Utkal University Act, 1943 was amended in 1947 defining the territorial jurisdiction of the University, which was subsequently extended to the whole state of Odisha in 1950. Dr. Pranakrushna Parija, the then Principal of Ravenshaw College, Cuttack was the first Vice-Chancellor of the University, and Mr. V. V. John, the then Assistant Professor of English, Ravenshaw College was its first Registrar.

Course Name:

MBA in Rural Management at New Campus, Chandikhole

Duration: 2 years

Eligibility:

Bachelor's degree under any stream with at least 50% marks in aggregate (except AMIE) and for SC/ST/PH candidates 45% marks in aggregate.

How to Apply:

To know more information about how to apply please contact here:

Contact persons:

1.    Prof. J. Dandapat, OSD, New Campus, Chandikhole, M-9437466087

2.    Prof. B.B. Mishra, Department of MBA, M-9437134777

3.    Dr. R. Garada, Department of Sociology, M-9437517126

NB:

1.    Hard copy of the application form along with documents to be collected from the candidates on the day of entrance (i.e. 23.09.2018).

2.    There is no provision for Hostel accommodation.

3.    No 2nd P.G. admission is admissible.

4.    Course fee Rs.25,000/- (Rupees twenty five thousand) only per annum + Admission fees per annum (as applicable).

Closing Date:

Availability and online submission of Application Form: 7th September, 2018 to 20th September, 2018 (Mid night)

Date of Entrance Test: 23rd September, 2018 (Sunday): 11.30am to 12.30pm. Entrance Venue: Department of Business Administration, Utkal University.

Date of publication of Entrance Test Result: 25th September, 2018

Date of Admission: 28th & 29th September, 2018

Comments:

To know more Information about this courses please visit: www.utkaluniversity.nic.in

Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Central Tool Room and Training Centre, CTRTC, Bhubaneswar
36, Chandaka Industrial Area
Bhubaneswar, Orissa
Phone-No: 0674-2743349 3011733
Fax: 0674-2743061
Email: cttc@satyam.net.in Website: www.cttc.gov.in

About College:

In the present scenario of industrialization; particularly in the engineering field, requirements of specialized tools, dies, jigs, fixtures, moulds, gauges and other precision components are indispensable. Simultaneously demand for quality Tool makers, Tool & Product Designers, Skilled manufacturers, PLC & Industrial Automation engineers and Maintenance Engineers is also growing rapidly. Central Tool Room & Training Centre (CTTC), Bhubaneswar is one of such training, production, design and consultancy centre established in technical cooperation programme between Govt. of India & Govt. of Denmark to meet the above requirements. The excellent infrastructural facilities like land, building etc. have been contributed by Govt. of Orissa. Training activities started in 1991 and Tool production in 1995.

Course Name:

Advanced Diploma in Machine Maintenance and Automation (ADMMA) [Approved by NSQF Level 6] Duration: 6 Months

Eligibility:

Diploma or Degree in Electrical /Instrumentation Engineering.

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 12th September, 2018

 

Course Name:

Advanced Diploma in “CNC Programming Techniques and Practices” (ADCNC) [Approved by NSQF Level 6] Duration: 6 Months

Eligibility:

Diploma in Mechanical/Production Engineering/Automobile/Mould Making/Tool and Die Making or equivalent.

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 11th September, 2018

 

Course Name:

Certificate Course in Electrical Equipment Repair And Maintenance (CCERM) [Approved by NSQF Level 6] Duration: 6 Months

Eligibility:

Diploma/Degree in Electrical Engineering.

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 6th September, 2018

 

Course Name:

Advance Certificate Course in Welding Technology (ACCWT) [Approved by NSQF Level-5] Duration: 1 Year

ITI in Welder

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 5th September, 2018

 

Course Name:

Certificate Course in Machining (CCM) [Approved by NSQF Level 5] Duration: 6 Months

ITI pass in the Trade of Fitter

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 7th September, 2018

Comments:

 

To know more Information about this courses please visit: www.cttc.gov.in

Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Central Tool Room and Training Centre, CTRTC, Bhubaneswar
36, Chandaka Industrial Area
Bhubaneswar, Orissa
Phone-No: 0674-2743349 3011733
Fax: 0674-2743061
Email: cttc@satyam.net.in Website: www.cttc.gov.in

About College:

In the present scenario of industrialization; particularly in the engineering field, requirements of specialized tools, dies, jigs, fixtures, moulds, gauges and other precision components are indispensable. Simultaneously demand for quality Tool makers, Tool & Product Designers, Skilled manufacturers, PLC & Industrial Automation engineers and Maintenance Engineers is also growing rapidly. Central Tool Room & Training Centre (CTTC), Bhubaneswar is one of such training, production, design and consultancy centre established in technical cooperation programme between Govt. of India & Govt. of Denmark to meet the above requirements. The excellent infrastructural facilities like land, building etc. have been contributed by Govt. of Orissa. Training activities started in 1991 and Tool production in 1995.

Course Name:

Post Diploma in Tool and Die Manufacturing (PDTDM) [Approved by NSQF Level 6]

Eligibility:

Diploma/Degree in Mechanical/Production/Automobile or its equivalent.

Selection Procedure: First Come First Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 28th August, 2018

 

Course Name:

Master Certificate course in Automation and Process Control (MCCAPC) [Approved by NSQF Level 7]

Eligibility:

Degree in Electrical/Electronics/Instrumentation Engg.

Selection Procedure: First Come First Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 30th August, 2018

 

Course Name:

Post Diploma in CAD/CAM (PDCC) [Approved by NSQF Level 6]

Eligibility:

Diploma/Degree in Mechanical/Production/Tool and Die Making/Automobiles or its equivalent.

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 29th August, 2018

 

Course Name:

Advanced Certificate Course in CNC Machining (ACCCM) [Approved by NSQF Level 5]

Eligibility:

ITI pass in the Trade of Mechanical/Turner/Fitter/Tool and Die Maker/Draftsman/Mechanical or equivalent.

Selection Procedure: First Come First Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 29th August, 2018

 

Course Name:

Advanced Diploma in Structural Design and Analysis (ADSDA) [Approved by NSQF Level 6]

Eligibility:

Diploma/Degree in Civil Engineering.

Selection Procedure: First Come first Serve Basis.

How to Apply:

Application are to be submitted in plain paper along with Bio data, copies of marksheets & certificates, two passport size color photographs & fee payment Online through State Bank of India Collect link Available in our website or a DD of Rs. 1000/- drawn in favour of “Central Tool Room & Training Centre” payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1500/- per month for outstation Candidates.

Reservation as per Govt. of India Rules. For SC/ST Candidates no fee will be charged subject to production of two photo copies of self attested caste Certificate and aadhaar card. Caste certificate and Aadhaar card in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority.

Closing Date:

Last date of receipt of Application: 4th September, 2018

Comments:

 

To know more Information about this courses please visit: www.cttc.gov.in

Xavier University, XU, Bhubaneswar

Xavier University, XU, Bhubaneswar
Campus Xavier Square
Bhubaneswar, Odisha
Phone-No: 91 674 6647 806900
Email: admission@xub.edu.in Website: www.xub.edu.in

About College:

Xavier University Bhubaneswar (XUB) sees itself as a quality institute delivering quality management education to quality students from the world over. The Xavier University came into being with the Government of Odisha passing the Xavier University Act in June 2013. It inherits the legacy of XIMB (Xavier Institute of Management Bhubaneswar), a premier world class B-School in the country.

Course Name:

Integrated B.A. L.L.B. (Honours) Courses offered by Xavier Law School

Integrated B.B.A. L.L.B. (Honours) Courses offered by Xavier Law School

Eligibility:

• Admission will be undertaken based on the scores of the candidates of CLAT-2018 and Entrance Examination of Xavier Law School, Xavier University.

• Candidates who are appearing or have appeared in the 10+2 examination and are awaiting results are also eligible to appear in the test. However, such candidates are required to have passed the qualifying examination at the time of their admission and must be able to submit proofs in support of their claims. No provisional admission shall be provided to those candidates who are not submitting the result of the qualifying examination (i.e. 10+2) at the time of admission.

• There will be no upper age limit for admissions to these programmes as prescribed by CLAT-2018.

• As regards minimum percentage of marks in the qualifying examination (i.e., 10+2), the candidates must have secured 45% more from a recognized Board/Council of the respective State or at the National level.

• Candidates who are appearing in the qualifying examination in March/April, 2018 are also eligible to appear in CLAT-2018 online examination. However, they shall be required to produce an evidence of their passing the qualifying examination at the time of admission, failing which they shall lose their right to be considered for admission.

• The result of the qualifying examination (i.e., 10+2) shall be submitted by the candidate at the time of admission failing which the candidate shall be ineligible for admission to the Course.

• In case of equal marks, the break of tie shall be by the following procedure and order as under:

Higher marks in the component /section on legal aptitude in the CLAT-2018 exam;

Higher age & Computerised draw of lots

How to Apply:

For all admission related queries, please contact via e-mail: admission.law@xls.edu.in / Mobile No: 9348689102 [10am to 5pm on working days]

To know more information about how to apply please contact here:

Xavier LAW School
Xavier University Bhubaneswar,

Xavier City Campus, Plot No:12(A), Nijigada, Kurki, Harirajpur
Pin: 752050, Dist.-Puri, Odisha
Phone: 0674 2377700-66 08511119113
Email: contact@xls.edu.in

Closing Date:

Last Date for Online Application: 10th August, 2018

 

Comments:
To know more Information about this Course please visit:
 www.xls.edu.in

Ranjita Institute of Hotel Management and Catering Technology, RIHMCT, Bhubaneswar

Ranjita Institute of Hotel Management and Catering Technology, RIHMCT, Bhubaneswar
Affiliated to NCHMCT, Noida, Ministry of Tourism, Govt. of India

Bidyanagar, Mahura, Janla, 
Bhubaneswar - 752054, Odisha
Ph.: 0674 6606555 +91 8337900335
Fax: +91 674 2113593 2113525 
Email: info@rihmct.edu.in Web: www.rihmct.edu.in

About College:

Ranjita Institute of Hotel Management & Catering Technology is the most sophisticated service oriented management Institute in Eastern India. Affiliated to National Council for Hotel Management & Catering Technology (NCHM & CT), New Delhi. RIHC education program offers a unique blend of culinary tradition and up-to-date industry standards. RIHC students review all aspects of the field from accommodation management to hospitality law, marketing and sales. Distinguished teams of industry professionals with years of experience in the industry and academic with outstanding credentials ensure that the students get exposure to practical competencies and theoretical frameworks.

Course Name:

BSc in Hospitality & Hotel Administration

Eligibility:

Age Limit: For candidates, upper age limit is 22 years

A pass in 10 +2 system of senior secondary examination in any stream or its equivalent with English as one of the subjects.

Selection Procedure: Admission to the program will be based on merit in the joint entrance examination (NCHMCT - JEE) and choice of institutes exercised by the candidate.

Course Name:

PG Diploma in Accommodation Operation & Management (PGDAOM)

Eligibility:

·         Direct Admission based on Merit.

·         Any Stream Graduate.

Pass in any degree or its equivalent.

Course Name:

Diploma in Food Production (DFP)

Diploma in Food & Beverage Service (DFBS)

Diploma in Front-Office Operation (DFOO)

Diploma in House-Keeping (DHK)

Eligibility:

Direct admission based on merit

Any stream of 10+2

How to Apply:

Forms available on website - online/offline

To know more information about how to apply please contact here:

Ranjita Institute of Hotel Management & Catering Technology, RIHMCT, Bhubaneswar
Bidyanagar, Mahura, Janla, 
Bhubaneswar - 752054, Odisha, India 
For more information, please contact: 9040 021 100 / 101 / 102 / 103

Admission Cell: 9040021100 / 9040021101 / 9040021102 / 9040021103

E-mail Id: admission@rihmct.edu.in

Closing Date:

Last Date for B.Sc (H&HA): 9th July 2018

Comments:

To know more Information about this courses please visit: www.rihmct.edu.in

KIIT School of Rural Management, KSRM, Bhubaneswar

KIIT School of Rural Management, KSRM, Bhubaneswar

KIIT University 
Krishna Campus-7, PO-KIIT 

Bhubaneswar 
Odisha 
Phone-No: 0674 – 2725742 2375700 2375780 
Fax: 0674 - 2725378 Mob- 
Email: 
admission@ksrm.ac.in
Website: 
www.ksrm.ac.in
Establish:

About College:

The KIIT School of Rural Management (KSRM), Bhubaneswar came into existence on 20th November 2006 as a constituent of KIIT University,Bhubaneswar. Its existing 2-year MBA (Rural Management) is designed to balance academics with experiential learning. The KSRM model creates a vibrant learning environment for students in collaboration with our 250 partner organizations with diverse portfolio of activities related to development of rural economy. The success of the programme is reflected in excellent record of 100% campus placement for all its Five batches comprising of 312 students passed out so far.

Having achieved highest standards for its flagship Programme of MBA (Rural Management), KSRM is now moving closer to realizing its vision to become a leading global academic institution in the field of Rural Management. Towards this end KSRM is working on its new initiative “360 Degrees of Rural Management Education” to achieve complete depth and width in providing full range of short and long-term academic programmes by 2016 to meet the growing managerial needs of all types of organizations connected with rural economy.

Course Name:

Master of Business Administration MBA Rural Management

in KIIT School of Rural Management, KSRM, Bhubaneswar

Course Description:

MBA (Rural Management) Admission 2018

Eligibility:

Eligibility and Selection Procedure for Master of Business Administration MBA Rural Management in KIIT School of Rural Management, KSRM, Bhubaneswar

Graduate in any discipline recognized by the AIU with a minimum of 15 years (10+2+3) of education and having minimum 50% aggregate marks (or equivalent CGPA) with valid KIITEE Management, CAT, XAT, CMAT and MAT score 

The percentage of aggregate marks is to be calculated as per the practice followed by the concerned University/Institution from where the candidate has obtained the degree 

The students who are appearing for final year graduation exams are also eligible to apply and will be given provisional admission subject to submission of their final results before 30th September 2018 

Selection Procedure 

Basis of Selection - Candidates shall be shortlisted on the basis KIITEE Management, CAT, XAT, CMAT and MAT exam scores and other exam scores for appearing in GD and /or PI at Bhubaneswar, Kolkata, New Delhi, Bangalore and Mumbai 

The final selection shall be based on CAT, KIITEE Management, XAT and CMAT exam scores, career marks and performance in GD & PI. Successful candidates will be intimated of their final selection through admission offer letter containing the terms and conditions of: 

The selected candidates shall confirm and accept the admission with terms and conditions for taking admission to the program and submit the Acceptance Letter in its prescribed format 

Program Fee 

The total fee for the MBA (Rural Management) Program is Rs.647000/- (Rupees Six Lakhs Forty Seven Thousand only) payable in four installments. The fee includes all expenses Hostel, Mess and including provision of Laptop to all students 

No other fee is charged during the full duration of the program 

How To Apply:

Application Procedure for Master of Business Administration MBA Rural Management in KIIT School of Rural Management, KSRM, Bhubaneswar

Option-1: Apply Online at http://ksom.cn1.formsdotstar.com/online-application-kiitee 
Candidates applying through Option 1 would be required to submit copies of their mark sheets and other supporting documents at a later stage, as will be instructed by the institution. Payment (Form Cost: Rs.1250/-) can be done through Credit Cards, Debit Cards, Net Banking etc. 

Option-2: Download application from www.ksrm.ac.in 
Candidates applying through Option 2 need to make a DD of Rs.1250/- drawn in favour of "KIIT School of Rural Management", payable at Bhubaneswar 

The Demand Draft along with the filled in and signed application form needs to be sent to "Admissions Coordinator, KIIT School of Rural Management, Campus-7, KIITUniversity, Bhubaneswar-751024" 

Name and Address of the candidate needs to be mentioned on the reverse of the Demand Draft. Candidates should retain photocopies of the DD and the application form submitted for future reference 

Admit Card 

Information on receipt of applications at KIIT School of Rural Management will be available on the website www.ksrm.ac.in. Candidates can check the status of their Application Form on the website 

Exam Centres 

The above entrance exam will be conducted online in the following 15 centres: Odisha (Bhubaneswar, Rourkela), Andhra Pradesh (Hyderabad), Assam (Guwahati), Bihar (Patna), Chhattisgarh (Raipur), Jharkhand (Ranchi, Jamshedpur), Karnataka (Bangalore), Maharashtra (Mumbai), NRC (New Delhi), Tamil Nadu (Chennai), Uttar Pradesh (Allahabad, Lucknow), West Bengal (Kolkata) 

Closing Date:

Last Date of Receiving Completed Forms: 20th January 2018 

Dates of Entrance Exam: 28th - 30th January 2018 

Publication of Result: 05th February 2018 

Comments:

 

To know more Information about course please visit: www.ksrm.ac.in

Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Central Tool Room and Training Centre, CTRTC, Bhubaneswar

36, Chandaka Industrial Area 

Bhubaneswar 
Orissa 
Phone-No: 0674-2743349 3011733 
Fax: 0674-2743061 
Email: 
cttc@satyam.net.in
Website: 
www.cttc.gov.in
Establish:

About College:

In the present scenario of industrialization; particularly in the engineering field, requirements of specialized tools, dies, jigs, fixtures, moulds, gauges and other precision components are indispensable. Simultaneously demand for quality Tool makers, Tool & Product Designers, Skilled manufacturers, PLC & Industrial Automation engineers and Maintenance Engineers is also growing rapidly. Central Tool Room & Training Centre (CTTC), Bhubaneswar is one of such training, production, design and consultancy centre established in technical cooperation programme between Govt. of India & Govt. of Denmark to meet the above requirements. The excellent infrastructural facilities like land, building etc. have been contributed by Govt. of Orissa. Training activities started in 1991 and Tool production in 1995.

CTTC is unique in imparting industry oriented long & short term training programmes on CAD/CAM, Tool Design & Manufacturing, Tool & Die Making, CNC Programming & Machining, Machine Maintenance, CCNA, Industrial Automation, VLSI, Hardware & Networking Management, ITI (Machinist/Welder) etc. CTTC believes in PRACTICE MAKES PERFECT.

We have varied range of machinery to produce quality product with specialization in the field of Tool Production.
TOOL PRODUCTION

Plastic Moulds, Press Tools, Jigs & Fixtures, Gauges, Extrusion Dies, Die Casting Dies etc. 
Production of highly accurate Tooling & Machining Components.

Course Name:

Advanced Diploma in Structural Design and Analysis CADCAE

in Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Course Description:

Advanced Diploma in Structural Design and Analysis (CAD/CAE) Admission 2018

Eligibility:

Eligibility and Selection Procedure for Advanced Diploma in Structural Design and Analysis CADCAE in Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Duration: 06 Months (Starting from 18.01.2018)

Eligibility: Diploma/Degree in Civil Engineering

Fees: Rs. 34,500/- (to be paid in two equal installments)

Selection Procedure: First come first serve basis.

How To Apply:

Application Procedure for Advanced Diploma in Structural Design and Analysis CADCAE in Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Application are to be submitted in plain paper alongwith Bio-data, copies of marksheets & certificates, two passport size color photographs & fee payment challan (Training & Accounts Section Copy) of Rs. 1000/- (available in the Centre's website) deposited at any State Bank of India having Core Banking Services (CBS) facilities or a DD of Rs. 1000/- drawn in favour of "Central Tool Room & Training Centre" payable at Bhubaneswar for the purpose of registration. This amount will be adjusted against the course fee. Limited dormitory accommodation is available on payment of Rs. 1200/- per month for outstation Candidates.

For SC/ST candidates no fee will be charged subject to production of two photo copies of Caste

Certificate duly attested by Gazetted Officer. Caste Certificate in original from competent authority is to be produced for verification at the time of admission which may be re-verified from the Issuing Authority.

Closing Date:

Last date for Submission form:  11th January 2018

Course Name:

Advance Diploma in Machine Maintenance Automation ADMMA

in Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Course Description:

Advance Diploma in Machine Maintenance & Automation (ADMMA) [COURSE CONTENT: Operation Maintenance of Conventional Lathe, Milling, Grinding, CNC Milling & CNC Lathe, Basic Electrical Control and Electric Drives, Industrial Automation: PLC Programming and SCADA Operation, Basic PLC, PLC Hardware details, Ladder Programming for HVAC Electrical Ladder Schematics, Various Parameters, Variables in PLC Programming, Supervisory Control & Data Acquisition (SCADA) Verification, SCADA with HVAC Electrical equipments.] Admissions 2018

Eligibility:

Eligibility and Selection Procedure for Advance Diploma in Machine Maintenance Automation ADMMA in Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Diploma in Electrical or equivalent

Fees: Rs 34,500/- (to be paid in two equal installments)

Intake: 30

How To Apply:

Application Procedure for Advance Diploma in Machine Maintenance Automation ADMMA in Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Application are to be submitted in plain paper along with Bio-data, copies of mark sheets and certificates, two passport size photographs. A DD of Rs 1000/- drawn in favour of "Central Tool Room & Training Centre" payable at Bhubaneswar is to be paid for the purpose of registration which will be adjusted against the course fee.

22.5% seats are reserved for SC/ST candidates for whom no fee will be charged subject to production of two photo copies of Caste Certificate duly attested by Gazetted Officer. A caution deposit of Rs, 1000/- is to be paid along with application in shape of Demand Draft which will be refunded after successful completion of Training with minimum 85% attendance. Caste Certificate in original from competent authority is to be produced for verification at the time of admission which may be reverified from the Issuing Authority.

Closing Date:

Last date for Submission form: 11th January 2018

Course Name:

Post Diploma in Computer Aided Manufacturing PDCAM

in Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Course Description:

Post Diploma in Computer Aided Manufacturing (PDCAM) Admission 2018

Eligibility:

Eligibility and Selection Procedure for Post Diploma in Computer Aided Manufacturing PDCAM in Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Diploma/Degree in Mechanical/Production/Automobile or its equivalent. Final year students expecting results before start of course can apply.

Selection: First come first serve basis.

Course fees: Rs.54, 800/-(To be paid in four equal installments)

How To Apply:

Application Procedure for Post Diploma in Computer Aided Manufacturing PDCAM in Central Tool Room and Training Centre, CTRTC, Bhubaneswar

Application are to be submitted in plain paper along with Bio-data, copies of mark sheets and certificates, two passport size photographs. A DD of Rs 1000/- drawn in favour of "Central Tool Room & Training Centre" payable at Bhubaneswar is to be paid for the purpose of registration which will be adjusted against the course fee.

22.5% seats are reserved for SC/ST candidates for whom no fee will be charged subject to production of two photo copies of Caste Certificate duly attested by Gazetted Officer. A caution deposit of Rs. 1000/- is to be paid along with application in shape of Demand Draft which will be refunded after successful completion of Training with minimum 85% attendance. Caste Certificate in original from competent authority is to be produced for verification at the time of admission which may be reverified from the Issuing Authority.

Closing Date:

Last date for Submission form: 27th December 2017

Comments:

 

To know more Information about course please visit: www.cttc.gov.in

XAVIER UNIVERSITY, XU, BHUBANESWAR

XAVIER UNIVERSITY, XU, BHUBANESWAR

Campus Xavier Square 

Bhubaneswar 
Odisha 
Phone-No: 91 674 6647 806900 
Fax: 
Email: 
admission@xub.edu.in
Website: www.xub.edu.in
Establish:

About College:

Xavier University Bhubaneswar (XUB) sees itself as a quality institute delivering quality management education to quality students from the world over. The Xavier University came into being with the Government of Odisha passing the Xavier University Act in June 2013. It inherits the legacy of XIMB (Xavier Institute of Management Bhubaneswar), a premier world class B-School in the country.

Course Name:

Master Programme in Mass Communication (MA-MC)

in XAVIER UNIVERSITY, XU, BHUBANESWAR

Course Description:

Master Programme in Mass Communication (MA-MC) offered in Xavier School of Communications (XCOMM) Xavier University Bhubaneswar (XUB) for the academic session 2018-19

Eligibility:

Eligibility and Selection Procedure for Master Programme in Mass Communication (MA-MC) in XAVIER UNIVERSITY, XU, BHUBANESWAR

Candidates should be minimum three-year Bachelor's degree (or equivalent) in any discipline, with at least 55% marks in aggregate, from a recognized University. Final year degree students, who expect to complete their final examinations and other requirements for obtaining the degree by 15th June 2018, can also apply

Selection Process

The eligible candidates will have to appear for admission test and/or personal interview to be conducted by Xavier University Bhubaneswar in May or June 2018. The final selection will be based on the candidate's performance in the admission test and/or Personal Interview, and will take into account the past academic record and relevant work experience.

How To Apply:

Application Procedure for Master Programme in Mass Communication (MA-MC) in XAVIER UNIVERSITY, XU, BHUBANESWAR

Application

Applicants have to fill up the online application

Step 1: Fill up the "Login Details" to create and receive by email a unique XUB ID and Password for applying to XUB. If you have already received your XUB ID and Password, then login as per Step 2

Step 2: Login with your XUB ID and Password. Fill up the Personal Details, Academic Details, Professional Details, upload your photo & signature, and choose the program you want to apply for and the respective test option/s, and Submit. (You may keep ready the scanned/digital images of your photo/signature in JPEG format, in advance

The dimensions of photo may be of about 200x250 pixels, and the signature may be of about 250 x 125 pixels, both images within 50 kb each in size)

Step 3: Pay the application fee through the Payment Gateway. (Application fee is Rs.1500/- for the first option, and Rs.700/- each for the subsequent options. Use single form for applying for multiple programs and/or through multiple tests)

If you have filled the application form and paid the application fee successfully, you will receive the confirmation by email regarding the acceptance of your online application form

For more details, visit the XUB website www.xub.edu.in

Closing Date:

Last date for Submission form: 31st March 2018  

Comments:

 

To know more Information about course please visit: www.xub.edu.in