ADMISSION NEWS

Portal for Indian Education and Admission Updates

NAVIGATION - SEARCH

National Institute of Plant Health Management, NIPHM, Hyderabad

National Institute of Plant Health Management, NIPHM, Hyderabad

Dept. of Agriculture & Cooperation, Ministry of Agriculture, Government of India 
Rajendranagar 

Hyderabad 
Andhra Pradesh 
Phone-No: 91 40 24013346 24011633 
Fax: 91 40 24015346 
Email: 
infoniphm@nic.in
Website: 
www.niphm.gov.in

About College:

The National Plant Protection Training Institute (NPPTI) was established in 1966 for Human Resource Development in Plant Protection Technology under the Directorate of Plant Protection, to create qualified pest management personnel in adequate numbers both in the Central Government and in the Departments of Agriculture of States/Union Territories (UTs) to impart training to farmers. The Institute has been entrusted with the responsibility of organizing both long and short duration training courses for Human Resource Development on different aspects of Plant Protection.  The activities of the Institute got a fillip in 1974, when international support from United Nations under a UNDP project with a financial assistance of $1.3 million was received from the year 1974 to 1980 to develop the Institute for providing more effective training programmes.  Over the years the Institute has been recognized as a Regional Training Center for Plant Protection by the FAO of the United Nations and also as a Center of Excellence for Training in Plant Protection Technology under the World Bank aided National Agricultural Extension Project - III. NPPTI was one of the components of the ongoing scheme, "Strengthening and Modernization of Pest Management Approach in the Country", which is continuing in the XI Five Year Plan.

In order to bestow greater functional flexibility, and broader reach in delivery against the emerging challenges in the field of Plant Health Management, a very crucial area for enhancing our country's agricultural production, the Department of Agriculture & Cooperation of the Ministry of Agriculture, Govt. of India had taken a decision for transforming this Institute into an autonomous body vide resolution F. No. 20-62/2007-PP I dated 13th October, 2008.

REGISTRATION OF NIPHM

Consequently, the Institute has been registered as an Autonomous Society under the Ministry of Agriculture, Govt. of India, in the Office of the Registrar of Societies, Rangareddy District, Hyderabad, Andhra Pradesh on 24th October, 2008 under the name, National Institute of Plant Health Management with Registration No. 1444 of 2008 under the Andhra Pradesh Societies Registration Act, 2001 (Act No.35 of 2001).

Course Name:

Diploma in Pesticide Management

in National Institute of Plant Health Management, NIPHM, Hyderabad

Course Description:

Diploma in Pesticide Management

Eligibility:

Eligibility and Selection Procedure for Diploma in Pesticide Management in National Institute of Plant Health Management, NIPHM, Hyderabad

Graduates in Life Sciences and Agriculture, Horticulture

Course Name:

Post Graduate Diploma in Plant Health Management PGDPHM

in National Institute of Plant Health Management, NIPHM, Hyderabad

Course Description:

Post Graduate Diploma in Plant Health Management [Specialized Areas: A) Bio-security & Incursion Management, B) Pesticide Management, C) Plant Health Engineering, D) Vertebrate & Structural Pest Management, E) Biocontrol Input Production Management, F) Plant Health Management (with emphasis on Organic Farming)]

Eligibility:

Eligibility and Selection Procedure for Post Graduate Diploma in Plant Health Management PGDPHM in National Institute of Plant Health Management, NIPHM, Hyderabad

Graduates in Agriculture, Horticulture and PG Life sciences

How To Apply:

Application Procedure for Post Graduate Diploma in Plant Health Management PGDPHM in National Institute of Plant Health Management, NIPHM, Hyderabad

Candidates can download application form from the http://niphm.gov.in

The completed application form along with attested copies of mark sheets should reach the Registrar, NIPHM, Rajendranagar, Hyderabad-500030

For more details such as qualification and fee see http://niphm.gov.in

Closing Date:

Last date for Submission form: 30th June 2016

Comments:

 

To know more Information about course please visit: www.niphm.gov.in

Indian Plywood Industries Research and Training Institute, IPIRTI, Bangalore

Indian Plywood Industries Research and Training Institute, IPIRTI, Bangalore

Autonomous Body of the Ministry of Environment & Forests, Govt. of India 
Post Bag No.2273, Tumkur Road, Yeshwanthpur PO 

Bangalore 
Karnataka 
Phone-No: 080- 28394341 28394231 28394232 28394233 
Fax: 080- 28396361 
Email: 
contactus@ipirti.gov.in
Website
: www.ipirti.gov.in

About College:

1962: Indian Plywood Manufacturers’ Research Association (IPMRA) was formed as a co-operative research laboratory under the umbrella of Council of Scientific and Industrial Research (CSIR) for undertaking applied research on PLYWOOD, an important wood based panel material.

1970: The Institute was re-designated as Indian Plywood Industries Research Institute (IPIRI)

1978: Administrative control was transferred to the Ministry of Industry, Govt. of India so as to bring it under user Ministry

1988: Realizing the need for trained manpower for wood based panel industries, training facilities in Mechanical Wood Industries Technology were established with the assistance of Food and Agriculture Organization (FAO)/United Nations Development Programme (UNDP)/Government of India (GOI).

1990: As recognition to the greater role of the Institute in conservation of natural resource, the administrative control was transferred to the Ministry of Environment and Forests, Govt. of India.

1992: As a reflection to its premier position in training for Mechanical Wood Industries Technology as a centre of excellence, the name of the Institute was changed to Indian Plywood Industries Research and Training Institute (IPIRTI)

Course Name:

PG Diploma in Wood and Panel Products Technology PGDWPPT

in Indian Plywood Industries Research and Training Institute, IPIRTI, Bangalore

Course Description:

Post Graduate Diploma in Wood and Panel Products Technology (PGDWPPT)

Eligibility:

Eligibility and Selection Procedure for PG Diploma in Wood and Panel Products Technology PGDWPPT in Indian Plywood Industries Research and Training Institute, IPIRTI, Bangalore

Graduate in Science/ Engineering from any recognized University

Age limit: 28 years (as on 01st Nov 2016) Relaxable for SC/ST/OBC/PH as per GoI Rules.

Age limit is also relaxable for candidates sponsored by Industries.

Selection method: Based on marks obtained in B.Sc/ B.E. Reservations for

SC/ST/OBC/PH will be as per GoI Rules.

How To Apply:

Application Procedure for PG Diploma in Wood and Panel Products Technology PGDWPPT in Indian Plywood Industries Research and Training Institute, IPIRTI, Bangalore

Application Form: 

Application forms for the post graduate diploma course in wood and panel products technology can be downloaded from IPIRTI (www.ipirti.gov.in) and submitted by enclosing Demand Draft Rs. 250/-(non-refundable) drawn in favour of Director, IPIRTI, payable at Bangalore

Career Prospects: Institute facilitates industrial placement of students every year through campus recruitment.

Last Date for receipt of filled in application is 04th September 2016

Closing Date:

04 Sep 2016

Comments:

Last date for Submission form: 04th September, 2016

Comments:

 

To know more Information about course please visit: www.ipirti.gov.in

University of Mysore, UM, Bangalore

University of Mysore, UM, Bangalore

Crawford Hall, Mysore 
Karnataka 
Phone-No: 420161422150 
Email: 
snhegde@usa.net.in
Website: 
www.uni-mysore.ac.in

About College:

The University of Mysore was established on 27th July, 1916 during the benevolent reign of the Maharaja of Mysore, His Highness Nalvadi Krishnaraja Wodeyar (1884-1940). The genesis of the University of Mysore stems from a five year long in-depth reading and analysis on higher education across the globe. The mission of the University of Mysore, laid down in the 1916 regulations published in the Mysore Gazette Extraordinary, aims at ‘promoting teaching and research in conventional and traditional domains of Arts, Humanities, Pure and Applied Sciences and Professional disciplines’. Sir M Visvesvaraya (1860-1962) played a decisive role in the launch of the University. The University, since then, has gone through different phases of development. Started with just two faculties, namely Arts and Science offering BA, BSc, BCom and BT courses, the University added Engineering faculty in 1917, MA programs at Maharaja's College, Mysore. In 1918, MSc program at Central College, Bangalore in 1919 and the faculty of Medicine in Mysore during1924 , thus laying a firm foundation for the multi-faculty character of the university. In 1941, new courses leading to BA honours were added.

During the post-independent period, from 1947-1960, the University enacted new Act of 1956 which ushered in academic autonomy. It also facilitated the introduction of PreUniversity System of education by abolishing intermediate courses. With the support of the University Grants Commission (UGC), which came into existence in 1956, post-graduate education was expanded significantly. In 1960, a major development was the conglomeration of all the post-graduate studies of the University at one location during the tenure of the ViceChancellorship of Dr. K.V. Puttappa. This location was christened "Manasagangotri" meaning ` eternal spring of the mind’ adjacent to Kukkarahalli lake within the heart of the heritage city of Mysore in a picturesque area of 739 acres. The year 1966 was commemorated as the Golden Jubilee year and a corpus fund of Rs 2.85 crores was instituted for awards and prizes under various categories.

Course Name:

Bachelor of Commerce Bachelor of Law (BCom+LLB)

in University of Mysore, UM, Bangalore

Course Description:

Bachelor of Commerce Bachelor of Law (BCom+LLB) programs for the academic session 2016. Integrated Programme

Eligibility:

Eligibility and Selection Procedure for Bachelor of Commerce Bachelor of Law (BCom+LLB) in University of Mysore, UM, Bangalore

A candidate seeking admission shall have passed the Higher Secondary School Examination (10+2) system or an equivalent examination thereto securing the aggregate marks not less than 45% (for SC/ST 40%) of the total marks.

Course Name:

BA LLB Programme

in University of Mysore, UM, Bangalore

Course Description:

BA LLB Programme

Eligibility:

Eligibility and Selection Procedure for BA LLB Programme in University of Mysore, UM, Bangalore

A candidate seeking admission shall have passed the Higher Secondary School Examination (10+2) system or an equivalent examination thereto securing the aggregate marks not less than 45% (for SC/ST 40%) of the total marks.

How To Apply:

Application Procedure for BA LLB Programme in University of Mysore, UM, Bangalore

Candidates can obtain the application form from here.

Send the filled in application form with all the enclosures along with Demand Draft (D.D) of Rs.200/- drawn in the name of “The Finance Officer, University of Mysore, Mysore” by Speed Post / Courier or deliver personally to the Director, Mysore University School Law, Department of Studies in Law building, 2nd Floor, Manasagangothri, Mysore – 570006.

Selection Procedure for University of Mysore:

Selection will be made based the marks obtained in the entrance test.

Closing Date:

25 Jun 2016

Comments:

Entrance Test: 05th July 2016

Last date for Submission form: 25th June 2016

Comments:

To know more Information about course please visit: www.uni-mysore.ac.in

 

 

National Council for Cement and Building Materials, NCCBM, Haryana

National Council for Cement and Building Materials, NCCBM, Haryana

34 KM Stone, Delhi-Mathura Road (NH-2) 

Ballabgarh 
Haryana 
Phone-No: 0129-4192472467468288 2241453 2242051-56 2302300 D 
Fax: 0129-2242100 2246175 
Email: 
nccbm10@bol.net.in
Website: www.ncbindia.com

About College:

National Council for Cement and Building Materials (NCB), then Cement Research Institute of India (CRI) was founded on 24th December 1962 with the objective to promote research and scientific work connected with cement and building materials trade and industry.

Today, NCB is the premier body under the administrative control of Ministry of Commerce and Industry, Govt. of India, for technology development, transfer, continuing education and industrial services for cement and construction industries. Geographically, NCB has its corporate centre and main laboratories located at Ballabgarh (near New Delhi); another well established regional centre at Hyderabad and a Centre at Ahmedabad (Gujarat).

NCB’s areas of work span over the entire spectrum of cement manufacturing and usage – starting with geological exploration of raw materials through the processes, the machinery, the manufacturing aspects, energy and environmental considerations to the final utilization of materials in actual construction, condition monitoring & rehabilitation of buildings and structures.

NCB serves as the nodal agency for providing the Government the necessary support for formulation of its policy and planning activities related to growth and development of cement industry. It is devoted to protect the interests of consumers of cement and concrete in the country. NCB’s stakeholders are Government, Industry and Society, who perceive NCB’s role as discharging national responsibility, providing adequate technology support and improving the quality of life respectively.

Course Name:

PG Diploma in Cement Technology PGDCT

in National Council for Cement and Building Materials, NCCBM, Haryana

Course Description:

Post Graduate Diploma in Cement Technology (PGDCT) (Approved by AICTE, Ministry of HRD, Govt. of India)

Eligibility:

Eligibility and Selection Procedure for PG Diploma in Cement Technology PGDCT in National Council for Cement and Building Materials, NCCBM, Haryana

B.E./BTech. (Chemical Engineering) or M Sc. (Chemistry.)With minimum 60% of marks or equivalent grade

Annual Fee:  

Industry Sponsored Candidates:  Rs. 2, 25,000 (including tuition fee, boarding/lodging, technical visits and other institutional facilities)

Non-sponsored Candidates:  Rs. 60,000 (includes tuition fee and institutional facilities)

How to Apply:

Application Procedure for PG Diploma in Cement Technology PGDCT in National Council for Cement and Building Materials, NCCBM, Haryana

Interested candidates should send their bio-data in the prescribed format to be downloaded from our website www.ncbindia.com latest by 31st July 2016 on the address given below. Sponsored candidates should send their application through their employers. Provisions exist for reservations for SC/ST and persons with disabilities as per Government rules/instructions. Certificate from appropriate authority may be furnished for reserved categories. A non-refundable application fee of Rs. 300/- (Rupees three hundred only),  Rs. 75/- (Rupees Seventy five only) for candidates falling under reserved category, in the form of crossed demand draft/pay order drawn in favour of National Council for Cement and Building Materials payable at Faridabad or New Delhi should be sent along with the duly filled in application form.

Contact:  The Head Centre for Continuing Education Services

National Council for Cement and Building Materials

34 KM Stone, Delhi-Mathura Road (NH-2) Ballabgarh-121 004 (Haryana), India

Phone : +91-129-4192472/467/468/288, 2241453, 2242051-56 Telefax : +91-129-

2302300 (D)

Fax : +91-129-2242100, 2246175

E-mail : nccbm10@bol.net.in  & cceb@ncbindia.com 

Website: www.ncbindia.com

Closing Date:

Last date for Submission form: 31st July 2016

Comments:

To know more Information about course please visit: : www.ncbindia.com

Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

IT Bhawan, Jabalpur Engineering College Campus, Gokalpur, 

Jabalpur 
Madhya Pradesh 
Phone-No: 0761-2632 273 
Fax: 0761-2632 524 
Email: 
query@iiitdmj.ac.in
Website: 
www.iiitdmj.ac.in

About College:

Probably at no previous moment in the world history have commerce and industry become so complex, extensive, and globally interrelated as they are today.India, which is going through a rapid growth in its manufacturing sector, is not unaffected by these changes. The modern manufacturing environment entails a large variety of cross-disciplinary activities including the Design and IT. Engineers consequently are being called upon to work within new environmental, economical and social constraints which are increasingly becoming a part of contemporary engineering practice. Obviously, these elements need to find their way into the engineering curricula. However, traditional engineering instructional formats isolate teaching and research into specific disciplines with un-integrated curricula and therefore the structure of our engineering curricula have hardly changed in accordance with the modern manufacturing needs. Such divisions in the existing higher education formats are found to act as barriers to learning, behavior, and performance.

Another aspect of engineering education which needs to be considered is the basic nature of the IT profession. The IT driven market of today features a model of innovation which is quite different from the research models that most institutes are familiar with. The new market model for innovation emphasizes on fast concept, funds projects with venture capital, fosters innovation by rewarding entrepreneurs who specialize in transforming people's practices to become more productive with the help of new technology. In contrast, the conventional research model emphasizes on careful development of ideas and principles and achieves innovation only after ideas have gone through a long pipeline that distills out the best and brings them into practice over a period of 15-20 years. This dichotomy between the new market-driven model and the conventional idea-pipeline model poses another great challenge to educators of engineering.

The current engineering education system in India, though huge and diverse, is mainly based on the conventional idea of pipeline model. To integrate the knowledge of a given discipline with IT enabled design, prototyping as well as manufacturing considerations, a need therefore exists for developing a new academic programmes. Apart from laying an emphasis on IT, the new approach should also give emphasis on aesthetic, ergonomic and functional considerations of products. The academic programme should also be able to respond to industry driven adaptive management structure.

With above requirements in mind, the Ministry of Human Resource Development (MHRD), Government of India, felt the need to set up a national institute devoted exclusively for Information Technology (IT), Design & Manufacturing (D & M). It was envisaged that such an academic institute would promote excellence in the desired areas of specialization and would facilitate and promote the competitive advantage of Indian products and manufacturing in global markets. Further, the new Institute would serve as an inter-disciplinary institution for education and research by keeping the concept of Product Lifecycle Management (PLM) in mind. The India Institute of Information Technology, Design & Manufacturing (IIITDM) Jabalpur was thus established in January 2005. Strong industry interface and close cooperation with other academic and research institutions are the key features of this Institute.

Course Name:

Bachelor of Design BDes

in Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

Course Description:

Bachelor of Design (BDes)

Eligibility:

Eligibility and Selection Procedure for Bachelor of Design BDes in Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

The candidate should have born on or after October 01, 1995 if belonging to the GEN or OBC-NCL category and on or after October 01, 1990 if belonging to the SC, ST or PwD category.

Candidates should have Class XII (or equivalent) examination in 2016, OR passed or appeared in 2016 for the class XII (or equivalent) examination. Those who appeared for the first time in their Class XII (or equivalent) examination in 2016 or earlier are not eligible.

Course Name:

Master of Design MDes

in Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

Course Description:

Master of Design (MDes)

Eligibility:

Eligibility and Selection Procedure for Master of Design MDes in Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

B.Tech/B.E./B.Arch./B.Des./BFA/M.Sc./M.A./MCA with (a) minimum marks/CPI in Qualifying Degree and (b) valid CEED score for regular students.

Minimum marks/CPI in Qualifying Degree for M.Des.: 55% marks / 5.5 CPI (on a 10-point scale) as long as it is at least seven percent higher than the minimum pass marks /CPI for General Category applicants and minimum passing marks for SC/ST/OBC applicants.

General information:

Reserved seats will be filled as per Govt. of India rules,

Institute Assistantship is provided to M.Des. students as per Govt. of India rules.

Course Name:

PhD Electronics and Communication Engineering

in Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

Course Description:

PhD (Electronics & Communication Engineering)

Eligibility:

Eligibility and Selection Procedure for PhD Electronics and Communication Engineering in Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

M Tech/ ME in Electronics/ Electronics & Communication Engineering/ Electrical Engineering or a similar discipline with minimum marks/ CPI in Qualifying Degree.

 

Minimum % of marks in Qualifying Degree for Ph.D.: 55% marks or CPI of 5.5 (on a 10-point scale) for General Category applicants and minimum passing marks for SC/ST/OBC applicants

 

General information:

Reserved seats will be filled as per Govt. of India rules,

Institute Assistantship is provided to Ph.D. students as per Govt. of India rules.

How To Apply:

Application Procedure for PhD Electronics and Communication Engineering in Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

Application Form: The detailed information about on line application for PG admission can be downloaded from the Institute website www.iiitdmj.ac.in

Filled up application forms along with a demand draft of Rs 500/- for general/OBC and Rs 300/- for SC/ST category candidates, in favor of the Registrar, PDPM IIITDM Jabalpur, issued by any nationalized bank, payable at Jabalpur must be received through speed/registered post only
Applicants must write the programme and the discipline applied for, on the cover of the envelope
The list of short listed candidates and other announcements regarding admission will be uploaded on Institute’s website 
www.iiitdmj.ac.in 

Comments:

 

To know more Information about course please visit: www.iiitdmj.ac.in

Baba Farid University of Health Sciences, BFUHS, Faridkot

Baba Farid University of Health Sciences, BFUHS, Faridkot

Punjab University 
Sadiq Road
, Faridkot 

Faridkot, Punjab 
Phone-No: 91-01639-256232 256236 
Email: 
generalinfo@babafariduniv.com
Website: 
www.bfuhs.ac.in

About College:

Baba Farid University of Health Sciences was established under an Act passed by the Legislature of the State of Punjab in July, 1998. The mission of the University is to create an intellectual, academic and physical environment, conducive to free flow of ideas and exchange of information between various faculties of the University and between this University and other Universities of Health Sciences in the country and abroad,thereby opening a window to the world for the health professionals, health planners, health managers, biomedical and social scientists and educators in health sciences of the country .

Established in the memory of great Sufi Saint Baba Farid by Punjab govt. in July, 1998 by an Act of the State Legislature.

Fifth of its kind in India, First in Northern India- Punjab Govt. deserves the credit of establishing it.Due to inadequacy of health professionals(in quantity & quality) the need was imminent. Such a University is expected to be a “Pace-setter” – in developing appropriate modes & models of Health Care. University committed to providing Community oriented need based education & Training programmes for Health professionals.

Recognition of Degrees  

His Excellency the Governor of Punjab has recognized all the degrees and diplomas certificates and other academic distinctions awarded by the this University w.e.f. 1st July, 1999.

The Govt. of India has recognized the MBBS, MD/MS/PG Diploma/BDS/Bsc(Nursing)/M.Sc.(Nursing) being awarded by Baba Farid University of Health Sciences

DCI/CCH/CCIM has recommended to Govt. of India for the recognition of MDS/BHMS/BAMS degrees awarded by this University

Membership  

Association of Indian Universities, New Delhi

SAARC Universities

Association of Commonwealth Universities, London

University Grants Commission under Section 2(f) of its Act, 1956.

Included in the World Health Directory of Medical Schools.

Course Name:

BSc in Nursing

in Baba Farid University of Health Sciences, BFUHS, Faridkot

Course Description:

BSc in Nursing

Eligibility:

Eligibility and Selection Procedure for BSc in Nursing in Baba Farid University of Health Sciences, BFUHS, Faridkot

Candidate should have passed:

The higher secondary examination or the Indian School Certificate Examination which is equivalent to 10+2 Higher Secondary Examination after a period of 12 years study, the last two years of study comprising of Physics, Chemistry and Biology with minimum 45% (40% for SC/ST/BC) marks in PCB after the introduction of the 10+2+3 years education structure Or

Any other examination which, in scope and standard is found to be equivalent to the Intermediate Science examination of an Indian University/Board, taking Physics, Chemistry and Biology/ Biotechnology including a practical test in each of these subjects with minimum 45% (40% for SC/ST/BC) marks in PCB.

How to Apply:

Application Procedure for BSc in Nursing in Baba Farid University of Health Sciences, BFUHS, Faridkot

Candidates can apply online.

Rs. 3000/- for general category (Rs. 1500/- for SC categories only) should be deposited in any branch of the Oriental Bank of Commerce throughout India by using Bank challan form which is generated after applying online through university web.

Selection Procedure for BFUHS, Faridkot:

Candidates will be selected on the basis of the aggregate marks secured in the Punjab Para Medical Entrance Test (PPMET 2016) conducted by the university.

Closing Date:

Entrance Test: 20th July 2016

Last date for Submission form: 29th June 2016

Comments:

To know more Information about course please visit: www.bfuhs.ac.in

Apparel Training and Design Centre, ATDC, Gurgaon

Apparel Training and Design Centre, ATDC, Gurgaon

Sponsored by Apparel Export Promotion Council, Ministry of Textiles, Govt of India 
Apparel House, Institutional Area, Sector-44 

Gurgaon 
Haryana 
Phone-No: 95124-2708000123 09810822137 
Fax: 0124-27080045 
Email
: info@atdcindia.co.in
Website: www.atdcindia.co.in

About College:

Apparel Training & Design Centre (ATDC) has emerged as India’s Largest Vocational Training Network for the Apparel Sector with over 150 ATDCs including 25 ATDC Vocational Institutes and over 150 ATDC- SMART Peripatetic Centres and Skill Camps at present in major Apparel clusters spread across 20 states PanIndia.

ATDC’s National Head Office at "PARIDHAN VIKAS BHAWAN" in Sector-44, Gurgaon manages and monitors the activities of the Pan-India network of ATDC Vocational Institute & Centres and also over sees implementation of the SMART Project. The new building was inaugurated by the Secretary Textiles, MOT, GOI on 22nd November, 2010. 

ATDC’s aim is to train skilled workforce for the rapidly growing export and domestic sectors of the Apparel Industry and upgrade the technical skills to improve quality, productivity and efficiency in a global context. In ATDCs journey of “Skilling the Apparel Sector” it now has the largest network of 25 ATDC Vocational Institutes offering Certificate, Diploma & Associate Degree Programmes and over 150 ATDC-SMART Centres & Skill Camps offering 1-4 months Certificate Programmes under its banner. ATDC plans to expand to a total of 250 ATDC SMART Peripatetic Centres, under the ISD Scheme in the ensuing 2-3 years.

Currently ATDC offers Programmes under two pathways-

ATDC Vocational Institute

ATDC-SMART Training Project

ATDC VOCATIONAL INSTITUTE

ATDC has tied up with IGNOU through a long term MOU for establishing 25 ATDC - Vocational Institutes Pan India with an objective to create a ‘college for the community’ with a focus on employability in the apparel and allied sectors.

This step has been a significant one in making available proper Certification System through IGNOU’s validation processes and offering proper progression towards an Associate Degree. This initiative of ATDC has a positive cascading impact on improving the skill base for both the domestic and export manufacturing sectors of Textile and Apparel Industries and at the same time offering opportunity for graduation and further higher studies.

Course Name:

BVoc Fashion Design and Retail

in Apparel Training and Design Centre, ATDC, Gurgaon

Course Description:

BVoc Fashion Design and Retail

Eligibility:

Eligibility and Selection Procedure for BVoc Fashion Design and Retail in Apparel Training and Design Centre, ATDC, Gurgaon

10+2 in any stream. Candidats whose results are awaited can also apply on provisional basis.

Selection Procedure: The candidates will be selected on the basis of performance in screening Test, Skype Interviews

Rules of Reservation: Reservation of seats as pr the Government of India rules apply.

Course Name:

Certificate in Garment Construction Techniques CGCT

in Apparel Training and Design Centre, ATDC, Gurgaon

Course Description:

Certificate in Garment Construction Techniques (CGCT)

Eligibility:

Eligibility and Selection Procedure for Certificate in Garment Construction Techniques CGCT in Apparel Training and Design Centre, ATDC, Gurgaon

10th Pass (Student with higher Qualification and experience will be given preference.)

Admission Procedure:

The training courses are open to both men and women who possess the minimum educational qualifications.

The management reserves the right to offer the batch only in case of sufficient number of selected candidates.

The admissions are scheduled twice in the calendar year i.e. January session & July session by advertising the admission notice in the Employment news and leading news papers etc. for Core Courses.

The admissions are scheduled once in the calendar year i.e. July session by advertising the admission notice in the Employment news and leading news papers etc. for Flagship Courses.

The application form can also be down loaded from the website.

The application duly filled in along with attested copies of degree/certificates/mark sheets, fees as applicable and two passport size photograph (one to be pasted on the application form) is to be submitted to the respective Training Centre either directly or by registered post.

Admission is based on merit cum means basis and FCFS basis with personal interview

Fee: 11000/-

Course Name:

Diploma Fashion Design and Technology DFDT

in Apparel Training and Design Centre, ATDC, Gurgaon

Course Description:

Diploma Fashion Design and Technology (DFDT)

Eligibility:

Eligibility and Selection Procedure for Diploma Fashion Design and Technology DFDT in Apparel Training and Design Centre, ATDC, Gurgaon

10 +2 pass or equivalent. Candidates with creative aptitude will be given preference.

Admission Procedure:

The training courses are open to both men and women who possess the minimum educational qualifications.

The management reserves the right to offer the batch only in case of sufficient number of selected candidates.

The admissions are scheduled twice in the calendar year i.e. January session & July session by advertising the admission notice in the Employment news and leading news papers etc. for Core Courses.

The admissions are scheduled once in the calendar year i.e. July session by advertising the admission notice in the Employment news and leading news papers etc. for Flagship Courses.

The application form can also be down loaded from the website.

The application duly filled in along with attested copies of degree/certificates/mark sheets, fees as applicable and two passport size photograph (one to be pasted on the application form) is to be submitted to the respective Training Centre either directly or by registered post.

Admission is based on merit cum means basis and FCFS basis with personal interview

Fee: 70000/-

How To Apply:

Application Procedure for Diploma Fashion Design and Technology DFDT in Apparel Training and Design Centre, ATDC, Gurgaon

Application form can be obtained on payment of Rs 250/- by cash or in case by post Rs 300/- by way of Demand Draft in favour of “Apparel Training and Design Centre” payable at any following centres. Selection will be made on the basis of an aptitude test / personal interview as deemed fit. Application form duly filled-in along with course fee by way of Demand Draft drawn in favour of “Apparel Training and Design Centre” may be submitted. ATDC Knowledge Portal www.atdcindia.co.in for more information.

The duly filled in application form should reach the ADTC-NHO, Paridhan Vikas Bhawan, Plot No 50, Institutional Area, Sector-44, Gurgaon-122003, Haryana, Tel-0214-4659542, Email enquiries: admissions@atdc.co.in or Call Toll Free No. 1800-307-02080

For further details, please visit website www.atdcindia.co.in

Closing Date:

Last date for Submission form: 25th July 2016

Comments:

 

To know more Information about course please visit: www.atdcindia.co.in

IGNOU OPENMAT-XL 2017

Indira Gandhi National Open University

(A central university under MHRD, established by an act of Indian Parliament)
Maidan Garhi, New Delhi-110068, Website www.ignou.ac.in

Indira Gandhi National Open University (IGNOU), New Delhi has announced the exam dates for OPENMAT-XL 2017, which will be conducted in August 2016. The OPENMAT-XL will be held on Sunday, August 21, 2016.

OPENMAT-XL is conducted for taking admission to Master of Business Administration (MBA), Diploma in Management (DIM), Post-Graduate Diploma in Management (PGDIM), Post Graduate Diploma in Human Resource Management (PGDHRM), Post-Graduate Diploma in Financial Management (PGDFM), Post-Graduate Diploma in Operations Management (PGDOM), Post-Graduate Diploma in Marketing Management (PGDMM) and Post-Graduate Diploma in Financial Markets Practice (PGDFMP) programs for the session 2017.

Eligibility Criteria for OPENMAT-XL 2017:

Ø       Candidates should have a graduation in any discipline with 50% marks for general category, 45% for reserved category, with 3 years managerial, supervisory, professional experience. Or

Ø       A professional degree with 50% marks in Engineering, Medicine, Chartered Accountancy (ICAI), Cost and Works Accountancy (ICWAI), Company Secretaryship (ICSI),Law.

Ø       There is no age bar.

Application Procedure for OPENMAT-XL 2017:

Ø       Application form can be downloaded from here.

Ø       The candidates downloading the form from website are required to send a demand draft of Rs. 1,050/- drawn in favour of IGNOU payable at New Delhi.

Ø       Filled in applications must reach, the Registrar (SED), IGNOU, Maidan Garhi, New Delhi - 110068, by registered post, speed post.

Paper Pattern for OPENMAT-XL 2017:

The OPENMAT-XL exam has 4 tests:

Test 1                    General Awareness             No. of questions: 30

Test 2                    English Language                No. of questions: 50

Test 3                    Quantitative Aptitude                   No. of questions: 50

Test 4                    Reasoning                         No. of questions: 70

All questions will be compulsory.

There will be 200 questions.

Total duration of the test will be 180 minutes.

No credit will be given for multiple answers for single question.

There is no negative marking for wrong answers.

Use of calculators will not be allowed. Students need to do rough work in the space provided at the end of the test booklet

Important Dates:

Last date for submission of application form: Friday, July 15, 2016.

Date of OPENMAT-XL exam: Sunday, August 21, 2016.

Comments:

 

To know more Information about entrance please visit: www.ignou.ac.in

Central Teacher Eligibility Test (CTET) September 2016

Central Board of Secondary Education, Delhi

Central Teacher Eligibility Test Unit

PS 1-2, Institutional Area, IP Extn, Patparganj, Delhi-110092

Ph. No. 011-22235774, 22240104 Fax: 011-22235775

Email: ctet@cbse.gov.in

Central Teacher Eligibility Test (CTET) September, 2016

The Central Board of Secondary Education, Delhi will be conducting the 10th Edition of Central Teacher Eligibility Test (CTET) on 18.09.2016 (Sunday) for a candidate to be eligible for appointment as a teacher for classes I to VIII. Candidates can apply only on-line for CTET-SEPT 2016 on CBSE, CTET website 

Eligibility:

The candidates having the following minimum educational qualification are eligible for appearing in CTET.

1. Minimum Educational Qualifications for becoming Teacher for Classes I-V (Primary Stage):

Senior Secondary (or its equivalent) with at least 50% marks and passed or appearing in final year of 2- year Diploma in Elementary Education (by whatever name known)

OR

Senior Secondary (or its equivalent) with at least 45% marks and passed or appearing in final year of 2- year Diploma in Elementary Education (by whatever name known), in accordance with the NCTE (Recognition Norms and Procedure), Regulations, 2002.

OR

Senior Secondary (or its equivalent) with at least 50% marks and passed or appearing in final year of 4-year Bachelor of Elementary Education (B.El.Ed).

OR

Senior Secondary (or its equivalent) with at least 50% marks and passed or appearing in final year of 2-year Diploma in Education (Special Education)*.

OR

Graduation and passed or appearing in final year of two year Diploma in Elementary Education (by whatever name known).

2. Minimum Qualifications for becoming Teacher for Classes VI-VIII: Elementary Stage

Graduation and passed or appearing in final year of 2-year Diploma in Elementary Education (by whatever name known).

OR

Graduation with at least 50% marks and passed or appearing in 1-year Bachelor in Education (B.Ed).

OR

Graduation with at least 45% marks and passed or appearing in 1- year Bachelor in Education (B.Ed), in accordance with the NCTE (Recognition Norms and Procedure) Regulations issued from time to time in this regard.

OR

Senior Secondary (or its equivalent) with at least 50% marks and passed or appearing in final year of 4- year Bachelor in Elementary Education (B.El.Ed).

OR

Senior Secondary (or its equivalent) with at least 50% marks and passed or appearing in final year of 4- year B.A, B.Sc.Ed or B.A.Ed, B.Sc.Ed.

OR

Graduation with at least 50% marks and passed or appearing in 1-year B.Ed. (Special Education)*.

3. Note:

i.        Relaxation up to 5% in the qualifying marks in the minimum Educational Qualification for eligibility shall be allowed to the candidates belonging to reserved categories, such as SC, ST, OBC, Differently abled.

ii.      Diploma, Degree Course in Teacher Education: For the purposes of this Notification, a diploma, degree course in teacher education recognized by the National Council for Teacher Education (NCTE) only shall be considered. However, in case of Diploma in Education (Special Education) and B.ED (Special Education), a course recognized by the Rehabilitation Council of India (RCI) only shall be considered.

iii.    Training to be undergone: A person with D.Ed (Special Education) qualification shall undergo, after appointment an NCTE recognized 6-month Special Programme in Elementary Education.

iv.   The minimum qualifications referred above apply to teachers of Languages, Social Studies, Social Science, Mathematics, Science etc. In respect of teachers for Physical Education, the minimum qualification norms for Physical Education teachers referred to in NCTE Regulation, dated 3rd November, 2001 (as amended from time to time) shall be applicable. For teachers of Art Education, Craft Education, Home Science, Work Education, etc. the existing eligibility norms prescribed by the State Governments and other school managements shall be applicable till such time the NCTE lays down the minimum qualifications in respect of such teachers.

v.     Candidates who are appearing in the final year of Bachelor Degree in Education or Diploma in Elementary Education etc. are provisionally admitted and their CTET Certificate shall be valid only on passing the aforesaid Examinations.

vi.   The candidate not having any of the above qualification shall not be eligible for appearing in Central Teacher Eligibility Test.

How to Apply:

Instructions and Procedure for submission of Online Application Form of CTET - SEPT 2016

1. Please read the Information Bulletin of CTET - SEPT 2016 carefully before you start filling the Online Application Form.

2. Candidates can apply for CTET - SEPT 2016 ‘ON-LINE’ through website

For ‘ON-LINE’ SUBMISSION - website 

Candidates can apply ‘ON-LINE’ at CTET website. The candidate should supply all details while filling the Online Form. Candidate should enter his particulars i.e. Name, Father Name, Mother Name & Date of Birth as per his, her Secondary Education Board Class X Certificate. Candidates are required to take a print out of the computer generated Confirmation Page with Registration Number after successful submission of data.

3. Examination Fees

Category

General, OBC Category

SC, ST, Differently Abled Category

Only Paper – I or II

Rs. 600/- - (Six Hundred)

Rs. 300/ - (Three Hundred)

Both Paper – I & II

Rs. 1000/ - (One Thousand)

Rs. 500/ - (Five Hundred)

Service Charges & Service Taxes (as applicable) will be charged extra by the Bank

The fee can be remitted in the following ways: 

Ø       Through Challan by deposit of prescribed fees in CBSE Account with Syndicate Bank or Canara Bank 

Ø       By Debit, Credit Card.

4. Application Procedure: 4 Simple Steps to be followed to apply online

Step 1: Fill in the Online Application Form and note down system generated Registration No. The candidate should supply all details while filling the Online Form. The Application Form mainly contains the personal details and contact details of the candidates. After successful submission of the data, Registration No. will be generated and it will be used to complete the remaining Steps of the Application Form and also required for all future correspondence.

Step 2: Upload Scanned Images of Photograph and Signature 

Note: 
The scanned images of photographs and signature should be in jpg format.

Size of the photo image must be greater than 4 kb and less than 100 kb.

Size of the signature image must be greater than 1 kb and less than 25 kb.

Image Dimension of photograph should be 3.5 cm (width) * 4.5 cm (Height) only

Image Dimension of signature should be 3.5 cm (length) * 1.5 cm (Height) only

*NOTE: THE Candidate particulars can be edited till the payment of fees by Debit, Credit Card has not been made or the challan is not downloaded. Once the payment of fee has been made, challan downloaded, candidate particulars cannot be edited at this stage. Thereafter corrections can be made only during the period in which on-line corrections will be allowed as per the given schedule of CTET - SEPT 2016.

Step 3: Pay Examination Fee by challan or debit, credit card: 

For Payment by Syndicate Bank, Canara Bank challan: The candidate has to select “Bank e-Challan” (Syndicate, Canara Bank) to submit the application fee through bank. As soon as he, she selects, an e-Challan will be generated containing details of the candidate along with amount to be paid as per their category and paper(s) opted. The candidate has to take a printout of the same and take it to the nearest Core Banking Service (CBS) facility enabled Branch of the respective Bank for making payment. After payment, the candidate has to login again to the system and enter the details written on the e-Challan by the bank official like Transaction ID, Branch Code, Branch Name and date of fee deposit. After the details are uploaded, a Confirmation Page will be generated. OR Candidate can also pay fee by Debit, Credit Card of any bank.

Step 4: Download Confirmation Page for your record and future reference, if required.

Note: Candidates are NOT REQUIRED to send hard copy of confirmation page to CTET unit. However, the candidates are advised to retain the hard copy of the application i.e. confirmation page, challan if fees is paid by challan, for future reference

Important Dates:

Submission of On-line application: 22.06.2016 to 18.07.2016

Last Date for submission of fee through E-challan or Debit, Credit Card: 19.07.2016 (Before 3:30 PM)

Final status of Candidates-Check Status & Particulars of candidates whose fees received: 20.07.2016

Period for On-line Corrections in Particulars (No correction will be allowed in any particulars after this date): 20.07.2016 to 25.07.2016

Download Admit Card from CTET website: 17.08.2016

Schedule of Examination

Date of Examination           Paper              Timing                                    Duration

18.09.2016                            Paper-II         09:30 to 12:00 Hours          2:30 Hours

18.09.2016                            Paper-I          14:00 to 16:30 Hours          2:30 Hours

Comments:

To know more Information about entrance please visit: http://ctet.nic.in/CMS/Public/Home.aspx

GATE 2017, Graduate Aptitude Test in Engineering 2017

Indian Institute of Technology (IIT), Roorkee has announced the exam dates for online Graduate Aptitude Test in Engineering (GATE 2017), which will be conducted in February 2017. The GATE will be held from Saturday, February 04, 2017 to Sunday, February 05, 2017 and Saturday, February 11, 2017 to Sunday, February 12, 2017.

GATE is conducted annually for admissions to postgraduate programs (master’s and doctoral) in the country, with MHRD and other Government Scholarships, Assistantships in Engineering, Technology, Architecture, Science, is open to those who qualify in GATE. The GATE score is also used by some PSUs for their recruitment

Eligibility Criteria for GATE 2017:

·         Candidates in the following categories only are eligible to appear for GATE:

·         Bachelor’s degree holders in Engineering, Technology (4 years after 10+2 or 3 years after Diploma in Engineering, Technology) and those who are in the final year of such programs.

·         Bachelor’s degree holders of Architecture (Five years course) and those who are in the final year of such programs.

·         Bachelor’s degree holders of Four-year program in Science (B.S.) and those who are in the final year of such programs.

·         Master’s degree holders in any branch of Science, Mathematics, Statistics, Computer Applications or equivalent and those who are in the final year of such programs.

·         Holders of four-year integrated master’s degree (post-B.Sc.) in Engineering, Technology and those in the second or higher year of such programs.

·         Holders of five-year integrated master’s degree or dual degree in Engineering, Technology and those in the fourth or higher year of such programs.

·         Holders of Five-year integrated M.Sc. or Five year integrated B.Sc., M.Sc. degree and those in the final year of such programs

How to Apply:

Application Procedure for GATE 2017:

·         Candidates can apply online from Tuesday, September 01, 2016.

·         The application fee is Rs. 750/- for women candidates, Rs. 750/- for the SC, ST, PwD category candidates and Rs. 1500/- for all others.

·         The application fee can be paid either online or through e-challan (additional bank charges may apply). The application fee is non-refundable.

Paper Pattern for GATE 2017:

·         The GATE examination consists of a single paper of 3-hour duration that contains 65 questions carrying a maximum of 100 marks.

·         The question paper will consist of both multiple choice questions (MCQ) and numerical answer type questions.

·         The examination for all the papers will be carried out in an online Computer Based Test (CBT) mode where the candidates will be shown the questions in a random sequence on a computer screen.

·         The candidates are required to either select the answer (for MCQ type) or enter the answer for numerical answer type question using a mouse on a virtual keyboard (keyboard of the computer will be disabled).

·         Candidates will be provided with blank paper sheets for rough work and these have to be returned back after the examination.

·         At the end of the 3-hour window, the computer will automatically close the screen from further actions.

Top 5 GATE score accepting Institutes:

Indian Institute of Science (IISc), Bangalore

Indian Institute of Technology Madras (IIT-M)

Indian Institute of Technology, Delhi (IIT-D)

National Institute of Technology (NITW), Warangal

Indian Institute of Technology (IIT R), Roorkee

Important Dates:

Start date for online application: Thursday, September 01, 2016.

Last date for online application: Tuesday, October 04, 2016.

Last date for request for change in the choice of examination city: Wednesday, November 16, 2016.

Availability of admit card: Thursday, January 05, 2017.

Date of GATE: Saturday, February 04, 2017 to Sunday, February 05, 2017 and Saturday, February 11, 2017 to Sunday, February 12, 2017.

Announcement of Results: Monday, March 27, 2017.

Comments:

To know more Information about course please visit: http://gate.iitr.ernet.in/