ADMISSION NEWS

Portal for Indian Education and Admission Updates

NAVIGATION - SEARCH

Academy of Scientific and Innovative Research, AcSIR, Ghaziabad

Academy of Scientific and Innovative Research, AcSIR, Ghaziabad

CSIR- Human Resource Development Centre, (CSIR-HRDC) Campus
Postal Staff College Area,
Sector 19, Kamla Nehru Nagar,
Ghaziabad, Uttar Pradesh- 201002
Ph: +91-120-2783009 (L), +91-9266600847 (M), 9266600947 (M)
Contact Us: admission2020@acsir.res.in Website: www.acsir.res.in

About College:

Established in 2011 as an ‘Institution of National Importance’ (interim operations started in June, 2010), the Academy of Scientific and Innovative Research (AcSIR) has adopted the mandate to create and train some of the best of tomorrow’s Science & Technology leaders through a combination of innovative and novel curricula, pedagogy and evaluation. AcSIR’s focus will be on imparting instruction and providing research opportunities in such areas that are not routinely taught in regular academic universities in India.

It has been set up based on a ‘Hub and the Spokes’ model where hub is responsible for centralized administrative functions. The spokes are located in the 37 laboratories and 6 units of CSIR spread along the length and breadth of India, which act as actual campuses for different subjects or areas depending on their respective specializations. At present, the Academy has 2478 faculty members from CSIR Laboratories, 36 Adjunct faculty members, Over 3000 students enrolled in various programmes and 21 non-academic staff members.

Course Name:

PhD (Sciences)

Eligibility:

PhD (Sciences)

Candidates with a Bachelor's degree in Engineering/ Technology, Medicine or Master's degree in Science are eligible to apply. The candidate should be having a valid National level fellowship (JRF/ SRF of various funding agencies, e.g. CSIR, UGC, DBT, DST etc.) or any other equivalent fellowship like INSPIRE, RGNF etc.

Project Assistants, Senior Research Fellows, Group-IV Scientists and Group-III Technical Staff of CSIR are also eligible to apply (as per relevant AcSIR rules).

Sponsored PhD (Sciences):

Master’s degree in Science with endorsement from Industry, Academic or Research Institutes for required academic leave and financial support during program.

Applicants qualifying their degree in percentage shall use the formula, CGPA=(Percentage + 5) /10. Applicants with percentage ≥ 95%, shall fill 10 CGPA in the Online Application Form.

Course Name:

PhD (Engineering) and Sponsored PhD (Engineering)

Eligibility:

(i)    A Master’s degree in Engineering or Technology following a four-year engineering/technology or 4/5 year science degree; or an integrated minimum-5-year M Tech degree; or equivalent. AND

(ii)     At least one of the following

(a)     Awarded a national-level fellowship (such as NET JRF) tenable at CSIR institutes

(b)    Meeting all the conditions required for eligibility for the CSIR-SRF

(c)     Meeting all the conditions for award of the INSPIRE fellowship (typically awarded to students ranked first in the University)

(d)    Meeting all the conditions stipulated by AcSIR for Project Assistants to register for a PhD

(e)    Meeting all the conditions stipulated by AcSIR for industry-sponsored* students.

Project Assistants, Senior Research Fellows, Group-IV Scientists and Group-III Technical Staff of CSIR are also eligible to apply (as per relevant AcSIR rules).

Course Name:

Integrated Dual-Degree IDDP (Integrated M.Tech-Ph.D) Program

Eligibility:

(i)      A 4-year undergraduate degree in Engineering or Science (such as BE/BTech/BS), or a five year degree in Science (such as MSc), or equivalent. AND

(ii)     At least one of the following

(a)     Awarded a national-level fellowship (such as NET JRF) tenable at CSIR institutes

(b)    Meeting all the conditions required for eligibility for the CSIR-GATE-JRF

(c)     Meeting all the conditions for award of the INSPIRE fellowship (typically awarded to students ranked first in the University)

(d)    Meeting all the conditions stipulated by AcSIR for Project Assistants to register for a PhD

(e)    Meeting all the conditions stipulated by AcSIR for industry-sponsored* students.

Project Assistants, Senior Research Fellows, Group-IV Scientists and Group-III Technical Staff of CSIR are also eligible to apply (as per relevant AcSIR rules).

* with endorsement from Industry, Academic or Research Institutes for required academic leave and financial support during program.

These are only minimum quality yardsticks of eligibility for consideration for admission and bear no relationship with financial assistance or scholarship. Any stipend, scholarship or financial source for study would be the sole responsibility of the student. AcSIR itself does not provide any such scholarship or have any rule in these matters.

How to Apply:

For Admission Process, you need to follow two phases:

1.    Sign-Up phase: In Sign-Up phase, once you successfully Sign-Up on AcSIR Online Admission Portal, you will be receiving auto email on your email-id with login credentials and link to be re-directed for further complete admission form fill-up process.

2.    Online Application Form Phase: On completion of AcSIR Online Application form, AcSIR Application Number (AAN) will be generated e.g. AcSIR12345. This AAN shall be used in future correspondence between applicant and AcSIR.

3.    Print Acknowledgement of Admission Receipt with AcSIR Application Number (AAN).

(Please note: Candidates who are choosing CSIR-IGIB as one of the preferred Labs must fill up this online form only after reading the instructions on the CSIR-IGIB application portal on the institute website, available with effect from 27 September 2019 at IGIB website.

·         Important dates of admission process and any other update or information will be flashed on Portal-Please check regularly.

·         For each Program of study, only one application is allowed for an applicant. If, at any time, it is found that more than one application is filled by a candidate then the candidature will be summarily rejected.

·         Short-listed  candidates  will  be  intimated electronically  and  they  will  be  required  to appear  for  Test and/or Interview at  the designated centres on the dates announced, based on which final selection would be made.

·         Number of seats available in each program at each Institute may vary.

To know more information about how to apply please contact here:

Academy of Scientific and Innovative Research (AcSIR)

CSIR- Human Resource Development Centre, (CSIR-HRDC) Campus

Postal Staff College Area,

Sector 19, Kamla Nehru Nagar,

Ghaziabad, Uttar Pradesh- 201002

Ph: +91-120-2783009 (L), +91-9266600847 (M), 9266600947 (M)

Contact Us: admission2020@acsir.res.in

Closing Date:

Commencement of Online Admission Portal: 20th September, 2019

Last date of submission of Online Application: 24th October, 2019

Aptitude Test/Interview: 19th November, 2019 To 16th December, 2019

Comments:  

To know more Information about entrance please visit: www.acsir.res.in/admissions/

Indian Institute of Technology, IIT, Madras

Indian Institute of Technology, IIT, Madras
I.I.T Post Office
Madras, Tamil Naduu
Phone-No: 044- 2257 8133
Fax: 044-2257 0509
Email: itc@iitm.ac.in Website: www.iitm.ac.in
Establish: 1959

About College::

Indian Institute of Technology Madras is one among the foremost institutes of national importance in higher technological education, basic and applied research. In 1956, the German Government offered technical assistance for establishing an institute of higher education in engineering in India. The first Indo-German agreement in Bonn, West Germany for the establishment of the Indian Institute of Technology at Madras was signed in 1959.

Course Name:

Post Graduate Program for Executives for Visionary Leadership in Manufacturing (PGPEVLM) 14th Batch [Course offered by: IIMC, IITK and IITM]

Eligibility:

Graduate engineers with first division/First Class marks from class X onwards with minimum 4.5 years to maximum 10 years work experience (for self-sponsored candidates) or minimum 4.5 years work experience (for sponsored candidates with study leave) in manufacturing, engineering and related sectors. for further details and online application, visit www.iitk.ac.in/ime/vlm/

How to Apply:

Last date of Submission of duly filled and signed online application along with Application fee of INR 3500/- through DD in favour of "Indian Institute of Technology, Kanpur" is Monday, November 04, 2019. Aptitude test will be held on sunday, December 01, 2019 at four cities, namely Kolkata, Mumbai, delhi and chennai. Shortlisted candidates will be called for personal interview (PI) to be held on sunday, December 22, 2019 at IIT Kanpur. Selection will be based on academic records, work experience, and performance in the PI.

For further queries, Call +91 512 2596590/ 2596562 or email to: vlmp@iitk.ac.in

Closing Date:

Last date of Submission of duly filled and signed online application along with Application fee: 04th November, 2019

Comments:

To know more Information about this courses please visit: www.iitm.ac.in

Institute of Management Technology, IMT, Ghaziabad

Institute of Management Technology, IMT, Ghaziabad
Raj Nagar, Post Box No. 137
Ghaziabad, Uttar Pradesh 201001
Phone: 0120 3002200
Fax: 0120 2827895
Email: admissions@imt.edu Website: www.imt.edu

About College:

Established in 1980, Institute of Management Technology, Ghaziabad (IMTG) is India’s premier AACSB accredited management school with a distinct focus on grooming leadership through Innovation, Execution and Social Responsibility. An autonomous, not–for–profit institute, offering highly sought after postgraduate programmes over the past more than three–and–a–half decades, IMTG currently offers four AICTE approved programmes – Post Graduate Diploma in Management (PGDM) Full Time, PGDM Executive, PGDM Part Time, and PGDM Dual Country Programme (DCP). While the first three programmes are offered at the IMTG campus in Ghaziabad, Delhi NCR, India, the PGDM DCP is offered in collaboration with the IMT Dubai campus. IMTG has been consistently ranked among the top management institutes of the country. Today, it is the proud alma mater of more than 300 C–suite executives and thousands of professionals serving in leadership positions in the best known organisations in India and around the world, in key business functions of Sales, Operations, Human Resources, Consulting, Information Technology, Marketing, and Finance among others.

Course Name:

PGDM, PGDM DCP & MBA {2 year full-time globally accredited residential programmes at different IMT campuses [IMT Ghaziabad, Nagpur, Hyderabad, Dubai]}

Eligibility:

Applicants for all IMT PGDM and MBA programs must have a minimum three-year Bachelor’s degree or equivalent with minimum 50 percent aggregate marks in any discipline. Applicants who are appearing for the final-year degree examination can also apply, subject to submission of all mark sheets and pass certificate to IMT’s Academic Program office at a later date. Failing to do so will result in admission being cancelled.

IMT Ghaziabad:

To apply for IMT Ghaziabad’s two year PGDM program, applicants must be registered for CAT-2019 OR XAT-2020 OR have taken/taking the GMAT (January 1, 2016 – February 28, 2020). In the case of the candidates applying on the basis of GMAT and score is not provided, processing of application will be provisional, subject to IMT receiving the official GMAT score on or before March 15, 2020.

IMT Nagpur and IMT Hyderabad:

To apply for IMT Nagpur and Hyderabad’s 2 year PGDM program, applicants must be registered for CAT-2019 OR XAT-2020 OR CMAT- January,2020*  OR have taken the GMAT (1st January 2016 – February 28, 2020). In case of the candidate(s) applying on the basis of GMAT and score is not provided, processing of application will be provisional, subject to IMT receiving the official GMAT score on or before March 15, 2020

Note: CMAT- January, 2020* test will be considered for IMT Nagpur and IMT Hyderabad Campus ONLY.

IMT shortlists applicants on basis of best score among the above mentioned tests.

IMT Dubai:

Applicants for the MBA program at IMT Dubai must have a full time undergraduate degree (Bachelor’s degree) from an accredited university with a CGPA of 3.0 and above on a 4.0 scale or 50% or equivalent.

Applicants whose native language is not English are required to take an English Proficiency Test. The minimum required score for TOEFL is 550 (paper-based) and 79(internet based) or an IELTS band of 6.0.

Application fee of Rs. 2000/- plus applicable taxes

How to Apply:

Application Process:

1. Check Application Requirements. Make sure all required documents are ready

2. Fill Online Application Form. There is one Common ‘Application Form’ for all four campuses

3. Make Payment Either through Credit/Debit Card or Net.

Submitting your application

To apply to IMT, an applicant must complete the online ‘Application Form’. There is one Common ‘Application Form’ for all four campuses – IMT Ghaziabad, IMT Nagpur, IMT Hyderabad and IMT Dubai (August 2020 intake).

In the ‘Application Form‘ the candidate must provide educational qualifications, contact details, etc. and at least one of the following: ID for CAT-2019 OR ID for XAT-2020 OR ID for GMAT OR Roll-No for CMAT- January 2020*. IMT Ghaziabad will be accepting CAT OR XAT OR GMAT scores. IMT Nagpur and Hyderabad will be accepting CAT OR XAT OR GMAT OR CMAT scores. The applicant is required to fill the IDs of the entire test score he/she wishes to submit.

Note: CMAT- January, 2020* test will be considered for IMT Nagpur and IMT Hyderabad Campus ONLY.

After completing the form, the applicant can make payment through Credit/Debit card or Net Banking:

Pay directly through Credit/Debit card or Net Banking: If the payment goes through and Application Number is generated, the application is considered submitted. Applicants will receive a confirmation email within the next 24 – 48 hours.

Short-listing of applicants for Personal Interview process (PI): This year, applicants may submit any one of test scores: CAT-2019 OR XAT-2020 OR GMAT (1st January 2016 – February 28, 2020) OR CMAT – January, 2020 (Nagpur & Hyderabad only) score. Applicants can submit more than one test score. GMAT test based candidates are required to update their test score, on or before March 15, 2020. For candidates applying on the basis of GMAT with pending scores, the processing of application will be provisional. IMT will consider the best score before making the final admit offer.

Applicants will be short-listed for Personal Interview round on the basis of one of the following test score available CAT 2019 OR XAT 2020 OR GMAT OR CMAT – January, 2020 (Nagpur & Hyderabad campus) at this stage.

Applicants will be called for Personal Interview process only once. The candidates who have applied on the basis of more than one test score, the best score of such candidates shall be taken into the consideration at the time of Admission Offer. Please note that the Personal Interview process is common for all campuses.

Kindly note:

Short-listed applicants will be called for the Personal Interview round at the center/venue they have selected/will select in Common ‘Application Form‘ and on the date and time which they will select through the Personal Interview Schedule Form, which will be available on IMT’s Admissions Portal and enabled for specific time period in the month of January 2020.

Admissions Decision:

Admission decisions will be made after the Personal Interview process and admission offers will be made to the selected applicants.

New Admit information:

All the selected candidates will be provided information on fees, schedule, accommodation, etc.

Closing Date:

Online Common Application Closes: 22nd November, 2019

Comments:

To know more Information about this courses please visit: www.imt.edu/admissions2020

Indo German Tool Room, IGTR, Aurangabad

Indo German Tool Room, IGTR, Aurangabad
A Govt of India Society under Ministry of S.S.I. Tool Room & Training Centre
P-31, M.I.D.C. Chikalthana Industrial Area
Aurangabad, Maharashtra
Phone-No: 0240 2486832 2482593
Fax: 02402484028
Email: gm@igtr-aur.org Website: www.igtr-aur.org

About College:

The government of India in its endeavor to provide right stimulus for the growth of industry in the country – particularly with a objective of helping MSME’s has established Indo German Tool Room, Aurangabad. A project of Government on India, Government of Federal Republic Of Germany & Government of Maharashtra, Indo German Tool Room (IGTR) an ISO 9001:2000, ISO 14001:2004is a centre which nurtures excellence and provides total tooling & training solutions. IGTR is concentrating on an integrated development of the related segments of the industry by way of providing International Quality Tools, Trained Personnel., Consultancy in Tooling & Related Areas & is constantly crossing new frontiers in quest for excellence & beyond.

Course Name:

Post Graduate Diploma in Tool Design and CAD/CAM {NSQU Level 8}

Post Graduate Diploma in Mechanical Product Design (PGDMPD) [at Aurangabad only] {NSQU Level 8}

Duration: 1 ½ Years

Eligibility:

Degree in Engg. (Mech./Prod.)

Registration fee: 18000/-

Security Deposit: Rs. 5000/-

Course Name:

Post Graduate Diploma in Mechatronics (PGDM) [at Aurangabad only] {NSQU Level 8}

Post Graduate Diploma in VLSI and Embedded Systems [at Aurangabad only] {NSQU Level 8}

Duration: 1 ½ Years

Eligibility:

Degree in Engg. (Elec./ECE/Inst./Mech./Prod.)

Registration fee: 18000/-

Security Deposit: Rs. 5000/-

Course Name:

Post Diploma in Tool Design and CAD/CAM {NSQU Level 6}

Post Diploma in Tool and Die Manufacturing [at Aurangabad only] {NSQU Level 6}

Post Diploma in Product Design [at Aurangabad only] {NSQU Level 6}

Post Diploma in CNC Machine Maintenance [at Aurangabad only] {NSQU Level 6}

Duration: 1 Year

Eligibility:

Diploma in Engg. (Mech./Prod.)

Registration fee: 12000/-

Security Deposit: Rs. 5000/-

Course Name:

Post Diploma in Mechatronics [at Aurangabad only] {NSQU Level 6}

Post Diploma in Industrial Automation and Robotics [at Aurangabad only] {NSQU Level 6}

Duration: 1 Year

Eligibility:

Degree in Engg. (Elec./ECE/Inst./Mech./Prod.)

Registration fee: 12000/-

Security Deposit: Rs. 5000/-

Course Name:

Advance Certificate course in tool Design and CAD/CAM {NSQU Level 5}

Advance Certificate course in tool and Die MFG. [at Aurangabad only] {NSQU Level 5}

Duration: 1 Year

Eligibility:

I.T.I (Draughtsman Mech./Machinist/Turner/Bench Filtter/Tool and Die Maker)

Registration fee: 12000/-

Security Deposit: Rs. 5000/-

How to Apply:

·         Registrations for the above courses are under progress

·         22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.

Contact for Further details:

·         Log on to the website for course details

·         Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org

·         Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in

·         Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.

·         Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org

Closing Date:

Coming Soon…

Commencement of the courses on: 7th October, 2019

Comments:

To know more Information about this courses please visit: www.igtr-aur.org

Indian Institute of Technology, IIT, Madras

Indian Institute of Technology, IIT, Madras
I.I.T Post Office
Madras, Tamil Nadu
Phone-No: 044- 2257 8133
Fax: 044-2257 0509
Email: itc@iitm.ac.in Website: www.iitm.ac.in
Establish: 1959
About College:

Indian Institute of Technology Madras is one among the foremost institutes of national importance in higher technological education, basic and applied research. In 1956, the German Government offered technical assistance for establishing an institute of higher education in engineering in India. The first Indo-German agreement in Bonn, West Germany for the establishment of the Indian Institute of Technology at Madras was signed in 1959.

Course Name:

Executive Master of Business Administration (EMBA)

Eligibility:

WHO CAN APPLY

First Class Bachelor’s degree in any discipline

Minimum three years of work experience at the commencement of class

How to Apply:

Application process: Application should be submitted online.

Application fee: The application fee is Rs. 1500.00

Address for communication

EMBA Program Co-ordinator

Department of Management Studies

Indian Institute of Technology Madras

Chennai 600 036 India

Ph: 044 - 2257 5558 / +91 - 9840572328

Email: emba@iitm.ac.in

Closing Date:

Last date for submission of the online application: 21st October, 2019 at 5.30PM

Comments:

To know more Information about this courses please visit: www.iitm.ac.in

National Power Training Institute, NPTI, Neyveli

National Power Training Institute, NPTI, Neyveli
Ministry of Power, Govt. of India
Southern Region, Block-14
Neyveli, Tamil Nadu - 607803
Phone-No:
04142 269427
Fax: 04142 269427
E-mail: contact@nptineyveli.in Website: www.nptineyveli.in

About College:

National Power Training Institute, Southern Region is one of the 9(Nine) Institutes under National Power Training Institute, a Registered Society functioning with the grant-in-aid from Ministry of Power, Government of India. National Power Training Institute, Southern Region, Neyveli is the very first Power Training Institute in the country. It was started in 1965 as Steam Power Station Personnel Training Institute later renamed as Thermal Power Station Personnel Training Institute under the erstwhile Central Water Power Commission. The objective of setting-up of this Training Institute was to provide a centralized facility for training the engineers of Thermal Power Stations which were coming up in the country during that time. Neyveli was chosen for setting up this Institute as six Thermal units of 300 MW were commissioned and units for another 300MW were under construction at that time at Neyveli as a turn-key project by Russians.

Course Name:

Post-Diploma Course in Power Plant Engineering (PDPPE) 20th Batch

Eligibility:

Should have passed a Diploma in Mechanical /Electrical/ Electrical & Electronics / Electronics & Communication/ Control & Instrumentation/Electronics & Instrumentation Engineering from a recognized Polytechnic/Board.

SELECTION CRITERIA FOR ADMISSION: Merit based on Diploma marks. No age limit. Reservation for SC/ST/OBC/PH is applicable as per Govt. norms.

TOTAL SEATS: 77 (Seventy seven seats). 25% seats for Sponsored candidates. For admissions under sponsored category, candidate has to provide sponsorship letter. Vacant seats in sponsored category shall be filled by non-sponsored candidates. Sponsored candidates will not be considered for campus placement.

PLACEMENT: To provide career opportunities in the Indian Power Sector, NPTI maintains close linkages with Power Utilities and reputed companies for employment of these trained Diploma engineers. Students of previous batches were placed in reputed Power companies. However NPTI does not guarantee placement.

How to Apply:

Applications on plain paper along with SBI Collect Reference or Demand Draft of Rs.700/- including GST towards application fee in favour of National Power Training Institute payable at Neyveli should reach The Director, National Power Training Institute (SR), Block-14, Neyveli 607803 on or before 21.10.2019 with a passport size photograph pasted in the prescribed format containing 1. Name 2. Father’s Name 3. Date of birth & age as on 01.10.2019 4. Gender 5. Marital Status 6. Nationality 7. Whether SC/ST/OBC/PH 8. Postal Address, Mobile/Telephone Number & E-mail ID 9. Educational qualification starting from 10th Standard stating Branch, College/Institution, % of marks, year of passing 10. Experience, 11. Sponsored/Non-sponsored (If sponsored, attach sponsorship letter). 12. Details of DD/SBI Collect 13.Signature with date. Attach attested copies of proof for item No.3, 7, 9, & 10. Application form can also be downloaded from website.

PLEASE NOTE:

1.    Candidates with other discipline (not mentioned in eligibility) need not apply.

2.    Application fee is non-refundable.

3.    Only selected candidates will be informed through E-mail/post. Please refer NPTI (SR) website.

4.    For this admission related queries, please Contact 9442980917/ 9443324051(or) Contact Landline No.  04142-269427 between 10 A.M. & 5 P.M. on working days. For further information Contact,  Smt S. AMIRTHAVALLI, Deputy Director/Training Officer, NPTI(SR), Neyveli, Mob.No.9442980917

Closing Date:

Last Date of receipt of application: 21st October, 2019

Display of admission status in: 25th October, 2019

Date of counseling and admission: 6th November, 2019

Tentative date of commencement of the Course: 25th November, 2019

Comments:

To know more Information about this courses please visit: www.nptineyveli.in

Institute of Nano Science and Technology, INST, Mohali

Institute of Nano Science and Technology, INST, Mohali
(An Autonomous Institute of Department of Science and Technology, GOI)
Habitat Centre, Phase- 10, Sector- 64
Mohali, Punjab – 160062
Phone: 0172-2210075 57 56
Fax: 0172-2211074
Email: contact@inst.ac.in Website: www.inst.ac.in

About College:

Institute of Nano Science and Technology (INST), Mohali (Punjab), an autonomous institution of Department of Science and Technology (DST), Government of India, has been established under the umbrella of NANO MISSION, initiated by DST to boost research and development in the field of Nano science and Nanotechnology in India. INST started its activities on 3rd January 2013, the date on which its first Director was appointed. The institute is currently operating from its transit campus at Habitat Centre, Sector-64, Phase-X, Mohali, Punjab. The new campus of INST would be set up on 35 acers of land in the Knowledge City at Sector-81 (Mohali, Punjab), next to IISER Mohali campus, which is very near to new Chandigarh International Airport. INST, amongst other scientific institutions of Chandigarh and its nearby area is also part of Chandigarh Region Innovation and Knowledge Cluster (CRIKC), an initiative of Punjab Government to foster and sustain close academic alliances between institutions of higher education and research in the Chandigarh region.

Course Name:

Doctor of Philosophy (Ph.D.) [Areas: Nanoscience and Nanotechnology]

Eligibility:
M.Sc. in (Chemistry/ Physics/ Material Sciences/ Life Sciences)/ M.Pharm./ M.Tech. in Basic, Applied Sciences or Engineering and related areas

QUALIFYING EXAMINATION

GATE/ CSIR or UGC-NET/ JEST/ JGEEBILS (TIFR/ NCBS)/ ICMR-JRF/ DBT-JRF/ DST-INSPIRE/ GPAT.

Students registered with IISER Mohali for their BS-MS program can apply as per IISER Mohali’s norm.

How to Apply:

APPLICATION PROCEDURE

1.    The application form for PhD programme can be downloaded from Institute website http://inst.ac.in/careers.php

2.    The duly filled APPLICATION FORM and online SYNOPSIS

(https://docs.google.com/forms/d/e/1FAIpQLSd-LesA-Efu4QDsn0oqa62ev4azldHEICAKwBp0c4CNKBGM6Q/viewform?vc=0&c=0&w=1) should be sent on apply@inst.ac.in as advance copy.

The hard copy of application with the following documents should be sent to “The Director, Institute of Nano Science and Technology, Habitat Centre, Phase - 10, Sector - 64, Mohali, Punjab-160062” so as to reach on or before due date:

(a.) Photograph duly pasted on the application form.

(b.) Application fees

(c.) Self-Attested copies of Certificate in support of age, educational qualifications

(Mark Sheet, Degrees & Certificates of class X and above).

(d.) Experience certificate in case of working candidate.

(e.) Self-attested a copy in support of SC/ ST/ OBC/ PH category (Should be Valid).

3.    The envelope containing the application form should superscribe “Application for the Ph.D. Program – August 2019”.

4.    The shortlisted candidates will be called for interview. The list of the shortlisted candidates will be uploaded on the Institute website and communication will be sent to candidates on email address given by candidate.

5.    The candidates called for interview will be paid sleeper class rail fare or Non-AC Bus Fare (on production of ticket) from place of residence to Institute and back.

6.    The candidates are advised to visit the Institute website. Frequently to know latest developments.

APPLICATION FEES:

The aforesaid application documents should be accompanied by a Demand Draft (DD) of Rs. 450/- for General/OBC or Rs. 150/- for SC/ST/PH drawn in favor of Institute of Nano Science and Technology, Mohali (payable either at Mohali or at Chandigarh). Please mention your name on the reverse of the DD.

Applications from interested students should reach INST through Registered/ Speed Post/Courier by 17th October, 2019. Applications received after this date shall not be entertained in any case.

Award of the Degree: It may please be noted Ph.D. students registered with INST will also have to register at IISER, Mohali for their Ph.D. degree.

Closing Date:

Last Date of Submission of Application is: 17th October, 2019

Comments:

To know more Information about this course please visit: www.inst.ac.in

National Power Training Institute, NPTI, Nangal

National Power Training Institute, NPTI, Nangal
Under Ministry of Power, Govt. of India
Hydro Power Training Centre, Nangal Dam, District: Ropar,
Nangal, Punjab 140124
Phone-No: 01887 - 220573 220391
Fax: 01887 – 221129
Email: hptc_npti@rediffmail.com Website: www.npti.gov.in
About College:

National Power Training Institute (NPTI), an ISO 9001 & ISO 14001 organization, is a National Apex body for Training and Human Resources Development in Power Sector with its Corporate Office at Faridabad. NPTI is continuing its dedicated service for the last four decades. NPTI operates on an all India basis through its Units in different zones of the country located at Faridabad, Neyveli (1965), Durgapur (1968) Badarpur – New Delhi (1974), Nagpur (1975), Centre for Advanced Management and Power Studies (CAMPS) – Faridabad (2000), North-Eastern Regional Institute – Guwahati (2003), Hydro Power Training Institute (HPTI) – Nangal (2006), Power Systems Training Institute (PSTI) – Bangalore (1972) and Hot Line Training Centre (HLTC) also at Bangalore (1974).The Institutes of NPTI are well equipped with Hi-Tech infrastructural facilities for conducting different courses on technical as well as management subjects covering the needs of Thermal, Hydro, Transmission & Distribution Systems, and Energy related fields of the Indian Power and allied Energy sectors.

Course Name:

Post Graduate Diploma in Hydro Power Plant Engineering (PGDHPPE) 11th Batch

Duration: 39 Weeks

Eligibility:

BE/B.Tech or equivalent in Mechanical/ Electrical/ Electrical & Electronics/ Power Engineering from a recognized College/University for both Non- sponsored & sponsored candidates. Candidates under sponsored category have to provide sponsorship letter from its employer/sponsoring authority.

AGE LIMIT No age limit.

SELECTION PROCEDURE Merit basis (% of marks of qualifying Degree).

TOTAL SEATS 60 (Sixty). Reservation for EWS/SC/ST/OBC/PWD etc is applicable as per Govt. of India norms. 25% seats are reserved for candidates sponsored from the power utilities. Total No of seats may vary as per requirements. Vacant seats in sponsored category may be filled by non-sponsored category & vice-versa if required.

PLACEMENT This course is job oriented professional course and NPTI maintains close linkages with the Hydro Power utilities & reputed hydro power companies for the placement. Last year about 95% PGDC Hydro students, batch 2018-19 placed in reputed companies. However institute doesn’t claim the guarantee of placement.

How to Apply:

Prescribed application as per format (i.e. Annexure A, B & C) filled with relevant details along with application fee of Rs. 1000/- including GST (Non-refundable) to be paid by online mode as per detail given below or Demand Draft of in favour of “HPTC, NPTI, Nangal” payable at Naya Nangal (SBI, Branch code-0689), Punjab should reach to Principal Director, National Power Training Institute (HPTC), Nangal, Distt. Ropar-140124 (Punjab) latest by 27th Sept 2019 up to 05.00 PM. Envelope containing the application form and other documents should be superscribed “Application for PGDC (Hydro) – 2019-20”.

BANK DETAILS

Name of Beneficiary HPTC, NPTI, Nangal

Name of Bank SBI, Naya Nangal

Account No 30476401576

IFSC SBIN0000689

Closing Date:

Last date of Receipt of application: 27th September, 2019

Final merit list will be displayed at institute websites on: 4th October, 2019

Counselling for admission of candidates (all categories): 17th & 18th October, 2019

Commencement of Course: 21st October, 2019

Comments:

To know more Information about this courses please visit: www.npti.gov.in/npti_nangal

Management Development Institute, MDI, Gurgaon

Management Development Institute, MDI, Gurgaon
Mehrauli Road Sukhrali, Gurgaon, Haryana
Phone: 0124 4560000
Fax: 0124 4560456
Email: admissions@mdi.ac.in Website: www.mdi.ac.in

About College:

MDI is one of the top B-Schools of the country. The institute integrates knowledge, research, industry experience and international exposure to offer comprehensive management programmes. MDI has the distinction of being the first internationally accredited Indian B-School. It was accredited by South Asian Quality Systems (SAQS) in 2005. The long term Education Programmes are accredited by Association of MBAs (AMBA), U.K. The PG Programmes in Management offered by MDI are recognized and accredited by the All India Council for Technical Education (AICTE) New Delhi. Its PGPM has been awarded “A” Grade by the ‘National Board of Accreditation’ of All India Council for Technical Education. Various surveys have consistently ranked MDI amongst the top B-Schools of the country.

Course Name:

Post Graduate Programme in Management (PGPM)

Post Graduate Programme in Human Resource Management (PGPHRM)

Post Graduate Programme in International Management (PGPIM)

Eligibility:

Eligibility for PGPM & PGPHRM

·         The candidates must have 50% marks or equivalent CGPA in both X and XII.

·         The candidate must have minimum 3 year’s Bachelor’s Degree, with at least 50% marks or equivalent CGPA in any discipline from any University incorporated by an Act of the Central or State legislature in India or other educational institutions established by an Act of Parliament or declared to be deemed as a University under Section 3 of UGC Act, 1956, or possess an equivalent qualification recognized by the Ministry of HRD, Government of India. The Bachelor’s Degree or equivalent qualification obtained by the candidate must entail a minimum of three years of education after completing higher secondary schooling (10+2) or equivalent. Candidates appearing for the final examination for the Bachelor’s degree (or equivalent examination) and completing all requirements for obtaining the Bachelor’s degree by 30th June, 2020 can also apply, subject to furnishing evidence to that effect latest by 1st October, 2020; otherwise they may be asked to withdraw from the programme.

Selection Process

Candidates who have appeared for the CAT (2019) will be short listed on the basis of the details filled in the application form and their CAT scores. Only the shortlisted candidates will then be called for Group Discussion and Personal Interviews during February and March 2020 at one of the centres, viz. Bangalore, Gurgaon, Kolkata, Hyderabad, Chennai and Mumbai (centres other than Gurgaon are tentative).

Eligibility for PGPIM

·         For PGP-IM, on successful completion of the programme requirements, student will be awarded a Post Graduate Diploma in Management (PGP-IM) from MDI Gurgaon and MIM (Masters in Management) from ESCP Europe. It is a twinning programme approved by AICTE/AIU.

·         Candidates must have 50% marks or equivalent CGPA in both X and XII along with Bachelors (4 years minimum) with at least 50% marks or equivalent CGPA in any discipline from any University incorporated by an Act of the Central or State legislature in India or other educational institutions established by an Act of Parliament or declared to be deemed as a University under Section 3 of UGC Act, 1956, or possess an equivalent qualification recognized by the Ministry of HRD, Government of India and a minimum of 1 year (one-year) of work experience post-qualification (4-year's Bachelor's degree) as on 31st December 2019.

The basis for computing the percentage obtained by the candidate would be based on the practice followed by the university/institution/board from where the candidate has obtained the degree/certificate. In case of the candidates being awarded grades/CGPA instead of marks, the equivalence would be based on the equivalence certified by the university/ institution/board from where they have obtained bachelor’s degree/certificate. In case the university/institution/board does not have any scheme for converting CGPA into equivalent marks, the equivalence would be established by MDI by dividing obtained CGPA with the maximum possible CGPA and multiplying fraction so obtained by 100.

Selection Process

Candidates who have appeared for the CAT (2019) will be short listed on the basis of the details filled in the application form and their CAT scores. Only the shortlisted candidates will then be called for Group Discussion and Personal Interviews during February and March 2020 at one of the centres, viz. Bangalore, Gurgaon, Kolkata, Hyderabad, Chennai and Mumbai (centres other than Gurgaon are tentative).

How to Apply:

Online Application:

Applicants have to apply online by visiting MDI website. They can click on the programme they wish to apply for and follow the instructions given on the website. Online registration will be Open till Friday, November 22, 2019, 17:00 hrs. Candidates have to make an online payment of Rs 3000/-(Incl. of 18% GST) using Credit/Debit card/Net Banking.

NOTE: Applicants have to fill single application form. The preferences of PGPM/PGP-HRM/PGP-IM will be taken only from the shortlisted candidates in the month of January/ February 2020. The shortlisted candidates have to login at MDI website and enter their order of preference for PGPM/PGP-HRM/PGP-IM based on the eligibility criteria for all programmes. Preferences once filled will not be changed at any stage later on.

Closing Date:

Last Date for submission of online Application: 22nd November, 2019. 17:00

CAT Test date: 24th November, 2019 (Sunday)

Comments:

To know more Information about this courses please visit: www.mdi.ac.in

Indian Institute of Technology, IIT, Kanpur

Indian Institute of Technology, IIT, Kanpur
Kalyanpur, Kanpur, Uttar Pradesh
Phone-No: 0512 – 2597389
Email: kga@iitk.ac.in Website: www.iitk.ac.in
About College:

Indian Institute of Technology, Kanpur is one of the premier institutions established by the Government of India. The aim of the Institute is to provide meaningful education, to conduct original research of the highest standard and to provide leadership in technological innovation for the industrial growth of the country. The Institute began functioning in the borrowed building of Harcourt Butler Technological Institute in 1959 with 100 students and a small faculty. The Institute now has its own sprawling residential campus, about 2255 undergraduate and 1476 postgraduate students, 309 faculty and more than 900 supporting staff. The combined record of its past and present faculty and students along with the alumni spread across the world is awe-inspiring. With the path-breaking innovations in both its curriculum and research, the Institute is rapidly gaining a legendary reputation.

Course Name:

Post Graduate Program for Executives for Visionary Leadership in Manufacturing (PGPEVLM) 14th Batch [Course offered by: IIMC, IITK and IITM]

Eligibility:

Graduate engineers with first division/First Class marks from class X onwards with minimum 4.5 years to maximum 10 years work experience (for self-sponsored candidates) or minimum 4.5 years work experience (for sponsored candidates with study leave) in manufacturing, engineering and related sectors. for further details and online application, visit www.iitk.ac.in/ime/vlm/

How to Apply:

Last date of Submission of duly filled and signed online application along with Application fee of INR 3500/- through DD in favour of "Indian Institute of Technology, Kanpur" is Monday, November 04, 2019. Aptitude test will be held on sunday, December 01, 2019 at four cities, namely Kolkata, Mumbai, delhi and chennai. Shortlisted candidates will be called for personal interview (PI) to be held on sunday, December 22, 2019 at IIT Kanpur. Selection will be based on academic records, work experience, and performance in the PI.

For further queries, Call +91 512 2596590/ 2596562 or email to: vlmp@iitk.ac.in

Closing Date:

Last date of Submission of duly filled and signed online application along with Application fee: 04th November, 2019

Comments:

To know more Information about this courses please visit: www.iitk.ac.in