ADMISSION NEWS

Portal for Indian Education and Admission Updates

NAVIGATION - SEARCH

Indian Institute of Technology, IIT, Delhi

Indian Institute of Technology, IIT, Delhi
Department of Management Studies
Vishwakarma Bhawan, Shaheed jeet singh Marg
New Delhi-110016
Phone-No: 011 26597034 26591171
E-mail: inquiry@dmsiitd.org Website: www.iitd.ac.in

About College:

Indian Institute of Technology Delhi is one of the seven Institutes of technology created as centers excellence for higher training, research and development in science, engineering and technology in India, the others being at Kanpur, Kharagpur, Madras, Bombay, Guwahati and Roorkee. Established as College Engineering in 1961, the Institute was later declared an Institution of National Importance under the "Institutes of Technology (Amendment) Act, 1963" and was renamed "Indian Institute of Technology Delhi ". It was then accorded the status of a deemed university with powers to decide its own academic policy, to conduct its own examinations, and to award its own degrees.

Course Name:

Doctor of Philosophy (PhD)

Eligibility:

(a) Minimum Qualifications for admission to Full-time Ph. D. Programmes:

Table 1 defines the minimum qualifications required for admission to full-time Ph. D. programmes at IIT Delhi. Please note:

·         These are Institute minimum requirements and any Department/Centre/School operating through their DRC/CRC/SRC can specify higher short-listing criteria than what is specified here.

·         This table includes most of the degrees, but each DRC/CRC/SRC is free to specify the qualifications and disciplines acceptable for admission to their programmes.

·         Candidates in the final year of their programmes and who expect to complete all their qualifying degree requirements before the date of registration are also eligible to apply for admissions. For short-listing purposes, their performance until the preceding semester (preceding year if their programmes are year based) would be considered but their admission would be provisional, subject to their meeting the minimum eligibility criteria after their final qualifying examination results are announced. In any case, all admissions are provisional at first and it is confirmed only after all certificates and previous records are duly checked and verified, a process which may take a few weeks into the starting semester.

Minimum Qualification for Admission to full-time Ph.D. Programmes*

Qualifying Degree

Minimum performance in Qualifying degree for General/OBC (Non-Creamy Layer)/EWS category students

Qualification through national level examination requirements

M. Tech./M.E./M.D. / or equivalent

60% marks or 6.00 CGPA on a 10-point scale

Nil

M.Sc./MBA/M.A./ M.B.B.S. or equivalent

60% marks or 6.00 CGPA on a 10-point scale

Qualified GATE/ CSIR/UGC NET/ICAR/ICMR/DSTINSPIRE fellowship

B.E. /B. Tech. or equivalent

70% marks or 7.00 CGPA on a 10-point scale

Qualified GATE/CSIR/UGC NET/ICAR/DST INSPIRE Fellowship

Exemptions, relaxations and clarifications:

1.    For SC/ST/PH category students, minimum performance in the qualifying degree with postgraduate qualifications (first two rows in Table 1) is relaxed from 60% to 55% (CGPA relaxed from 6.00 to 5.50).

2.    Qualifying degree performance is computed by aggregating performance over all the semesters/years of the qualifying degree, as per the credit or weightage system approved in the institution / board where the degree has been completed.

3.    Requirement of qualification in GATE / National Exam is waived for the following categories of applicants:

(i) Currently registered students in Centrally Funded Technical Institutes (CFTIs) pursuing B. Tech./B.E./ Integrated M. Tech/ Integrated M. Sc. programmes, who have completed 6 semesters or more, and have CGPA of 8.000 or above (on a 10 point scale). Such students must obtain a CGPA of 8.000 or above at the time of graduation, and before they formally register for the Ph.D. programme (80% aggregate marks, if marks is the primary mode of evaluation);

(ii) Graduates of CFTIs (in the programmes marked under (i)) with a final graduation CGPA of more than 8.000 (80% aggregate marks, if marks is the primary mode of evaluation);

(iii) M.A or M.Sc. graduates from IITs with CGPA 8.000 or above.

4.    For purposes of shortlisting, the primary method of evaluation (i.e., CGPA/CPI, or aggregate percentage, as appropriate) followed by the institution where candidate has obtained his/her qualifying degree will be used by IIT Delhi for determining whether the candidate meets the final shortlisting requirements.

5.    For assistantship purposes only (and not for qualification), candidates with M.B.B.S. qualification will be considered equivalent to M. Tech., for admission to Ph.D. programme in Centre for Biomedical Engineering;

6.    For candidates with M.A. degree in English, a 5% relaxation in marks or 0.5 relaxation in CGPA may be permitted for admission to the Ph.D. programme in Humanities and Social Sciences;

7.    Candidates holding an MBA degree are eligible for applying to the Ph.D. programme in the Department of Management Studies.

(b) Minimum Qualifications for admission to Part-time and Sponsored (full-time) Ph.D. Programmes:

The following eligibility conditions apply for the Part-time and sponsored full-time programmes:

1.    Only employees of Public Sector Undertakings or Government Departments or Research and Development Organizations or Private Industries (approved by Faculty Boards) are eligible for admission to these programmes.

2.    The minimum full-time experience required after obtaining the qualifying degree and as on date of registration, is given below in Table 2:

Table 2: Experience required for admission to part-time Ph.D./ M.Tech./ M.S. (Research) Programmes

For admission to part-time programme

Qualifications

Work Experience (Post Qualification)

Ph.D.

M.E./M.Tech./M.S.(R)/M.D.or Equivalent

Nil

Ph.D.

B.E./B.Tech./M.Sc./M.A./M.B.A./MBBS or equivalent, from CFTIs/Central Universities

1 Year

Ph.D.

B.E./B.Tech./M.Sc./M.A./M.B.A./MBBS or equivalent, and working in IIT Delhi* (Project or Regular) *Through proper channel

1 Year

Ph.D.

B.E./B.Tech./M.Sc./M.A./MBA/MBBS or equivalent, from institutions other than CFTIs/Central Universities

2 Years

M. Tech./ MS(R)

B.E./B.Tech./M.Sc or equivalent, from CFTIs/Central Universities

6 Months

M. Tech./ MS(R)

B.E./B.Tech./M.Sc or equivalent, and working in IIT Delhi* (Project or Regular) * Through proper channel

6 Months

M. Tech./ MS(R)

B.E./B. Tech./M.Sc. or equivalent, from institutions other than CFTIs/ Central Universities)

1 Year

3.    Minimum qualification for these candidates is the same as for full-time candidates (Table 1), except that the requirement of qualifying in a national examination (column 3 in Table 1) is waived.

4.    For part-time candidates from outside NCR (or at a radial distance of more than 50 km from IIT Delhi), there is a minimum residency requirement of 6 months. DRC/ CRC/SRC may specify a higher residency requirement based on the courses recommended as well as the background.

5.    Sponsored (full-time) candidates seeking admission to a Ph.D. programme on the basis of study leave, must submit a “Sponsorship Certificate” on a proper letterhead from the appropriate authority in the organization clearly stating the following:

·         for the period of his/her studies in the programme, the candidate would be treated as on duty with usual salary and allowances; and

·         that he/she will be fully relieved and granted study leave for a minimum period of 3 years (2 years for M. Tech. and equivalent degree holders).

6.    Part-time candidates are required to submit a “No Objection Certificate” (NOC) on a proper letterhead from the appropriate authority in the organization clearly stating the following:

·         the candidate is permitted to pursue studies on a part-time basis;

·         he/she will be fully relieved from duty and permitted to reside at the Institute for the period of required residency that is essential for completing the course work (this is not a requirement for candidates who are working in NCR or organizations located within a distance of 50 km from the Institute);

·         that his/her official duties permit him/her to attend required classes as per the Time Table of IIT Delhi;

·         that his/her official duties permit him/her to devote sufficient time for research;

·         facilities for research in the candidate’s field of research are available at the candidate’s place of work, in case the proposed Ph. D. research plan requires him/her to use these facilities when the candidate is physically present at this place of work.

Template of this NOC is available on the IIT Delhi PG admissions website. Kindly note that lack of confirmation and clarity on one or more of the above points in the NOC may make prevent the applicant’s application being processed, even if he/she qualify in the interview/screening.

Course Name:

M. Tech./ M.S. (Research)/ M.Des

Eligibility:

Minimum qualifications and procedure for admission to Full-time M. Tech./ M.S. (Research)/ M. Des. Programmes:

Table 3 lists the minimum qualifications required for admission to full-time M. Tech./ M.S.(R)/ M. Des. programmes at IIT Delhi. In this context, please note:

·         These are Institute minimum requirements and any Department/Centre/School operating through their DRC/CRC/SRC/PEC can specify higher short-listing criteria than what is specified here. • This table includes many degrees for eligibility, but each DRC/CRC/SRC/PEC is free to specify the qualifying degree disciplines as well as GATE disciplines acceptable for admission to their programmes.

·         Admission to M. Tech./M. S.(R)/M. Des. programmes are carried out by first short-listing the eligible candidates (meeting the minimum performance in their qualifying degree - Column 3 of Table 2), and scoring above a GATE / CEED cut off specified for that programme and then conducting written test / interview at IIT Delhi. GATE / CEED cut offs for various Programmes last year are tabulated in Annexure IV. In such cases, GATE score is given a minimum weight of 70% in judging the overall performance of the candidates appearing for the interview.

·         DRC/CRC/SRC/PEC is empowered to offer direct admission for M. Tech./M.S.(R) programmes without interview to exceptionally meritorious students. The minimum performance required by such candidates is also listed in Table 3. This is the Institute minimum, and the DRC/CRC/SRC/PEC is free to set higher eligibility criteria for direct admissions without an interview. DRC/CRC/SRC/PEC may also decide not to offer any direct admissions without interviews.

·         Candidates in the final year of their programmes and who expect to complete all their qualifying degree requirements before the third week of July 2019, are eligible to apply for admission. For short- listing purposes, their performance till the preceding semester (preceding year if their programmes are year based) would be considered, but their admission would be provisional, subject to their meeting the minimum eligibility criteria after their final qualifying examination results are announced.

Table 3: Minimum Qualification for Admission to full-time M.Tech./M.S. (Research)/M.Des. Programmes

Programme & Admission type

Qualifying Degree

Minimum performance in the qualifying degree for General/ OBC (Non-Creamy Layer) category students

National level examination Requirements

M. Tech./ M. Tech.(High Value Assistantship)/ M.S.(R) (Direct Admission without test/interview)

B.E./B. Tech./ M.Sc. or equivalent

75% marks or 7.50 CGPA on a 10-point scale

Qualifying GATE score

M. Tech./ M. Tech.(High Value Assistantship)/ M.S.(R) (Admission with test/interview)

B.E./B. Tech./ M.Sc. or equivalent

60% marks or 6.00 CGPA on a 10- point scale

Qualifying GATE score

M. Des. (Direct Admission without test/interview)

B.E./B. Tech./ B. Arch. or equivalent

75% marks or 7.50 CGPA on a 10-point scale

Valid CEED Score

M. Des. (Admission with test/interview)

B.E./B. Tech./B. Arch. or equivalent

60% marks or 6.00 CGPA on a 10- point scale

Valid CEED Score

Exemptions, relaxations and clarifications:

1.    For Direct admission of SC/ST/PH category students (row 2 & 4 of Table 3), minimum performance in the qualifying degree is relaxed from 75% to 70% (7.50 to 7.00).

2.    For admission with interview of SC/ST/PH category students (row 3 & 5 of Table 3), minimum performance in the qualifying degree is relaxed from 60% to 55% (6.00 to 5.50).

3.    Qualifying degree performance is computed by aggregating performance over all the semesters/years of the qualifying degree.

4.    For all B.Tech. from IITs graduating with a CGPA of 8.0 or above, the requirement of qualification through GATE is waived off.

5.    Candidates with AMIE or Grad. IETE qualifications may also be considered for admission to the M. Tech. Programmes; however, if provisionally selected for admission based on their AMIE/Grad IETE performance, they would be required to complete 24 valid undergraduate credits prescribed by the concerned DRC/CRC/ SRC/PEC and clear the GATE examination before being actually admitted to the M. Tech./ M.S.(R)/M. Des. Programmes.

6.    The offer of admission to M.Tech. Programme will have to be accepted on the Common Offer Acceptance Portal (COAP). Detailed instructions in this regard will be provided on the IIT Delhi website.

Minimum Qualifications for admission to Part-time and Sponsored (full-time) M. Tech. /M.S.(Research) Programmes:

The following additional eligibility conditions and relaxations apply for the Part-time and sponsored fulltime programmes.

1.    Only employees of Public Sector Undertakings or Government Departments or Research and Development Organizations or Private Industries (approved by Faculty Boards) are eligible for admission to these programmes.

2.    Employees of only those organizations which are located within 50 Kilometers radius of IIT Delhi are eligible to be considered for admission to part-time M.Tech./ M.S.(R) programmes

3.    The minimum experience (Full Time) required after qualifying degree and as on date of registration is as given in Table 2 above

4.    Minimum qualification for these candidates is the same as for full-time candidates except that the requirement of qualifying in a national examination (column 4 in Table 3) is waived off.

5.    Sponsored (full-time) candidates seeking admission to a M.Tech./M.S.(R)/M.Des. programme on the basis of study leave, must submit a “Sponsorship certificate” on a proper letterhead from the appropriate authority in the organization clearly stating the following:

a. for the period of his/her studies in the programme, the candidate would be treated as on duty with usual salary and allowances, and

b. that he/she will be fully relieved and granted study leave for a minimum period of 2 years

6.    Part-time candidates are required to submit a “No Objection Certificate” on a proper letterhead from the appropriate authority in the organization clearly stating the following:

- the candidate is permitted to pursue studies on a part-time basis

- that his/her official duties permit him/her to devote sufficient time for studies

- that he/she will not be transferred to any other place during the period of study

How to Apply:

APPLICATION PROCEDURE

Submission of Application is only through online procedure. Candidates are NOT required to send hard copy of the application form and bank challan. Online submission of the application form may be made by accessing the Institute website <http://www.iitd.ac.in/pgadmission>. Candidates belonging to General/OBC category are required to pay for each application form a fee of Rs. 200/- and the candidates belonging to SC/ST/PH categories are required to pay Rs. 50/-. The bank charges will be borne by the candidate.

REFUND OF FEES

The whole amount of fees/other charges deposited by the students will be refundable after deduction of Rs.1,000/- if the candidates do not join the programme after paying the dues and leave the Institute by applying for refund on or before the date of registration. On resignation after registration, only security deposit will be refunded.

For refund of fees and/or security deposit the student must apply on the prescribed form available from the P.G. Section, IIT Delhi or the Institute Website.

For any query/clarification, please contact P.G. Section at the following telephone Nos.: Tel: 011-26591780, 011-26591743

Closing Date:

Last date for submission of online application and application fee: 30th March, 2019 (04.00 pm)

Range of dates for Test / Interview: 07th May, 2019 - 31st May, 2019

Date of Orientation and Registration for new students: 19th -20th July, 2019

Commencement of classes: 22nd July, 2019

Comments:

To know more Information about this courses please visit: www.iitd.ac.in

Indian Institute of Science, IISc, Bangalore

Indian Institute of Science, IISc, Bangalore
Bangalore
Bangalore, Karnataka
Phone-No: 080-22932210 080-22932977 080-23601413
Fax: 080-23601413
Email: registrar@iisc.ac.in Website: www.iisc.ac.in
Establish: 1948

About College:

The Indian Institute of Science (IISc) was conceived as a ´Research Institute´ or ´University of Research´ by Jamsetji Nusserwanji Tata, in the final years of the 19th century. A long period of almost thirteen years was to elapse from the initial conception in 1896 to the birth of the institute on May 27, 1909. The early history of the Institute is a fascinating chapter in the story of higher education and scientific research in India. The cast of characters in the drama that led to the establishment of the Institute includes, in addition to its charismatic and generous founder J.N. Tata, figures from the pages of Indian history.

Course Name:

PhD Research in Science [Faculty: Astronomy & Astrophysics, Biochemistry, Ecological Sciences, High Energy Physics, Inorganic & Physical Chemistry, Materials Research, Mathematics, Microbiology & Cell Biology, Molecular Biophysics, Molecular Reproduction, Development & Genetics, Neurosciences, Organic Chemistry, Physics, and Solid State & Structural Chemistry]

MTech (Research) and Ph D in Engineering [Faculty: Aerospace Engineering, Atmospheric & Oceanic Sciences, Chemical Engineering, Civil Engineering, Computer Science & Automation, Earth Sciences, Electrical Communication Engineering, Electrical Engineering, Electronic Systems Engineering, Instrumentation, Management Studies (PhD only), Materials Engineering, Mechanical Engineering, Nano Science and Engineering (PhD only), Design & Manufacturing, Sustainable Technologies, and Computational & Data Sciences]

PhD Research in Interdisciplinary [areas: Bio Systems Science and Engineering (offered by Centre for Biosystems Science and Engineering), Energy (offered by Interdisciplinary Centre for Energy Research), Mathematical Sciences (offered by National Mathematics Initiative), Nanoscience and Engineering (offered by the Centre for Nano Science and Engineering), Water Research (offered by Interdisciplinary Centre for Water Research), Cyber Physical Systems (offered by Robert Bosch Centre for Physical Systems), Climate Change (offered by Divecha Centre for Climate Change)]

Eligibility:

Applicants possessing a minimum of second class or equivalent in the following degrees as applicable to the individual departments / areas are eligible to apply:

S.No.

Qualifying degree

Qualifying in national entrance tests (Mode of Entry)

1

Bachelor’s degree in Engineering/Technology/ 4-year Bachelor of Science.

Valid GATE score* or NET JRF** is mandatory

2

Master’s degree in Science / Master’s degree in Economics, Geography, Psychology, Management, Commerce, Operations Research, Computer Science/ Application

Valid GATE score or NET JRF is mandatory

3

Master’s degree in Engineering/ Technology/ Architecture/ Agriculture/ Pharmacy/ Veterinary Science

Desirable to have valid GATE score or NET JRF/GPAT.

4

MS/MBA (post BE/B.Tech/MSc) – (applicable for the department of Management Studies/Ecological Sciences)

Desirable to have valid GATE score or NET JRF.

5

Bachelor’s degree or its equivalent in Engineering/ Technology from any centrally funded technical institutions, with a minimum CGPA of 8.5 out of 10 or its equivalent. (for PhD Only)

Desirable to have valid GATE score or NET JRF.

6

MBBS/MD

Desirable to have valid GATE score or NET JRF.

7

BPharma

Valid GPAT Score/JRF

8

Bachelor’s degree holders in Physics / Chemistry / Mathematics /Statistics / Computer Science /Electronics followed by qualifications obtained through examinations conducted by professional societies recognised by UPSC/AICTE as being equivalent to a Bachelor’s degree in Engineering.

Valid GATE score / NET JRF is mandatory

*The GATE score should be valid as on August 1, 2019. Candidates securing the valid GATE score for the years 2017/2018/2019 may apply.

** NET JRF includes - CSIR-UGC NET for JRF; UGC-NET for JRF; DBT JRF; ICMR JRF; JEST; NBHM Screening Test 2019; INSPIRE.

Selection procedure: Candidates are shortlisted for an interview based on their performance in the National Entrance Test or the qualifying degree as detailed in the above table. The selection is based on the performance in the interview (in some of the departments, a written test will precede the interview).

Course Name:

MTech [Specialization: Aerospace Engineering, Civil Engineering, Computer Science and Engineering, Instrumentation & Applied Physics, Materials Engineering, Transportation & Infrastructure Engineering (Selection procedure: Based only on the GATE score)]

MTech [Specialization: Artificial Intelligence, Chemical Engineering, Climate Science, Computational & Data Sciences, Earth Science, Electronic Systems Engineering, Electrical Engineering, Mechanical Engineering, Microelectronics and VLSI Design (Selection procedure: Based on the GATE score and the performance in an aptitude test/interview)]

MTech [Specialization: Communication and Networks, Nano Science and Engineering, Signal Processing, Smart Manufacturing (Selection procedure: Based on the GATE score and the performance in an interview)]

Eligibility:

Applicants possessing a minimum of Second Class or equivalent in a Bachelor's degree in an appropriate field of Engineering / Technology or Master’s degree in Physical Sciences, Mathematics, Statistics, Geology, Instrumentation, Electronics, Computer Applications as applicable to individual departments / programmes with a valid GATE 2017 / 2018 / 2019 score are eligible to apply.

M Tech programmes interview schedules are as given on the IISc website www.iisc.ac.in/admissions under Important Dates.

Common Offer Acceptance Portal (COAP) provides a common platform for the candidate to make the most preferred choice for an admission into M.Tech Programmes through GATE in participating institutions (IISc & IITs). Admission offers for M Tech programmes of IISc for all the above disciplines and also for M.Des. (from GATE stream) will be made on COAP. Candidates will have to register on COAP to accept the offer. Please visit the website http://coap.iitm.ac.in/ register as per the instructions given therein.

Sponsored candidates from Defence, DRDO, BARC, ISRO, NAL, NTRO, KSRTC, BMTC, BDA, PWD and CPRI applying for a course programme under the sponsored category must compulsorily fill an online application form and submit the printed version, in duplicate, on or before 27 March 2019.

Course Name:

Master of Design (M Des) in Product Design and Engineering offered by Centre for Product Design and Manufacturing

Eligibility:

Applicants possessing a minimum of second class in Bachelor’s degree in Engineering / Technology Design / Architecture with valid GATE 2017/ 2018/ 2019 or CEED 2019 score are eligible to apply.

Selection procedure: Candidates will be shortlisted for a design aptitude test and an interview based on the GATE / CEED score as per the schedule given on the IISc website under Important Dates. Selection will be based on the performance in the design aptitude test and interview. The announcement of the results and issue of admission of offers for candidates shortlisted on GATE score will be through COAP, and for those based on CEED, directly by the Institute. Therefore, the candidates with GATE are required to register on COAP as detailed at given below

Common Offer Acceptance Portal (COAP) provides a common platform for the candidate to make the most preferred choice for an admission into M.Tech Programmes through GATE in participating institutions (IISc & IITs). Admission offers for M Tech programmes of IISc for all the above disciplines and also for M.Des. (from GATE stream) will be made on COAP. Candidates will have to register on COAP to accept the offer. Please visit the website http://coap.iitm.ac.in/ register as per the instructions given therein.

Course Name:

Master of Management (M Mgt)

Eligibility:

Applicants possessing a minimum of first class or equivalent in Bachelor’s degree in Engineering /Technology or equivalent with a valid GATE 2017/ 2018/ 2019 or CAT 2018 or GMAT scores are eligible to apply.

Selection procedure:

Candidates will be short-listed for a group discussion and interview based on GATE / CAT / GMAT scores as per the schedule given on the IISc website under Important Dates. Selection will be based on the performance in the group discussion and interview.

Course Name:

Integrated PhD [Disciplines: Biological Sciences, Chemical Sciences, Mathematical Sciences, Physical Sciences]:

Eligibility:

Biological Sciences:

Educational qualification: A minimum of first class or equivalent in Bachelor’s or an equivalent degree in Physical, Chemical or Biological Sciences (including Biotechnology, Pharmaceutical, Veterinary Sciences and Agricultural Sciences) or A minimum of first class or equivalent in BE/ B Tech degree.

Qualifying examination: JAM 2019 in Biological Sciences (BL) or Biotechnology(BT) or Chemistry (CY) or Mathematics (MA) or Physics (PH) Biotechnology (BT)

Chemical Sciences:

Educational qualification: A minimum of first class in B.Sc. or an equivalent degree with Chemistry as one of the main subjects with Mathematics at the PUC or Plus 2 level.

Qualifying examination: JAM 2019 in Chemistry (CY) or Biological Sciences (BL) or Physics (PH)

Mathematical Sciences:

Educational qualification: A minimum of first class or equivalent in B Sc or equivalent degree with Mathematics as one of the subjects or BE/BTech or equivalent degree. A minimum of first class or equivalent in BE/ B Tech degree.

Qualifying examination: JAM 2019 in Mathematics (MA) or Mathematical Statistics (MS)

Physical Sciences:

Educational qualification: A minimum of first class or equivalent in B.Sc. or an equivalent degree with Physics as one of the main subjects.

Qualifying examination: JAM 2019 in Physics (PH) or JEST 2019

Selection procedure: Candidates will be short listed for interview based on their JAM 2019 score for all the four disciplines and also JEST 2019 for Physical Sciences. Selection for (a) Chemical Sciences will be based on the performance in the Interview; (b) Biological, Physical and Mathematical Sciences will be based on combined performance in the qualifying examination and interview.

Course Name:

Research Ph D under External Registration Programme (ERP) [This programme is meant for (1) professionals from R&D Organizations / Industries and (2) Faculty members from Engineering, Agricultural, Pharmaceutical, Veterinary, Medical Colleges/ Universities, recognized by the appropriate government agencies]

Eligibility:

The educational qualifications remain the same as for the regular candidates. Qualifying in one of the national entrance tests like CSIR-UGC NET for JRF, UGC-NET for JRF, DBT JRF, ICMR JRF, GATE, NBHM is desirable but not mandatory. Further, the candidate should have completed two years of full-time employment in the current organization. The candidates must be officially sponsored by their employing organizations.

Selection procedure: Based on the performance in an interview

How to Apply

Applications for all the programmes mentioned above are available online. Hence the applicants should apply online only. Visit IISc website Admissions for more details and register online and fill the application.

APPLICATION FEE

Category

·         General / OBC: Rs. 800/-

·         SC / ST / PwD (person with disability): Rs.400

·         ERP candidates (all categories): Rs.2000

·         Sponsored candidates from Defence, DRDO, BARC, ISRO, NAL,NTRO, KSRTC, BMTC, BDA PWD and CPRI: Rs.800

*The fee is non-refundable; any bank or payment gateway service charges must be borne by the applicant.

Payment options: Online payment through net-banking, debit card, visa/master credit card.

Reservation / concession / relaxations for OBC/SC/ST/Persons with disability (PwD) and Kashmiri-Migrant (KM) candidates: As per the Government of India rules. The minimum class prescribed in the qualifying examination is relaxed to a “Pass Class” for SC/ST candidates.

Scholarships: All the regular students (except M.Mgt) who join the Institute are eligible for scholarship from MHRD / CSIR / UGC/ ICMR / DBT / AICTE / DAE (NBHM) depending upon their mode of entry. Scholarships from many Indian and multinational agencies, and business houses are also available for meritorious students.

The applicants are advised to visit the website www.iisc.ac.in/admissions and the department website to which they are applying to familiarize themselves with complete admission related matters, areas of research, etc.

Closing Date:

Website opens for on-line submission of applications: 1st February, 2019

Last date for online submission of applications: 25th March, 2019 at 23:59 hours

Comments:

To know more Information about this Course please visit: www.iisc.ac.in

Jamia Millia Islamia Admission for BTech and BArch 2019-20 through JEE Main 2019

About Exam:

 

JAMIA MILLIA ISLAMIA
A Central University by an Act of Parliament
NAAC Accredited Grade “A”
Website: www.jmi.ac.in, www.jmicoe.in

Admission Through JEE Main 2019 Rank Admission to B.Tech. & B.Arch. programs of Jamia Millia Islamia for the session 2019-20 will be based on the Final Rank of JEE Main-2019 Examination conducted by National Test Agency (NTA). Candidate appeared in either or both the JEE Main 2019 exam may apply.

Important: Candidates interested in applying for admission to JMI’s B.Tech. or B.Arch. programs are required to:

A) Apply for JEE Main examination 2019 on JEE MAIN portal link: (https://jeemain.nic.in/webinfo/Public/Home.aspx)

1) Candidates seeking admission to JMI’s B.Tech. programs must appear in JEE Main- 2019 Paper-1 examination.

2) Candidates seeking admission to JMI’s B.Arch. programs must appear in JEE Main-2019 Paper-2 examination.

3) Candidates submitting application for JMI’s B.Tech. as well as B.Arch. programs must appear in JEE Main-2019 Paper-1 as well as Paper-2 examinations.

4) The seats for admission to B.Tech. and B.Arch. programs at JMI will be allotted as per prescribed JMI’s admission procedure, applicable reservation of seats and the MERIT solely determined by the final rank in JEE Main-2019 Paper-1 and Paper-2 respectively.

B) Apply for B.Tech. & B.Arch. programs on JMI’s admission portal at: URL: http://www.jmicoe.in or http://www.jmi.ac.in)

Candidate applying at JMI has to submit 12 digit JEE Main 2019 application number in online application form, which is issued from JEE Main 2019 portal after submission of form.

Jamia Millia Islamia offers following B.Tech programmes (8 Sem Course):

1.    B.Tech. in Civil Engineering,

2.    B.Tech. in Computer Engineering

3.    B.Tech. in Electrical Engineering

4.    B.Tech. in Electronics & Comm Engineering

5.    B.Tech. in Mechanical Engineering

Jamia Millia Islamia offers following B.Arch programmes (5 Year Course):

1.    B. Arch.

2.    B. Arch. (Self Finance)

Reservation Categories:

1. General 2. Muslim 3. Muslim OBC/ST 4. Muslim Women 5. Jamia Internal 6. PWD (Person with Disability)

·         Candidate has to choose any one reservation category out of the above six in online admission form.

·         Over & Above Seats are reserved for Candidates from Jammu & Kashmir and Kashmiri Migrant.

·         Candidate has to choose any one category of these two categories (Detail prospectus will be available soon)

Eligibility:

For B.Tech Programmes

·         Sr. Sec. School Certificate (10+2) / Intermediate or its equivalent of a recognized Board with Physics, Chemistry and Mathematics as their main subjects, with not less than 55% marks in PCM.

OR

·         Diploma in Engineering recognized by AICTE or a state board of technical education of 3 or 4-year duration with not less than 55% marks.

For B.Arch Programmes

·         No candidate shall be admitted to architecture course unless she/he has passed an examination at the end of the 10+2 scheme of examination with at least 50% aggregate marks in Physics, Chemistry and

Mathematics and also at least 50% marks in aggregate of the 10+2 level examination or passed 10+3 diploma examination with Mathematics as compulsory subject with at least 50% marks in aggregate.

How to Apply:

JMI Admission Form Fee: Rs. 550/ + Applicable Bank Charges

IMPORTANT INSTRUCTIONS FOR CANDIDATES BEFORE APPLYING ONLINE

Keep the following items in your hand before applying:

Email id

Mobile no

Scanned photo

Scanned signature

Credit card, Net banking or ATM-cum-Debit card

Guidelines for filling-up online application form please visit website

Registration Slip:

·         A Registration Slip will be issued between 15th April to 25th April 2019, having applicant details of JEE Mains and JMI application form together i.e. photograph, roll no. application no , preference etc.

·         The applicants will be informed through SMS on their registered mobile number for checking of Registration slip.

·         The applicant is required to inform for correction (if any) on the help desk email ID (given below) latest by 05th May 2019.

·         No request for correction will be considered after the above dates.

NOTE:

·         No Change will be allowed in Photograph, Signature, Reservation category in online admission form after the form edit date is over.

·         Applicants are required to upload the photograph in JMI application form, same as in JEE Main 2019 application form.

HELPDESK NUMBERS

+91-9836219994, +91-9836289994, +91-9836319994, 011-26981717- Extn: 1408)

(Timing: 10 AM to 05 PM (Except Saturday & Sunday))

HELP DESK EMAIL: admission@jmicoe.in

Important Dates:

All Aspiring candidates are required to fill online application form from: 25th February, 2019 to 30th March, 2019

Forms open for editing (Applicants may correct, if any): 31st March to 3rd April, 2019

Date of Exam Will Be Announced Later

Comments:

To know more Information about this Exam please visit: www.jmi.ac.in

School of Planning and Architecture, SPA, New Delhi

School of Planning and Architecture, SPA, New Delhi
Deemed to be a University
4, Block-B, Indraprastha Estate
New Delhi, Delhi
Phone-No: 011- 2370 2375 2372 4383 2372 2382
Fax: 011- 2370 2383
Email: admission@apa.ac.in Website: www.spa.ac.in

About College:

The School of Planning and Architecture had a modest beginning in 1941 as a Department of Architecture of Delhi Polytechnic. It was later affiliated to the University of Delhi and integrated with the School of Town and Country Planning which was established in 1955 by the Government of India to provide facilities for rural, urban and regional planning. On integration, the School was renamed as School of Planning and Architecture in 1959. Recognizing the specialized nature of the fields in which the School had attained eminence, in 1979, the Government of India, through the then Ministry of Education and Culture, conferred on the School of Planning and Architecture the status of "Deemed to be a University". With this new status, the School has broadened its horizon by introducing new academic and extension programmes and promoting research and consultancy activities.

Course Name:

Master of Architecture (Architectural Conservation)

Master of Urban Design

Master of Design (Industrial Design)

Master of Planning (Environmental Planning)

Master of Planning (Housing)

Master of Planning (Regional Planning)

Master of Planning (Transport Planning)

Master of Planning (Urban Planning)

Master of Landscape Architecture

Master of Building Engineering and Management

Eligibility:

·         Architectural Conservation & Urban Design: Bachelor’s Degree in Architecture or Planning from a recognized university or equivalent.

·         Environmental Planning: Bachelor’s Degree in Planning or Architecture or Civil Engineering or Architectural Engineering or Environmental Engineering or Master’s Degree in Geography or Economics or Sociology or Environmental Science or Environmental Management of a recognized university or equivalent.

·         Regional Planning & Urban Planning: Bachelor’s Degree in Planning or Architecture or Civil Engineering or Architectural Engineering or M.A. Geography or Economics or Sociology from a recognized university or equivalent.

·         Housing: Bachelor’s Degree in Planning or Architecture or Civil Engineering or Architectural Engineering or Municipal Engineering or Building Engineering or M.A. in Sociology or Economics from a recognized university or equivalent.

·         Transport Planning: Bachelor’s Degree in Planning or Architecture or Civil Engineering or Architectural Engineering from a recognized University or equivalent or Master’s Degree in Statistics/ Operational Research/ Economics from a recognized university or equivalent.

·         Landscape Architecture: Bachelor’s Degree in Landscape Architecture or Architecture or Planning or Master’s Degree in Planning or equivalent post- graduate diploma of a recognized university/institution or certificate of completion of Pre-Landscape Architecture Course of the SPA, New Delhi.

·         Building Engineering & Management: Bachelor’s Degree in Civil Engineering or Building Engineering or Architecture or Architectural Engineering or Building Science or Five Year Diploma in Construction Technology or equivalent from a recognized university/institution established by an Act of Parliament or State Legislature.

·         Design (Industrial Design): Bachelor’s Degree in Architecture of a recognized university or equivalent or Bachelor’s Degree in Engineering/Design/Fine Arts of a recognized university or equivalent with valid CEED score (essential for non-architectural candidates) from approved streams.

MARKS: Candidates with at least 55 percent marks in aggregate at the qualifying Examination, 50% aggregate marks in respect of SC/ST/OBC

How to Apply:

Eligible candidates may download Application Form through School’s website and send it to the Section Officer (A&E Section) by Registered/ Speed Post to the School on or before 22nd March, 2019.

GENERAL INSTRUCTIONS:

An applicant can apply for single Programme only. Application fee for PG programme is Rs.2,500/-(Non Refundable) for Indian Nationals and US$ 300 (Non Refundable) for Foreign National/NRI/PIO/OCI to be paid by online 1. Through website of SPA, New Delhi, 2. Through SBI Collect. Short listed/eligible candidates shall be notified on the School’s website and must bring original certificates & self- attested photocopies and project work/portfolio etc. at the time of Test/ Interview. The School reserves the right to reject/cancel any application without assigning any reason to the applicant.

PG SCHOLARSHIPS: The scholarships to GATE or CEED (applicable only for ID course) qualified candidates will be paid to those who have valid Score Card.

Closing Date:

Application forms available on website of the School Tuesday, 26th February, 2019

Last date of receipt of Application (for PG Courses) Friday, 22nd March, 2019

Display of List of Eligible Candidates Wednesday, 27th March, 2019

Test/Interview (PG Courses) Monday, 1st to Wednesday, 3rd April, 2019

Display of Selection List Monday, 22nd April, 2019

Registration in respective Departments Wednesday, 24th July, 2019

Orientation Programme Friday, 26th July, 2019

Start of Academic Session Monday, 29th July, 2019

Comments:

To know more Information about this courses please visit: www.spa.ac.in

Ajeenkya DY Patil University, ADYPU, Pune

Ajeenkya DY Patil University, ADYPU, Pune
Charoli Bk.via Lohegaon
District Pune, Maharashtra
Phone-No: 020-67077942 67077943 91-8686868686 91-8080563795
Email: acet@adypu.edu.in Website: www.adypu.edu.in

About College:

Ajeenkya DY Patil University offers the best undergraduate and postgraduate programs in unique areas, linked to exemplary 'ADYPU Student Experience', which is supported by excellent facilities and highly motivated teaching staff. Our aim is to contribute to the creation of Innovation oriented Indian society. The aim is to develop new solutions that elevate the quality of life for every Indian by utilizing the new knowledge created. As future economic, financial & social paradigms evolve, the Ajeenkya DY Patil University is gearing up to new challenges & exploiting vibrant possibilities for growth through single-minded focus on innovation.

Course Name:

Bachelor of Design Automobile Design

Duration: 4 years, Full-Time

Eligibility:

XII'th in any discipline - Science / Arts / Commerce or 3 years Full-Time Diploma

Course Name:

Bachelor of Design Product Design

Duration: 4 years

Eligibility:

XII'th in any discipline - Science / Arts / Commerce or 3 years Full-Time Diploma

Course Name:

Bachelor of Design Graphic Design

Duration: 4 years

Eligibility:

XII'th in any discipline - Science / Arts / Commerce

Course Name:

Master of Design Automobile Design

Duration: 2 years, Full-Time

Eligibility:

Graduation in any discipline – Science / Arts / Commerce / Engineering

Course Name:

Postgraduate Diploma Digital Modeling

Duration: 9 Months

Eligibility:

Graduation in any discipline – Science / Arts / Commerce / Engineering or 3 years Full-Time Diploma in Engineering

Course Name:

Master of Design Engineering Product Design

Duration: 2 years, Full-Time

Eligibility:

Graduation in any discipline of Engineering

Course Name:

Master of Design Computer Interaction Design

Duration: 2 years

Eligibility:

Graduation in Design, Architecture, Engineering, Computer Science, Media Communication, Social Sciences, Psychology

Course Name:

BBA Sales & Marketing

Duration: 3 Years

Eligibility:

XII'th in Arts or Science or Commerce

Course Name:

BBA Entrepreneurship and Innovation

Duration: 3 Years

Eligibility:

XII'th in Arts or Science or Commerce

Course Name:

MBA Business Innovation & Strategy with specialization in HR, Finance and Marketing

Duration: 2 Years

Eligibility:

Graduation in any discipline - Science / Arts / Commerce / Engineering

Course Name:

MBA Media and Communication

Duration: 2 Years

Eligibility:

Graduation in any discipline

Course Name:

MBA Banking & Financial Services

Duration: 2 Years

Eligibility:

Graduation in any discipline with a minimum of 50% in graduation Must be below 26 years of age Must be from a regular mode of graduation (full time/part time) Have completed their graduation from Class X without any drops/gaps in years Graduation from an Indian University ONLY. Have completed graduation in a full time course

Course Name:

MBA Business Analytics

Duration: 2 Years

Eligibility:

Graduation in any discipline with a minimum of 50% in graduation Must be below 26 years of age Must be from a regular mode of graduation (full time/part time) Have completed their graduation from Class X without any drops/gaps in years Graduation from an Indian University ONLY. Have completed graduation in a full time course3 Years Full-Time3 Years Full-Time

Course Name:

BBA Financial Services

Duration: 3 Years Full-Time

Eligibility:

XII’th in Arts / Science or Commerce

Course Name:

BBA International Business

Duration: 3 Years Full-Time

Eligibility:

XII’th in Arts / Science or Commerce

Course Name:

BBA Financial Services & CMA

Duration: 3 years

Eligibility:

The minimum qualification required to apply is a pass in the 10+2 examination from PUC / ISC / CBSE or equivalent board or a programme recognized as equivalent there to by the university.3 years

Course Name:

BBA Logistics & Supply Chain Management

Duration: 3 years

Eligibility:

Undergraduates in any stream with min 55%

Course Name:

B.Com (Hons.) – CMA Integrated

Duration: 3 years

Eligibility:

The minimum qualification required to apply is a pass in the 10+2 examination in Science or Commerce or Arts from PUC / ISC / CBSE or equivalent board or a course recognized as equivalent there to by the University

Course Name:

MBA International Business

Duration: 3 years

Eligibility:

Bachelor's degree from a recognized university or equivalent with a minimum aggregate of 50% and a high score in GMAT/ CAT/MAT/XAT/ATMA/CMAT/AAT or any other acceptable management entrance exam.

Course Name:

MBA Digital Marketing & E-Commerce

Duration: 2 years

Eligibility:

Bachelor's degree from a recognized university or equivalent with a minimum aggregate of 50% and a high score in GMAT/ CAT/MAT/XAT/ATMA/CMAT/AAT or any other acceptable management entrance exam.

Course Name:

MBA Healthcare & Hospital Management

Duration: 2 years

Eligibility:

Undergraduates in science stream with min 55%

Course Name:

MSc Clinical Research

Duration: 2 years

Eligibility:

Undergraduates in science stream with min 55%

Course Name:

MBA – Human Resource

Duration: 2 years

Eligibility:

The minimum qualification required to apply is a Bachelor’s degree from a recognized university or equivalent with a minimum of 50% aggregate marks.

Course Name:

MBA – Marketing

Duration: 2 Years

Eligibility:

The minimum qualification required to apply is a Bachelor’s degree from a recognised university or equivalent with a minimum of 50% aggregate marks.

Course Name:

MBA Finance

Duration: 2 Years

Eligibility:

Any Graduate from a recognised University with 50% Marks

How to Apply:

To know more information about how to apply please contact here:

Ajeenkya DY Patil University

Charoli Bk.via Lohegaon, District Pune – 412105 Maharashtra , India

For immediate assistance, you can call us on 020 - 67077942 or +91-8080563795, from Monday to Friday between 10:00 AM - 5:00 PM IST, except on Public Holidays.

Closing Date:

Coming Soon…

Comments:

To know more Information about this courses please visit: www.adypu.edu.in

MIT Institute of Design MITID, Design Aptitude Test DAT 2019

About DAT 2019:

Design Aptitude Test, DAT 2019
Avanti, 3rd Floor, MIT Campus, Kothrud,Pune-411038, Maharashtra, India
Website: www.dat.net.in, www.mitid.edu.in, www.avantikauniversity.edu.in

Design Aptitude Test (DAT) is India's premier national entrance test jointly conducted by MIT Institute of Design (MIT-ID), Pune and Avantika University, Ujjain providing quality education in design. MIT Institute of Design (MIT-ID) and Avantika University have been established, operated and owned by MIT Group of Institutions, Pune. DAT is conducted primarily to evaluate and shortlist candidates for the under graduate and post graduate program.Candidates aspiring to pursue Undergraduate (B.Des), Post Graduate program (M.Des) at MIT Institute of Design (MIT ID), Pune and Avantika University, Ujjain have to take the common, mandatory Design Aptitude Test (DAT) 2019. A candidate needs to register for DAT. If shortlisted, he/ she would then need to attend the Studio Test and Personal Interview process conducted by respective of this institutes/university individually.

Course Name:

Bachelor of Design (B.Des) [Fashion Design, Fashion Communication] MIT institute of Design

Eligibility:

For Indian Nationals

B.Des program: 10+2 from any stream (From any of the State Boards/ CBSE/ ICSE/ ISC/ IB/ NIOS or equivalent exam)

For NRI, PIO, OCI and International Students

10th Std. /Equivalent

12th Std. /Equivalent

12th Std. Passing Certificate/ Provisional Certificate

Passport

PIO card (only for PIO students)

OCI Card (only for OCI students)

Citizen card (only in case of Nepali nationals)

Valid VISA (not applicable for Nepal and Bhutan students)

Valid Residential Permit (not applicable for Nepal and Bhutan students)

Course Name:

Bachelor of Design (B.Des) Avantika University

Eligibility:

For Indian Nationals

B.Des program: 10+2 from any stream (Any of the State Boards/ CBSE/ ICSE/ ISC/ CIE/ IB/ NIOS or equivalent exam)

For NRI, PIO, OCI and International Students

10th Std. /Equivalent

12th Std. /Equivalent

12th Std. Passing Certificate/ Provisional Certificate

Passport

PIO card (only for PIO students)

OCI Card (only for OCI students)

Citizen card (only in case of Nepali nationals)

Valid VISA (not applicable for Nepal and Bhutan students)

Valid Residential Permit (not applicable for Nepal and Bhutan students)

Course Name:

B.Tech (Computer Science and Engineering) Avantika University

Eligibility:

For Indian Nationals

B.Tech Program: 10+2 (Any of the State Boards/ CBSE/ ICSE/ ISC/ CIE/ IB/ NIOS or equivalent exam) with Physics, English, and Mathematics as compulsory subjects

For NRI, PIO, OCI and International Students

10th Std. /Equivalent

12th Std. /Equivalent

12th Std. Passing Certificate/ Provisional Certificate

Passport

PIO card (only for PIO students)

OCI Card (only for OCI students)

Citizen card (only in case of Nepali nationals)

Valid VISA (not applicable for Nepal and Bhutan students)

Valid Residential Permit (not applicable for Nepal and Bhutan students)

Course Name:

Master of Design (M.Des) MIT institute of Design

Fashion Management and Marketing (M.Des) MIT institute of Design

Design Management (M.Des) MIT institute of Design

Eligibility:

For Indian Nationals

M.Des program: Graduate from any discipline (10 +2 + 3 minimum)

For NRI, PIO, OCI and International Students

10th Std. /Equivalent

12th Std. /Equivalent

12th Std. Passing Certificate/ Provisional Certificate

Passport

PIO card (only for PIO students)

OCI Card (only for OCI students)

Citizen card (only in case of Nepali nationals)

Valid VISA (not applicable for Nepal and Bhutan students)

Valid Residential Permit (not applicable for Nepal and Bhutan students)

Course Name:

Master of Design (M.Des) Avantika University

Eligibility:

For Indian Nationals

M.Des program: Graduate from any discipline (10 +2 + 3 minimum)

For NRI, PIO, OCI and International Students

10th Std. /Equivalent

12th Std. /Equivalent

12th Std. Passing Certificate/ Provisional Certificate

Passport

PIO card (only for PIO students)

OCI Card (only for OCI students)

Citizen card (only in case of Nepali nationals)

Valid VISA (not applicable for Nepal and Bhutan students)

Valid Residential Permit (not applicable for Nepal and Bhutan students)

Course Name:

Fellowship [Vishwasheela Innovation Fellowship]

Eligibility:

For Indian Nationals

Fresh Under Graduates or Post Graduates

UG + 1-2 year experience

Startup founders

Any Innovators with an IDEA

For NRI, PIO, OCI and International Students

Fresh Under Graduates or Post Graduates

UG + 1-2 year experience

Startup founders

Any Innovators with an IDEA

How to Apply:

Admission Procedure

Stage 1: Registration for DAT (Design Aptitude Test)

Step 1: Register for DAT

Step 2: An automated verification link will be sent to your registered email ID. Activate your account by clicking the link.

Step 3: Provide the required details in the application form.

Step 4: Upload the passport size photograph, accept the declaration and submit the online application form.

Step 5: Proceed to payment option and pay Rs.3360 (Rs.3000 +12% GST) for Indian applicants and and Rs.5040 (Rs.4500 + 12% GST) for NRI, PIO, CIO and Foreign Nationals

Payment Mode:

• Online Payment through Net Banking/ Credit Card/ Debit Card

• Demand Draft in favour of MIT ADT University-MIT Institute of Design

Demand Draft should be sent to following address

Admission Cell

MIT Institute of Design,

Rajbaug, Loni Kalbhor

Pune Solapur Highway

Pune-412201

Step 6: On scrutiny, verification and acceptance of application form, Admit card will be generated and sent to candidates registered email id. Candidates can also download the Admit Card by login to his/ her profile on DAT portal.

Note

Applications are invited through online mode only

The Design Aptitude Test (DAT) is conducted jointly by MIT Institute of Design MITID Pune and Avantika University Ujjain.

Stage 2: Design Aptitude Test (DAT)

Design Aptitude Test (DAT) will be conducted on 7tht April 2018 between 10 AM to 1 PM at various test centres across India. (Ahmedabad, Bengaluru, Bhopal, Indore, Chandigarh, Chennai, Delhi, Goa, Hyderabad, Jaipur, Kolkata, Lucknow, Mumbai, Nagpur, Pune)

The DAT committee reserves its right to change or cancel any of these centres.

Based on scores obtained from DAT, shortlisted candidates will be called for studio test and personal interview.

MITID and Avantika University will have their separate merit list of shortlisted candidates.

Stage 3: Studio Test and Interview

·         The studio tests followed by personal interviews will be conducted separately by MITID at Pune campus and Avantika University at Ujjain campus.

·         The list of shortlisted candidates for the Studio test and Personal Interview will be announced on the respective websites of MITID and Avantika University.

·         All those candidates called for the studio test and personal interview are required to attend the studio tests and interview, which completes the process of selection.

·         The Admission Committee decides the procedures, grades and weightage every year.

·         The norms for the selection are the sole prerogative of the Admission Committee and the decision of the Admission Committee and the Management in any of the matters concerning the admission process and selection will be final. Any direct or indirect attempt to influence the admission committee or its members, academic office bearers or management will lead to the automatic disqualification of the candidate(s).

Closing Date:

Form Submission: 28th February, 2019

Design Aptitude Test: 7th April, 2019

DAT Result: 22nd April, 2019

MIT ID B.Des Studio Test and Interview: 13th to 18th May, 2019

Avantika University B.Des Studio Test and Interview: 6th to 11th May, 2019

MIT ID M.Des Studio Test and Interview: 24th to 28th May, 2019

Comments:

To know more Information about this Exam please visit: www.dat.net.in

Sharda University, SU, Greater Noida

Sharda University, SU, Greater Noida
Plot No. 32-34, Knowledge Park III
Greater Noida, Uttar Pradesh
Phone-No: 91-120-31210012
Email: admission@sgi.edu.in Website: www.sharda.ac.in

About College:

Sharda University is a leading Educational institution based out of Greater Noida, Delhi NCR. A venture of the renowned SGI group, the University has established itself as a high quality education provider with prime focus on holistic learning and imbibing competitive abilities in students. The University is approved by UGC and prides itself in being the only multi-discipline campus in the NCR, spread over 63 acres and equipped with world class facilities.Sharda University promises to become one of the India's leading universities with an acknowledged reputation for excellence in research and teaching. With its outstanding faculty, world class teaching standards, and innovative academic programmes, Sharda intends to set a new benchmark in the Indian education system.

Course Name:

Ph.D (Full-time and Part-time) [Pharmacy, English, Education, Architecture, Basic Science, Mass Communication, Management, Law, Engineering]

Eligibility:

Ph.D (Full-time and Part-time) Architecture:

Age Relaxation:

·         SC/ST Students:- 5% relaxation in Eligibility criteria

·         OBC Students:- 2.5% relaxation in Eligibility criteria

·         The above relaxation is for non-council courses. For Council courses kindly refer to the respective Council guidelines.

Ph.D (Full-time and Part-time) Basic Science:

·         MS/M.Tech with 1st Division or CGPA of 6.75 or above on a 10-point scale

·         Sciences: Post graduation with 55% marks or a CGPA of 6.25 or above

·         UGC/CSIR (JRF), NET/GATE qualified candidates may be exempted from appearing in the entrance examination. However, they will necessarily have to undergo an interview

Age Relaxation:

·         SC/ST Students:- 5% relaxation in Eligibility criteria

·         OBC Students:- 2.5% relaxation in Eligibility criteria

·         The above relaxation is for non-council courses. For Council courses kindly refer to the respective Council guidelines.

Ph.D (Full-time and Part-time) Education:

Age Relaxation:

·         SC/ST Students:- 5% relaxation in Eligibility criteria

·         OBC Students:- 2.5% relaxation in Eligibility criteria

·         The above relaxation is for non-council courses. For Council courses kindly refer to the respective Council guidelines.

Ph.D (Full-time and Part-time) Engineering:

·         MS/M.Tech with 1st Division or CGPA of 6.75 or above on a 10-points scale

·         Sciences: Post graduation with 55% marks or a CGPA of 6.25 or above

·         UGC/CSIR (JRF), NET/GATE qualified candidates may be exempted from appearing in the entrance examination. However, they will necessarily have to undergo an interview

·         In exceptional cases a candidate with a B.Tech/BS degree with min. 75% marks or CGPA of 8.25 may be directly enrolled in Ph.D in relaxation of the prescribed qualification, provided he/she is working with an institution/organization of National repute engaged in research work and has over 5 years of research exp. and has published at least 4 papers in referred/national/international journals. DRC may consider the eligibility for admission of such candidate base on his/her published work/patents etc. If deemed necessary, DRC may suggest completion of few audit/credit courses for such candidates

Age Relaxation:

·         SC/ST Students:- 5% relaxation in Eligibility criteria

·         OBC Students:- 2.5% relaxation in Eligibility criteria

·         The above relaxation is for non-council courses. For Council courses kindly refer to the respective Council guidelines.

Ph.D (Full-time and Part-time) English:

MA in English with 55%Marks

Age Relaxation:

·         SC/ST Students:- 5% relaxation in Eligibility criteria

·         OBC Students:- 2.5% relaxation in Eligibility criteria

·         The above relaxation is for non-council courses. For Council courses kindly refer to the respective Council guidelines.

Ph.D (Full-time and Part-time) Law:

·         LL.M/ML degree (with a minimum 55% marks (50% for SC/ST students) from Universities/ Colleges/ Institutions recognized by Bar Council of India and eligible for enrolment as an advocate in India

OR

·         LL.M/ML degree from any foreign University with at least 55% marks in aggregate or equivalent grade and recommendations of the equivalence committee

Age Relaxation:

·         SC/ST Students:- 5% relaxation in Eligibility criteria

·         OBC Students:- 2.5% relaxation in Eligibility criteria

·         The above relaxation is for non-council courses. For Council courses kindly refer to the respective Council guidelines.

Ph.D (Full-time and Part-time) Management:

·         MBA with 1st division or CGPA of 6.75 or above on a 10-point scale

·         Humanities/Commerce: Post-graduation with 55% marks or a CGPA of 6.25 or above on a 10-point scale

·         UGC/CSIR (JRF), NET qualified candidates may be exempted from appearing in the entrance examination. However, they will necessarily have to undergo an interview

Age Relaxation:

·         SC/ST Students:- 5% relaxation in Eligibility criteria

·         OBC Students:- 2.5% relaxation in Eligibility criteria

·         The above relaxation is for non-council courses. For Council courses kindly refer to the respective Council guidelines.

Ph.D (Full-time and Part-time) Mass Communication:

·         Post graduation with 55% marks or a CGPA of 6.25 or above

·         UGC/CSIR (JRF), NET/GATE qualified candidates may be exempted from appearing in the entrance examination. However, they will necessarily have to undergo an interview

Age Relaxation:

·         SC/ST Students:- 5% relaxation in Eligibility criteria

·         OBC Students:- 2.5% relaxation in Eligibility criteria

·         The above relaxation is for non-council courses. For Council courses kindly refer to the respective Council guidelines.

Ph.D (Full-time and Part-time) Pharmacy:

Age Relaxation:

·         SC/ST Students:- 5% relaxation in Eligibility criteria

·         OBC Students:- 2.5% relaxation in Eligibility criteria

·         The above relaxation is for non-council courses. For Council courses kindly refer to the respective Council guidelines.

How to Apply:

Applications are invited on prescribed application form only which can be filled online/collecting hard copy from University/downloading application and sending complete form along with the Demand Draft of Rs. 1200/- (One Thousand Two Hundred Only) in favour of Sharda University, payable at Greater Noida.

Application Fee: Rs. 1200.00 (Rupees One Thousand Two Hundred Only)

Admissions to different Ph.D. courses (1802) of Sharda University will be made strictly on merit and availability of seats through Entrance Test followed by an Interview. The Ph.D. Programme is governed by Ph.D. Ordinance 2017 (available on university website) of Sharda University. The total number of seats in each subject is indicated in table on university website against each School/ Department. Full-time eligible students are entitled for the monthly “fellowship cum assistantship” as per Sharda University rules.

Closing Date:

Last date of submission of Application Form: 17th December, 2018 (Monday)

Date of Entrance Test: 20th December, 2018 (Thursday) (10:30 am to 12:30 pm)

Date of Interview: 21st December, 2018 (Friday) (09:00 am onwards)

Comments:

To know more Information about this Course please visit: www.sharda.ac.in

Hindustan Institute of Technology and Science, HITS, Chennai

Hindustan Institute of Technology and Science, HITS, Chennai
Deemed to be university under section 3 of the UGC Act, 1956
40, GST Road, St. Thomas Mount
Chennai, Tamil Nadu
Phone-No: 044-22341389 2508 18004254438
Fax: 044-22342170
Email: hitseee@hindustanuniv.ac.in Website: www.hindustanuniv.ac.in

About College:

Hindustan College of Engineering, started in the year 1985, was conferred the "University Status" by University Grants Commission (UGC), Government of India, Under Section 3 of UGC Act 1956 from the academic year 2008-09 and under the name HITS (Hindustan Institute of Technology and Science). Today, Hindustan Institute of Technology and Science is one of the most sought after engineering Institutions in Tamil Nadu, reputed for its highly qualified and experienced faculty and excellent infrastructural facilities for curricular and extracurricular activities, the University has maintained an enviable academic excellence right from its inception. The student community comprises of students from all over India and Overseas. We have students hailing from Afghanistan, Bangladesh, Bhutan, China, Egypt, Ethiopia, France, Indonesia, Kenya, Korea, Liberia, Libya, Mauritius, Nigeria, Oman, Rwanda, Singapore, South Africa, South Korea, Sudan, U.A.E, Thailand, Vietnam, Tanzania, USA, etc.

Course Name:

Bachelor of Technology (BTech) [Specialization: Aeronautical Engineering, Aerospace Engineering, Automobile Engineering, Bio Technology, Chemical Engineering, Civil Engineering, Computer Science & Engineering, Electrical & Electronics Engineering, Electronics & Communication Engineering, Mechanical Engineering, Mechatronics Engineering, Information Technology, Information Technology (Cyber Security), Architecture, Interior Design, Fashion & Apparel Design]

Bachelor of Design (BDes)

Eligibility:

Candidates seeking admission to the first year of B.Tech degree programme must have passed the Higher Secondary Examination (12th) prescribed by the State Board/Intermediate/Central Board of Secondary Education (CBSE, New Delhi)/The Council for Indian School Certificate Examination (ISCE, New Delhi) with Mathematics, Physics & Chemistry or equivalent subjects.

·         Academic Stream: A minimum average of 50% in Physics, Chemistry, and Mathematics put together.

·         Vocational Stream: A minimum average of 50% marks in the related subjects and vocational subjects (Theory and Practical).

·         For B.Tech. Bio Technology Only: A minimum average of 50% in Physics, Chemistry and Mathematics / Biology put together

AGE LIMIT: Upper age limit must be 19 years as on 30th April 2019.

Course Name:

Bachelor of Architecture (BArch)

Eligibility:

All applicants for B.Arch. Course should have written the National Aptitude Test in Architecture (NATA) (www.nata.in / www.nata.nic.in) conducted by Council of Architecture, India and secure the minimum eligible marks as per COA norms.

AGE LIMIT: Upper age limit must be 19 years as on 30th April 2019.

How to Apply:

INSTRUCTIONS FOR FILLING THE ONLINE APPLICATION FORM FOR HINDUSTAN INSTITUTE OF TECHNOLOGY AND SCIENCE

1.      E-mail ID (which must be valid for at least one year from the date of application. In case, a candidate does not have a valid personal email ID, he / she should create his / her new email ID before applying Online.

2.      Candidate can upload his photograph and signature ensuring that both the photograph and signature are in .jpg format and less than 200 KB in size.

3.      The Applicant for admission should be a resident Indian national and should have studied in schools located in India in the preceding two years.

4.      A pass in 10+2 or its equivalent and minimum 60% aggregate in Mathematics, Physics & Chemistry.

5.     B.Tech:

(a) A pass in 10+2 or its equivalent having a minimum total aggregate of 60% with English and Mathematics as subject of study or 10+3 Diploma (Any stream) recognized by Central/ State Government with 70% aggregate marks.

(b) A pass in National Aptitude Test in Architecture (NATA) conducted by the council of Architecture.

6.      Applicant who are waiting for Higher Secondary/+2 Examination results are eligible for the HITSEEE.

7.     Application fee is Rs. 1200+ Bank Charges for HITSEEE 2019

8.      The Online application form involves the following process: Registration and then Login to fill up the Personal details, Uploading of photograph, Selection of test centres, online payment of registration fee.

9.      Print Provisional Registration Slip and carefully retain it for future reference. You are not required to courier it or email it.

10.   Under no circumstances, he / she should share /mention registration no. to / or of any other person.

11.  Online Form Help line Number:- 6374316299

Closing Date:

Date of Issue of HITSEEE 2019 Application Form: 5th December, 2018

Last Date for HITSEEE 2019 Application Form: 18th March, 2019

Last Date for Submission of Filled-In Application Form: 8th April, 2019

Online Entrance Exam Dates (Chennai Centres): 28th April, 2019 & 2nd May, 2019

Online Entrance Exam Dates (Other Centres): 28th April, 2019 & 29th April, 2019

Counselling Dates: 15th May, 2019 & 25th May, 2019

Comments:

To know more Information about this Course please visit: www.vssut.ac.in

Design Aptitude Test DAT 2018, National Institute of Design NID DAT 2018

About NID DAT 2018:

For the Academic Year 2019-20, the National Institute of Design (NID) invites online applications for the following Programs from Indian and International Applications:

·         Bachelor of Design (B.Des.) [at NID Ahmedabad Campus] Duration: 4 years

·         Master of Design (M.Des) [at Ahmedabad, Gandhinagar, and Bengaluru Campus] Duration: 2.5 years

·         Graduate Diploma Program in Design (GDPD) [at Vijayawada & Kurukshetra] Duration: 4 years

National Institute of Design (NID) conducts NID Design Aptitude Test 2019 will offer admissions to aspirants in the Bachelor of Design (B.Des) as well as Master of Design (M.Des) Program on the basis of their performance in the entrance test.

The National Institute of Design (NID) offers 4-years Bachelor of Design (B.Des) Program at Ahmedabad and 2½ years Master of Design (M.Des) Program at Ahmedabad, Gandhinagar; Bengaluru Campuses and Graduate Diploma Program in Design - GDPD - 4 years at Vijayawada & Kurukshetra.

Note: The National Institute of Design has authorized the All India Management Association, New Delhi, to process all its applications for the M.Des., B.Des. and GDPD programmes.

Eligibility:

For B.Des & GDPD:

All applicants applying for the B.Des and GDPD programs must fulfill both the following criteria; of age and education qualification:

Age Limit

·         For Indian Nationals in General Category: Upper age limit for candidates is 20 years as on 30th June 2019. Only those candidates born on or after 01st July 1998 are eligible to apply

·         For Indian Nationals in Reserved Category (OBC-NCL, SC, ST): Upper age limit for candidates is 23 years as on 30th June 2019. Only those candidates born on or after 01st July 1995 are eligible to apply

·         For Indian Nationals in PwD Reserved Category: Upper age limit for candidates is 25 years as on 30th June 2019. Only those candidates born on or after 01st July 1993 are eligible to apply

·         For Foreign Nationals in Overseas (Supernumerary) Category: Upper age limit for candidates is 20 years as on 30th June 2019. Only those candidates born on or after 01st July 1998 are eligible to apply

Educational Qualification:

Applications for academic year 2019–19 are open to applicants who have passed or will appear for higher secondary (10+2) qualifying examinations in the academic year 2019-20 in any stream (Science, Arts, Commerce, etc.) from any recognised board of education such as CBSE, IB, ICSE or their equivalent

Exams considered equivalent to these are as follows:

·         Final examination of the 10+2 system under a central or state board recognised by the Association of Indian Universities (AIU, Refer www.aiuweb.org)

·         Intermediate or two-year pre-university examination under a board or university recognised by the Association of Indian Universities (AIU, Refer www.aiuweb.org)

·         Final examination of the two-year course of the Joint Services Wing of the National Defence Academy

·         Senior secondary school examination under the National Institute of Open Schooling, with a minimum of five subjects

·         Any public school, board or university examination completed in India or in any foreign country recognised as equivalent to the 10+2 system by the Association of Indian Universities (AIU, Refer www.aiuweb.org)

·         H.S.C. vocational examination

·         General Certificate Education (GCE) examination at the Advanced (A) level taken in London, Cambridge or Sri Lanka

·         High School Certificate Examination from Cambridge University or an International Baccalaureate diploma from the International Baccalaureate Office, Geneva

·         Candidates who have completed final examinations for class XII (or equivalent) outside India or from a board not specified above should produce a certificate from the Association of Indian Universities (AIU) confirming that the examination they have passed is equivalent to the Class XII examination conducted in India

Overseas Category (Supernumerary) candidates:

Foreign citizens - applicants holding citizenship of a country other than the Republic of India - are eligible to apply only under the overseas (supernumerary) category, provided they fulfill all the eligibility criteria.

For M.Des:

All applicants applying for the M.Des. Programme (any discipline) must fulfill both the following criteria; of age and education qualification

Age Limit:

·         For Indian Nationals in General Category: Upper age limit for candidates is 30 years as on 30th June 2019. Only those candidates born on or after 01st July 1988 are eligible to apply

·         For Indian Nationals in Reserved Category (OBC-NCL, SC & ST): Upper age limit for candidates is 33 years as on 30th June 2019. Only those candidates born on or after 01st July 1985 are eligible

·         For Indian Nationals in PwD Reserved Category: Upper age limit for candidates is 35 years as on 30 June 2019. Only those candidates born on or after 01st July 1983 are eligible

·         For Foreign Nationals in Overseas (Supernumerary) Category: Upper age limit for candidates is 30 years as on 30 June 2019. Only those candidates born on or after 01st July 1988 are eligible to apply

Educational Qualification:

·         In addition to the above, the candidate must possess at least one of the following minimum qualifications to be considered eligible for admissions:

·         Bachelor degree of minimum 4-year duration in any specialization, after 10+2 system, from any university or institute recognised by law in India; Condition: Applicant must (have passed/have appeared for/be appearing for) the Bachelor degree exams before June 2019 or

·         Bachelor degree of minimum 3-year duration in any specialization, under the 10+2 system. Applicants must have passed the Bachelor degree exams before July 2018; or

·         Full-time Diploma of minimum 4-year duration in Design/Fine Arts/Applied Arts/ Architecture, after 10+2 system, from any university or institute recognised by law in India. Condition: Applicants must (have passed/have appeared for/be appearing for) the Diploma Exams before June 2019

Overseas Category (Supernumerary candidates):

Foreign citizens - applicants holding citizenship of a country other than the Republic of India - are eligible to apply only under the overseas category, provided they fulfill all the eligibility criteria. Of the seats available for the M.Des, 15% supernumerary seats have been created for overseas applicants.

Design Aptitude Test (DAT)

All candidates applying for B.Des, GDPD and M.Des Programs and having made the necessary payment for registration online will be called for the Design Aptitude Test

The Design Aptitude Test (DAT) Prelims primarily evaluates each candidate on the following abilities:

·         Knowledge

·         Analysis

·         Comprehension

·         Creativity

·         Visualisation

DAT Prelims will consist of two parts:

Part I: Multiple Choice Questions (MCQs) marked out of 70 points. The responses of this part will be recorded on an OMR sheet and evaluated digitally

Part II: Subjective questions marked out of 30 points, with responses to be provided in visual and/or written formats. The Design Aptitude Test (Prelims) will include an examination of three hours duration

This will be a pen-and-paper test.

The question paper will be in English. All questions are compulsory.

There will be no negative marking.

DAT Mains 2019 Exam Pattern

DAT Mains 2019 will consist of tests in different formats such as drawing/sketching, hands-on model making, group discussions, presentations, etc.

These will be marked out of 100 points and will be conducted in English

NID DAT Merit List 2019

Based on the scores obtained in the Design Aptitude Test (DAT), separate NID DAT 2019 Merit Lists will be prepared for each category (Open, OBC-NCL, SC, ST &PwD). Based on the merit list of DAT Prelims, eligible candidates will have to appear for DAT Mains

The number of candidates shortlisted will be no less than three times the number of seats available per category in that discipline or program. The final merit lists for the B.Des. programs will be generated category wise, based on the sum total of the weighted scores obtained by the candidate at each stage of the admission process

Test Centres for DAT 2019

DAT will be conducted in the following cities in India: Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Chandigarh, Chennai, Dehradun, Guwahati, Hyderabad, Kolkata, Lucknow, Mumbai, Nagpur, New Delhi, Ranchi, Thiruvananthapuram, and Vijayawada

How to Apply:

NID 2019 Application Process:

·         Candidates aspiring for admission to the programs may apply online or download application form from our official website and follow the steps below:

·         Read and apprise yourself with the information on eligibility criteria, number of seats, test centres, reservation policy and other relevant information related to admissions to B.Des and M.Des Programmes at NID in the Admissions Information booklet available on the website

·         Application Form of NID 2019 is available from 09th November 2018 onwards. Aspirants will be able to fill the form in online mode only. The application fee is Rs.2000/- for General category candidates and Rs.1000 for SC/ST/PwD candidates

·         Relevant information related to admissions to GDPD Program at NID Vijayawada is provided in the NID Vijayawada prospectus, available on the website.

Application Fee:

Candidates can pay the application fee via Online (by Credit Card/ Debit Card) or by Demand Draft. If paying the fee by DD take a printout of their NID Entrance Exam 2019 application form and thereafter send it along with the DD. Also, aspirants need to fill all the details regarding their DD in their online application form

Important Dates:

Last date for submitting online applications: 23rd November, 2018 (Thursday) on 2 pm

Last date for submitting online applications with late fees: 24th to 30th November, 2018 (Thursday) on 2 pm

Design Aptitude Test (DAT) Prelims on: 6th January, 2019 (Sunday)

Comments:

To know more Information about this course please visit: www.admissions.nid.edu

Indian Institute of Technology, IIT, Guwahati

Indian Institute of Technology, IIT, Guwahati
AICTE
North Guwahati, Guwahati, Assam
Phone-No: 0361 – 2583000
Fax: 0361-2690762
Email: pro@iitg.ac.in Website: www.iitg.ac.in

About College:

Indian Institute of Technology Guwahati, the sixth member of the IIT fraternity, was established in 1994. The academic programme of IIT Guwahati commenced in 1995. At present the Institute has eleven departments and three inter-disciplinary academic centres covering all the major engineering, science and humanities disciplines, offering BTech, BDes, MA, MDes, MTech, MSc and PhD programmes. Within a short period of time, IIT Guwahati has been able to build up world class infrastructure for carrying out advanced research and has been equipped with state-of-the-art scientific and engineering instruments. Indian Institute of Technology Guwahati's campus is on a sprawling 285 hectares plot of land on the north bank of the river Brahmaputra around 20 kms. from the heart of the city. With the majestic Brahmaputra on one side, and with hills and vast open spaces on others, the campus provides an ideal setting for learning.

Course Name:

Ph.D. in Engineering

Eligibility

For admission to the PhD Programme in Engineering departments, a candidate must satisfy one of the following criteria:

1.    Master's degree in Engineering/Technology/Medical Sciences/Veterinary Sciences/Pharmacy in a relevant area with a minimum Cumulative Performance Index (CPI) of either 6.0 or 60% of marks.

2.    Four-year Bachelor's degree in Engineering/Technology/Medical Sciences or equivalent in a relevant area with a minimum CPI of either 7.0 or 70% of marks.

Or the candidate must satisfy the relevant specific criteria given below.

3.    A candidate having a Four-year Bachelor's degree in Engineering/Technology or equivalent in a relevant area, with a Postgraduate Degree in Management Science(Finance) or MBA with Finance specialization or equivalent, is also considered for admission in the area of specialization `Construction Management, of the Department of Civil Engineering. The candidate should have a minimum of either 6.0 CPI or 60% marks in Bachelor's level and either 6.0 CPI or 60% marks in the postgraduate degree.

4.    A candidate having MSc degree with Mathematics as a subject at bachelor's level is also considered for admission in the Department of Civil Engineering. The candidate should have a minimum of either 7.0 CPI or 70% marks in Master's level with consistent first class at other levels.

5.    A candidate having a Two-year Master's degree (after completion of 4-year Bachelor's degree) or three-year Master's degree (after completion of 3-year Bachelor's degree) in Engineering/ Technology/Science in a relevant area with minimum Cumulative Performance Index (CPI) of either 6.0 or 60% of marks is also considered for admission in to PhDProgramme in Biosciences and Bioengineering.

6.    A candidate with a Two-year MSc degree (after completion of 3-year Bachelor's degree) in a relevant area with minimum CPI of either 7.0 or 70% marks, is also considered for admission in to PhD Programme in Biosciences and Bioengineering.

7.    Postgraduates in Computer Science (ALCCS) from Institution of Electronics and Telecommunication Engineers (IETE), with a minimum Cumulative Performance Index (CPI) of either 6.0 or 60% of marks, are also eligible to apply for admission in to PhD programme in Computer Science and Engineering

8.    A regular student of IIT Guwahati who is continuing his/her MTech studies and having a minimum CPI of 8.0 at the end of second semester may be enrolled in the PhD programme of the Department in the beginning of his/her third semester of study. Such students can receive only PhD Degree.

9.    A student of IIT Guwahati who is continuing his/her BTech studies and having a minimum CPI of 7.0 at the end of sixth semester may be enrolled in the PhD programme of the Department in the beginning of his/her seventh semester of study. Such students can receive dual BTech and PhD Degree. Both the degrees will be awarded after completion of PhD degree.

Relaxation for SC/ST/PwD Candidates: Eligibility criteria will be relaxed by 5% marks or 0.5 CPI for SC/ST/PwD applicants.

Course Name:

Ph.D. in Design

Eligibility:

For admission to the PhD Programme in Design, a candidate must satisfy one of the following criteria:

1.    Candidates having MArch/ MDes degree or MTech/ ME degree in a relevant area, with a minimum CPI of either 6.0 or 60% of marks.

2.    Master's degree in Applied Arts/ Ergonomics/ Fine Arts/ Psychology/ Physiology/ Occupational Safety and Health/ Journalism/ Mass Media Communication with a minimum CPI of either 6.0 or 60% marks.

3.    Two-year Master's degree in Management (MBA or equivalent) with a minimum CPI of either 6.0 or 60% marks with relevant studies in Design field, and Bachelor's degree in any discipline.

4.    Four-year Bachelor's degree or equivalent in Design or Engineering/Technology or Five-year BArch degree or equivalent in a relevant area with a minimum CPI of either 7.0 or 70% of marks.

5.    Four-year Undergraduate Diploma in Design (NID or equivalent), with postgraduate qualification in relevant area with a minimum CPI of either 6.0 or 60% marks.

6.    A two-year Post-graduate Diploma in Design and relevant areas (NID/CEPT or equivalent) with first class at Bachelor's level.

7.    BFA (4-year professional programme, after 10+2)/ GD Art (5-year programme after 10th standard) with one-year professional experience, with a minimum CPI of either 7.0 or 70% of marks.

8.    Master of Computer Application(MCA) degree, with one year of professional experience, with a minimum CPI of either 6.0 or 60% of marks.

9.    A regular student of IIT Guwahati who is continuing his/her MDes studies and having a minimum CPI of 8.0 at the end of second semester may be enrolled in the PhD programme of the Department in the beginning of his/her third semester of study. Such students can receive only PhD Degree.

10.  A student of IIT Guwahati who is continuing his/her BDes studies and having a minimum CPI of 7.0 at the end of sixth semester may be enrolled in the PhD programme of the Department in the beginning of his/her seventh semester of study. Such students can receive dual BDes and PhD Degree. Both the degrees will be awarded after completion of PhD degree.

Relaxation for SC/ST/PwD Candidates: Eligibility criteria will be relaxed by 5% marks or 0.5 CPI for SC/ST/PwD applicants.

Course Name:

Ph.D. in Sciences

Eligibility:

For admission to the PhD Programme in Science Departments, a candidate must satisfy one of the following criteria:

1.    Master's degree in Science in a relevant area with a minimum CPI of either 6.0 or 60% of marks.

2.    Master's degree in Engineering/Technology/Design in a relevant area with a minimum CPI of either 6.0 or 60% of marks.

3.    Four-year Bachelor's degree in a related area in Engineering/ Technology/ Design/ Science in a relevant area with a minimum CPI of either 7.0 or 70% of marks.

Relaxation for SC/ST/PwD Candidates: Eligibility criteria will be relaxed by 5% marks or 0.5 CPI for SC/ST/PwD applicants.

Course Name:

Ph.D. in Humanities and Social Sciences

Eligibility:

For admission to the PhD Programme in the Department of Humanities and Social Sciences (HSS), a candidate must satisfy one of the following criteria:

1.    Master's degree in Arts/Commerce/Science in a relevant area with a minimum of either 5.5 or 55% marks or equivalent.

2.    Master's degree in Engineering/Technology/Design in a relevant area with a minimum CPI of either 6.0 or 60% marks.

3.    Four-year Bachelor's degree in Engineering/ Technology/ Design or equivalent in a relevant area with a minimum CPI of either 7.0 or 70% marks.

Relaxation for SC/ST/PwD Candidates: Eligibility criteria will be relaxed by 5% marks or 0.5 CPI for SC/ST/PwD applicants.

Course Name:

Ph.D. in Center for the Environment, Center for Energy, Center for Nanotechnology

Eligibility:

For admission to the PhD Programme in the Center for the Environment, Center for Energy and Center for Nanotechnology, a candidate must satisfy one of the following criteria:

1.    Master's Degree in Engineering/Technology/Design/Architecture/Medical Sciences in a relevant area with a minimum CPI of either 6.0 or 60% of marks.

2.    Four-year Bachelor's degree in Engineering/Technology/Medical Sciences or equivalent in a relevant area with a minimum CPI of either 7.0 or 70% of marks.

3.    Master's degree in Science in a relevant area with a minimum CPI of either 6.0 or 60% marks.

Master's degree in Social Sciences, in a relevant area, with a minimum CPI of either 6.0 or 60% marks, is also considered for admission to PhD in the Centre for the Environment.

Relaxation for SC/ST/PwD Candidates: Eligibility criteria will be relaxed by 5% marks or 0.5 CPI for SC/ST/PwD applicants.

Course Name:

Ph.D. in Center for Linguistic Science and Technology

Eligibility:

For admission to the PhD Programme in the Center for Linguistic Science and Technology, a candidate must satisfy one of the following criteria:

1.    Master's degree in Engineering/ Technology in CSE / ECE / EEE or equivalent / Master of Design with a minimum Cumulative Performance Index (CPI) of either 6.0 or 60% of marks.

2.    Master of Science in CSE / IT / ECE / Physics / Mathematics / Statistics/Speech and Language Pathology/ Audiology or equivalent, with a minimum CPI of either 6.0 or 60% of marks.

3.    Master of Arts in Linguistics/any language with specialization in Linguistics/Language Studies or equivalent, with a minimum CPI of either 5.5 or 55% of marks.

4.    Four-year Bachelor's degree in Engineering/ Technology in CSE / ECE / EEE or equivalent / Four-year Bachelor's degree in Design, with a minimum CPI of either 7.0 or 70% of marks.

5.    Four-year Undergraduate Diploma in Design (NID/ CEPT or equivalent), with postgraduate qualification in relevant area with a minimum CPI of either 6.0 or 60% marks.

6.    A two-year Postgraduate Diploma in Design (NID/ CEPT or equivalent) with first class at Bachelor's level.

Relaxation for SC/ST/PwD Candidates: Eligibility criteria will be relaxed by 5% marks or 0.5 CPI for SC/ST/PwD applicants.

Course Name:

Ph.D. in Center for Rural Technology

Eligibility:

For admission to the PhD Programme in the Center for Rural Technology, a candidate must satisfy one of the following criteria:

1.    Master's degree in Engineering/ Technology/ Environmental Science/Agriculture and other relevant fields with a minimum Cumulative Performance Index (CPI) of either 6.0 or 60% of marks.

2.    Master of Science with a minimum CPI of either 6.0 or 60% of marks.

3.    Four-year Bachelor's degree in Engineering/Technology/Agriculture or equivalent in a relevant area with a minimum CPI of either 7.0 or 70% of marks.

Relaxation for SC/ST/PwD Candidates: Eligibility criteria will be relaxed by 5% marks or 0.5 CPI for SC/ST/PwD applicants.

Note:
Requirements for Institute Assistantship/ External Fellowship (Only for Regular & Full Time Category Candidates)

The Institute Assistantships/ External Fellowships are available only for Indian Nationals who are admitted under Regular & Full Time Category into PhD programmes.

The present rates of Institute assistantships are: JRF: Rs.25,000/- per month for first two years of PhD programme and SRF: Rs.28,000/- per month for next three years of PhD programme (that is, assistantship is only for a maximum of 60 months from the date of admission into PhD programme).

REQUIREMENT OF VALID GATE/ CEED/ NET/ INSPIRE:

All Regular and Full Time Category Candidates must satisfy one of the following criteria in addition to Eligibility Criteria related to Qualifying Degree.

1.    B.E./ B.Tech./ B.Des. or equivalent with valid and qualifying GATE score (valid and qualifying CEED score for PhD in Design) above the prescribed cut-off level.

2.    M.Sc. or equivalent with valid and qualifying GATE score above the prescribed cut-off level.

3.    M.Sc. or equivalent with valid NET-JRF qualification.

4.    M.A. in Humanities and Social Sciences Subjects or equivalent with valid NET qualification.

5.    Qualified in any other National Level Examination for Research Fellowship for pursuing PhD and it should be valid for another 3 to 6 months from the Date of admission to PhD programme.

EXEMPTION FROM THE REQUIREMENT OF VALID GATE/ CEED/ NET/ INSPIRE:

A Regular and Full Time Category Candidates satisfying one of the following conditions is exempted from the requirement of valid GATE/ CEED/ NET/ INSPIRE, etc.:

1.     Having M.E. / M.Tech./ M.Des. Degree or equivalent

2.     Bachelors (B.Tech./ B.Des.) Degree from an Indian Institute of Technology (IIT) with a minimum CPI of 8.0

3.     Masters (M.Sc./ M.A.) Degree from an Indian Institute of Technology (IIT) with a minimum CPI of 8.0

IMPORTANT RULES:

1.    Assistantships/Fellowships from external funding organizations (e.g., CSIR/ UGC/ INSPIRE, etc) will be available as per terms and conditions of the concerned funding organizations.

2.    Students receiving assistantships from the Institute or fellowships from any other funding agencies, are required to perform academic duties as per prevailing norms.

3.    The continuation of the assistantship/ fellowship is subject to satisfactory performance of the assigned duties and satisfactory research progress of the student in the PhD Programme.

How to Apply:

Step-1 Registration:

Following information are to be provided for the registration:  

·         Email address

·         Mobile number

·         Date of Birth as per certificate

·         Name of the Academic Department/Centre to which applying

If any candidate wishes to apply more than one department, he/she has to register separately for each department. After successful registration, candidate will get required login information in the registered email, with this candidate can apply online.

Step-2 Preparation of Required Documents (given on the website):

Step-3 Fil up online application:

Following information will be required to fill up online application

Personal Details

·         Corresponding and Permanent Address

·         Other Details

·         Qualification Details and Work Experience

·         Referee Details

Step-4: Upload Required Documents

Step-5: Preview & Submit Application

Step-6: Pay Application Fee Online/Offline

Application Fee for applying to PhD Programmes:

At the end of online application process, each candidate need to make the payment of application fee online. The applications without successful payment of application fee shall be rejected.

The details of application fee are as follows:

·         All Female Candidates: Rs.150/-

·         All SC/ ST/ PwD Candidates: Rs.150/-

·         All Other Candidates: Rs.300/-

Interview Schedule please visit the college website.

Closing Date:

The online application submission process starts at 14:00 hours on: 12th October, 2018 and ends at 23:55 hours on 31st October, 2018.

Comments:

 

To know more Information about this course please visit: www.iitg.ac.in

This one's down to me! Please accept my apologies for this - I'll see to it that the developer responsible for this happening is given 20 lashes (but only after he or she has fixed this problem).

I'll answer the mail as soon as I can.

Ooops! An unexpected error has occurred.This one's down to me! Please accept my apologies for this - I'll see to it that the developer responsible for this happening is given 20 lashes (but only after he or she has fixed this problem).tv izle