ADMISSION NEWS

Indian Institute of Science, IISc, Bangalore
Bangalore, Karnataka
Phone-No: 080-22932210 080-22932977 080-23601413
Fax: 080-23601413
Email: registrar@iisc.ac.in Website: www.iisc.ac.in
Establish: 1948

About College:

The Indian Institute of Science (IISc) was conceived as a ´Research Institute´ or ´University of Research´ by Jamsetji Nusserwanji Tata, in the final years of the 19th century. A long period of almost thirteen years was to elapse from the initial conception in 1896 to the birth of the institute on May 27, 1909. The early history of the Institute is a fascinating chapter in the story of higher education and scientific research in India. The cast of characters in the drama that led to the establishment of the Institute includes, in addition to its charismatic and generous founder J.N. Tata, figures from the pages of Indian history.

PhD Research Programmes (including ERP) [Participating Departments: Aerospace Engineering, Chemical Engineering, Computer Science and Automation, Computational and Data Sciences, Electrical Communication Engineering, Electrical Engineering, Electronic Systems Engineering, Instrumentation and Applied Physics, Inorganic & Physical Chemistry, Materials Engineering, Materials Research, Mechanical Engineering, Nanoscience and Engineering,  Physics, and Product Design and Manufacturing. / Interdisciplinary programme – Biosystems Science and Engineering]

Eligibility:

Candidates possessing a minimum of second class in the following degrees are eligible to apply:

*The GATE score should be valid as on January 1, 2020. Candidates securing the valid GATE score for the years 2017/2018/2019 may apply.

** NET JRF includes - CSIR-UGC NET for JRF; UGC-NET for JRF; DBT JRF; ICMR JRF; JEST; NBHM Screening test 2019; INSPIRE.

Short-listing is based either on performance in national entrance tests or on the academic performance in the qualifying degree examination as per the table above. The final selection is based on the performance in an interview (in some of the departments, a written test will precede the interview).

(Note that candidates who were called for the interview held in May 2019 in any one of the above mentioned departments are also eligible to apply again. And the cut-off remains the same as fixed for August 2019 admissions)

Reservation for OBC/EWS/SC/ST/Persons with disability (PwD) and Kashmiri-Migrant (KM) candidates: As per the Government of India regulations. Grade/class of qualifying examination is relaxed to a “pass class” for SC/ST candidates.

How to apply:

Application is available online only, candidates can apply online through https://admissions.iisc.ac.in using the link “New Registration/Login”

APPLICATION FEE (non refundable)

·         General / OBC: Rs.800/-

·         SC / ST / PwD: Rs.400/-

·         ERP: Rs.2000/-

* Any bank or payment gateway service charges must be borne by the applicant

Mode of Payment for Application fee:  Only online Payment mode is available (includes internet-banking, Debit Card, Visa/Master Credit Card Payments).

It is desirable that the applicants consult the department websites to obtain further information regarding the research activities of the individual departments/centres/units.

Closing Date:

Website opens for on-line submission of applications: 1^st October, 2019

Last date for online submission of applications: 31^st October, 2019 (23:59 hours)

Date of the Interview: 18^th– 19^th November, 2019

Comments:

To know more Information about this Course please visit: www.iisc.ac.in

Indian Institute of Technology, IIT, Ropar
Nangal Road
Rupnagar, Punjab
Phone-No: 91-1881-227078
Fax: 91-1881-223395
Email: info@iitrpr.ac.in Website: www.iitrpr.ac.in

About College:

Indian Institute of Technology, Ropar is one of the eight new IITs set up by the Ministry of Human Resource Development (MHRD), Government of India, to expand the reach and enhance the quality of technical education in the country. This institute is committed to providing state-of-the-art technical education in a variety of fields and also for facilitating transmission of knowledge in keeping with latest developments in pedagogy. These two areas of focus will enable students to gain exposure to recent trends in their chosen domains of study and gain practical experience through a wide variety of activities the institute facilitates in its own campus and arranges for in collaboration with industry and other institutes. 

Course Name:

PhD Regular [in: Engineering, Sciences, Humanities and Social Sciences, CBME]

Eligibility:

1.    PhD in Engineering:

Civil Engineering: Bachelor’s degree in Civil Engineering followed by a Master’s degree in an appropriate area; consistently good academic background. 

Computer Science and Engineering: M.Tech./M.E/M.S. (or an equivalent qualification) in computer science and engineering (or equivalent degree) with 60% marks (or 6.5 grade point out of 10) (55% marks for SC/ST). OR

Exceptional candidates with B. Tech/B.E degree in computer science and engineering or related area with valid GATE score.

* Candidate with a Bachelor's degree in Computer Science and engineering or related field from any IIT with minimum 8.00 CGPA/CPI out of 10.0 are exempted from requirement of GATE qualification.

** Candidates who are currently studying in final year of their B.Tech/BE program should apply under Direct PhD program.

Electrical Engineering: M.Tech/M.E./M.S. in Electrical/ Electronics/ Communications/ Computer Science/ Instrumentation / Control Engineering or equivalent or Microelectronics/Solid-state Technology/MEMS/Nano Science/Nano Technology/Material Science/Engineering Physics or equivalent, relevant to the area of research with minimum 60% of marks (OR  6.5 grade point out of 10) (55% marks OR 6.0 grade point for SC/ST). OR

Candidates having B.Tech/B.E qualification in Electrical/Electronics/Communications/ Computer Science/ Instrumentation / Control Engineering or equivalent or Microelectronics/Solid-state Technology/MEMS/Nano Science/Nano Technology/Material Science/Engineering Physics or equivalent, and having a CGPA/CPI score of 8.00 (out of 10.0) and above with valid GATE score can apply for admission to PhD programme. OR

A candidate with a Bachelor's degree from any IIT and having a CGPA/CPI score of 8.00 (out of 10.0) and above can apply for admission to PhD programme. Such candidates are exempted from requirement of GATE qualification.

Chemical Engineering: The following is Eligibility Criteria of Chemical Engineering department for PhD admission)

1. Master's degree in ChemicalEngineering/Technology or a Master's degree by Research in ChemicalEngineering/Technology. Candidates must have obtained at least 60% marks (or 6.5 Grade Point out of 10) (55% marks for SC/ST) in their Master's(Must have BTech/BE in Chemical Engineering also). OR

2. Exceptional candidates having B.Tech/B.E (Chemical Engineering) qualification with valid GATE score can apply for direct admission to PhD programme. OR

A candidate with a Bachelor's degree (Chemical Engineering) from any IIT and having a CGPA/CPI score of 8.00 (out of 10.0) and above are exempted from requirement of GATE qualification to apply.

Mechanical Engineering: 1) Master's degree in Engineering/Technology or a Master's degree by Research in Engineering/Technology. Candidates must have obtained at least 60% marks or 6.5 CGPA out of 10 in their Master's. OR

2) Master's degree in Sciences with a valid score in GATE/UGC/ CSIR/NET/NBHM or equivalent qualification. Candidates must have obtained at least 65% marks or 7 CGPA out of 10 in their Master's. OR

3) Exceptional candidates having B.Tech/B.E degree with at least 65% marks or 7 CGPA out of 10 and valid GATE score can apply for PhD programme. The candidate who are in final year (seventh semester) of their B.Tech/BE program should apply under Direct PhD program (as per Direct PhD norms). OR

A candidate with a Bachelor's degree from any IIT and having a CGPA score of 8.00 out of 10 and above are exempted from requirement of GATE to apply.

The relaxation in eligibility and reservation for SC/ST/OBC/PwD will be as per the rules of Govt. of India.

Metallurgical and Materials engineering: Master's degree in relevant Engineering/Technology or a Master's degree by Research in relevant Engineering/Technology. Candidates must have obtained at least 60% marks (or 6.5 Grade Point out of 10) (55% marks for SC/ST) in their Master's. OR

Exceptional candidates with B.Tech./B.E. degree in relevant Engineering/Technology or Master's degree in Sciences with a CGPA/CPI score of 8.00 (out of 10.0) or above with a valid score in GATE/UGC/CSIR/NET or other equivalent national exam. A candidate with a Bachelor's degree from any IIT and having a CGPA/CPI score of 8.00 (out of 10.0) or above are exempted from requirement of GATE qualification to apply.

Candidates who are currently studying in final year of their B.Tech/B.E. program should apply under Direct PhD program.

2.    Ph.D in Sciences:

Chemistry: Masters or equivalent degree in Chemistry/Biochemistry/ Materials Science and Technology/Pharmaceutical Sciences/Biotechnology/Physics or relevant areas with First Class (6.5 grades point out of 10) or 60% marks (55% marks for SC/ST).

Candidates meeting this requirement must also fulfill one of the following additional requirements with valid

a) GATE Qualification

b) UGC/CSIR-NET or Equivalent qualification.

c) DST-INSPIRE or other national fellowship

Candidates with M. Tech or equivalent with First Class (6.5 grades point out of 10) or 60% marks are exempted from requirement of GATE qualification

Mathematics: Master’s Degree in Mathematics/Statistics/Theoretical Computer Science or equivalent Master’s Degree with First Class (60% marks or 6.5 grades point out of 10 ),  55% marks or 6.0 grades point out of 10 for SC/ST.

Candidates  meeting this requirement must also fulfill one of the following additional requirements with valid:

a) GATE Qualification

b) UGC-NET-JRF/CSIR-NET-JRF qualified or NBHM or equivalent qualification.

Physics: Master's or equivalent degree in Physics or relevant subject / B. Tech. in Engineering Physics with First Class (6.5 grades point out of 10) or 60% marks (55% marks for SC/ST) or MTech in relevant areas

Candidates meeting above requirement must also fulfill one of the following qualification with valid certificate:

a) GATE

b) UGC/CSIR-NET(JRF)

c) DST-INSPIRE Fellowship

3.    Ph.D in Humanities and Social Sciences:

Master's or equivalent degree in Anthropology, Cognitive ScienceEconomics, English Literature, Management, Philosophy, Psychology, Sociology and Linguistics with 55% (or 6.0 grade point out of 10). OR

Bachelor’s or equivalent degree in Engineering from any of the IITs/NITs or any other ‘Institute of National Importance’ with minimum of 55% (or 6 grade points out of 10)

Candidates meeting one of these requirements must also fulfil one of the following additional requirements:

a) UGC/CSIR- NET or GATE or equivalent qualification

b) DST-INSPIRE Fellowship OR

Candidates with Bachelor’s in Engineering/Technology from any of the IITs and having CGPA/CPI Score of 8 (out of 10) are exempted from GATE requirement.

4.    Ph.D in CBME:

Biomedical Engineering: 1. A master's degree in engineering (ME / MTech) or medicine (MD) or pharmaceutical sciences (MPharm) or veterinary science (MVSc) or dental surgery (MDS), with a minimum of 60 percent marks (6.5 grade points on a scale of 10). Relaxation for SC/ST candidates as per GOI rules. Or

2. A master's degree in sciences (MSc / MS) or equivalent, with a minimum of 60 percent marks (6.5 grade points on a scale of 10). A valid GATE score or qualified in UGC/CSIR/NET/INSPIRE fellowship, or equivalent. Relaxation for SC/ST candidates as per GOI rules. Or

3. A bachelor's degree in engineering (BE /BTech) or pharmacy (BPharm), with a minimum of 65 percent marks (7.0 grade points on a scale of 10) and a valid GATE score. A bachelor's degree from an IIT with a minimum of 8 grade points on a scale of 10 points without GATE. Relaxation for SC/ST candidates as per GOI rules. Or

4. A MBBS, BVSc, or BDS, with a minimum of 65 percent marks (7.0 grade points on a scale of 10). Relaxation for SC/ST candidates as per GOI rules.

How to Apply:

Steps for applying online:

Welcome to the online admission Portal of IIT Ropar. Please follow below mentioned step(s) for applying online:

1.    Get a login: Create yourself a login in this site to get started with the application process (see a line above heading "You must login or register to view this form"). Choose the option "Create new account" in the user login menu, enter a login name of your choice and a valid email address. An email will be sent from IIT Ropar's mail-id for verification. Please click on the link provided in the mail to validate your account and to login to set your password. Use this password along with the login name you provided to login to this site.

2.    You can change your password or request to reset the password on this portal.

3.    Login to the site and follow the links in the Main menu on the left to fill your application form online.

4.    Email alerts will be sent to your email address, please make sure that mails with the from address "@iitrpr.ac.in" do not get caught in your spam / junk mail folder.

5.    It is requested not to fill the form in Private Browsing Mode or Incognito Mode.

6.    Your application is not submitted until you 'click' submit button. After submission you will receive an acknowledgment mail on your registered mail-id.

7.    While uploading document(s) in form give the a Unique Name [firstname_lastfivedigits_of_your_mobile_no.pdf] to avoid uploading errors.

8.    For any further Technical Details / Queries, send us a mail on info@iitrpr.ac.in

9.    Application fee:

For GEN/ OBC: Rs. 200

For Women/ SC/ ST/ PWD: Rs. 100

10.Mode of fee payment: SB collect

Procedure for payment through SB collect:

1. Go to www.onlinesbi.com

2. Select SB collect

3. Tick the terms and conditions and continue

4. Select state – Punjab

5. Select educational institute - IIT Ropar

6. Select the option for payment category

7. Pay the requisite fee

Closing Date:

Application Open: 13^th October, 2019

Last Date: 3^rd November, 2019

Comments:

To know more Information about this course please visit: www.iitrpr.ac.in

Jawaharlal Nehru Centre for Advanced Scientific Research, JNCASR, Bangalore
A Deemed University
Jakkur P.O.
Bangalore, Karnataka
Phone-No: 080-22082777
Fax: 080-22082766
Email: admissions@jncasr.ac.in Website: www.jncasr.ac.in

About College:

We are a relatively young but already well-known multidisciplinary research institute. Our mandate is to pursue and promote world-class scientific research and training at the frontiers of science and engineering. The Centre was established in 1989 by the Department of Science and Technology of the Government of India, to mark the birth centenary of Pandit Jawaharlal Nehru. However, the bulk of our growth has been in the past decade. Our small size (around 40 faculty members, spread over several disciplines) is an advantage: not segregated in far-flung labs, our chemists, physicists, biologists and engineers rub shoulders throughout the day. This fosters a spirit of interdisciplinary collaboration which is one of the hallmarks of JNCASR. In addition to our young and dynamic faculty, we have over 150 bright and energetic graduate students and state-of-the art experimental, computational and infrastructural facilities. We are a "Deemed University", granting Master's and Ph.D. degrees.

Course Name:

PhD

Eligibility:

Candidates with an M Sc., B E, B Tech, M E, M Tech or MBBS are eligible to apply.  They should have at least 50% in their highest University examination, and should also have qualified in the GATE / JEST /GPAT or UGC -/ CSIR - NET-JRF/ / ICMR - JRF / DBT-JRF/ INSPIRE-JRF. The award certificate of such test should have the validity period for seeking admission to research programme as on the first working day of the beginning of the session/semester (1 January or 1 August). Generally ME/M.Tech students are required to qualify one of the exams mentioned above, however exceptional candidates without these exams may also be considered.

Course Name:

MS (Engineering)

MS (Research)

Eligibility:

Candidates with an M.Sc., B.E, B.Tech, M.E, M.Tech or MBBS are eligible to apply; the specific requirements for each Unit are listed on website. They should have at least 50% in their highest University examination, and should also have qualified in either the GATE / JEST/GPAT or UGC or CSIR - NET-JRF/ ICMR - JRF / DBT-JRF/ INSPIRE-JRF.

The award certificate of such test should be within the validity period for seeking admission to research programme as on the first working day of the beginning of the academic session/semester (1 January or 1 August).

How to Apply:

Jawaharlal Nehru Centre for Advanced Scientific Research (JNCASR) invites application for admission to Ph.D, M.S (Engg) and M.S (Research) programs commencing in January 2019. Online application is a Two-Step process. Step 1 is to register and validate your email address. Step 2 is to fill up the application form.

Apply Online through the website.

Step 1

·         Fill up the register form.

·         You will be send a confirmation email for validation.

·         On confirmation, go to Step 2.

Step 2

·         Enter your email and password in login form.

·         On validation you will be redirected to online application form.

Closing Date:

The last date for submission of online application form: 27^th October, 2019

Interviews will be held from: 4^th -13^th December, 2019

Comments:

To know more Information about this courses please visit: www.jncasr.ac.in/admit

Indian Institute of Technology Tirupati, IITTP, Tirupati
Renigunta Road, settipalli post
Tirupati-517506 Andhra Pradesh
Phone: 0877 2500350
Email ID: research@iittp.ac.in Website: www.iittp.ac.in
About College:

Indian Institute of Technology Tirupati is the first among the 3rd phase of IITs, announced in 2014, to have its foundation stone laid in March 2015. It started functioning with the support of it’s mentoring institute, IIT Madras from the academic year of 2015-16. The academic program was launched in August 2015 by admitting students in the B.Tech programme in the fields of Civil Engineering, Computer Science & Engineering, Electrical Engineering and Mechanical Engineering. The curriculum has emphasis on theoretical knowledge and practice oriented laboratories. Courses are planned to nurture innovation, creativity, quality, teamwork, communication skills, ethics and societal interaction. MS and PhD programmes will be started from academic year 2017-18.

Presently, IIT Tirupati is operating from the temporary campus on Tirupati – Renigunta Road and also the transit campus at Yerpedu. The transit campus was formally inaugurated by the Director Prof. K.N Satyanarayana on 6th August 2018 and the orientation program for first year students was organized on 7th August 2018. Two boys hostels are now operational for first year students and the third hostel is almost ready for occupation by senior students. 120 and 60 seater classrooms are also ready for conducting classes for the first year students. With these arrangements, transit campus operations have started from August 2018.

Course Name:

Doctor of Philosophy (Ph.D.) [Research Areas: Engineering, Sciences and Humanities and Social Sciences, Humanities and Social Sciences]

Eligibility:

Ph.D. in Engineering:

(a)  Candidates with a Master’s degree in Engineering/Technology or a Master’s degree by Research in Engineering/Technology with a good academic record.

(b)  Candidates with Master’s degree in Sciences with a good academic record and of exceptional merit are eligible for the relevant Engineering discipline. They should have a valid GATE score or UGC/CSIR-NET/NBHM or equivalent qualification in the relevant area tenable for the year of registration.

(c)  Candidates who have qualified for the award of Bachelor’s degree in Engineering/Technology from a Centrally Funded Technical Institute (CFTI) with an exceptionally good academic record in an eligible discipline will be considered for direct admission to Ph.D. provided he/she has a minimum CGPA of 8/10.

Ph.D. in Sciences:

(a)  Master’s degree in Sciences with a good academic record and having a valid GATE score or UGC/CSIR-NET/NBHM/INSPIRE/JEST or equivalent qualification tenable for the current year in the relevant area. Master’s degree holders in Engineering/Technology are also eligible.

(b)  ME/M.Tech or MS by Research in Engineering or 2 year M.Sc from IITs (entry through JAM) with CGPA 8.0 and above/ BS+MS (5 year integrated) from CFTI

(c)  Candidates who have qualified for the award of Bachelor’s degree in Engineering/Technology from a Centrally Funded Technical Institute (CFTI) with an exceptionally good academic record in an eligible discipline will be considered for direct admission to Ph.D. in Sciences provided he/she has a minimum CGPA of 8/10.

Ph.D in Humanities and Social Sciences:

Master's degree in an eligible discipline with a good academic record or equivalent and having a valid GATE score or UGC/CSIR- NET/NBHM or equivalent qualification tenable for the current year in the relevant area.

Course Name:

M.S. Research [Research Areas: Engineering]

Eligibility:

The minimum educational qualifications for admission to the M.S. by research degree for full time scholars are as follows:

(a)  Candidates with a Bachelor's degree in Engineering/Technology in the relevant departments with valid GATE score.

(b)  Candidates having Associate Membership of the following professional bodies are also eligible for admission to the M.S. programme of their parent discipline provided they have a valid GATE score and have passed both part A and part B of the Membership examinations with a good academic record: The Institution of Engineers (India) (Civil/Mechanical/Electrical and Electronics/Electronics and communications), The Institute of Electronics and Tele-Communication Engineering.

(c)  Engineering graduates from IITs and other Centrally Funded Technical Institutes (CFTI) with a CGPA of at least 8/10 are eligible for seeking admission, without GATE score, to the MS Programme and they can be offered HTRA, if selected.

(d)  Candidates under External Registration should have the same qualification as in (a) however, valid GATE score is not required.

How to Apply:

Important Guidelines for Application:

1.    Please read the instructions given in the admission brochure carefully before filling up the application form.

2.    Online application form is available at the Institute website iittp.ac.in. After filling the form, please take a printout and keep it for records.

3.    The application fee is as follows:

·         GN/EWS/OBC-NCL Male candidates : Rs.100/-

·         GN/OBC-NCL Female candidates : Rs.50/-

·         SC/ST and PwD candidates : Rs.50/-

APPLICATION FEE IS NON-REFUNDABLE

Application fee payable through online.

4.    A valid OBC-NCL/EWS Certificate must be uploaded with the ONLINE application and submitted at the time of admission.

5.    You should check the IIT Tirupati website for important announcements and the results.

6.    Candidates called for written test/interview must bring with them printed copy of the application that they submitted online along with originals and photocopies of the relevant certificates.

Closing Date:

The last date for submission of applications is: 28^th October, 2019 (Monday)

Written Test/ Interview: 9^th - 10^th December, 2019

Comments:

To know more Information about this courses please visit: www.iittp.ac.in

Academy of Scientific and Innovative Research, AcSIR, Ghaziabad

CSIR- Human Resource Development Centre, (CSIR-HRDC) Campus
Postal Staff College Area,
Sector 19, Kamla Nehru Nagar,
Ghaziabad, Uttar Pradesh- 201002
Ph: +91-120-2783009 (L), +91-9266600847 (M), 9266600947 (M)
Contact Us: admission2020@acsir.res.in Website: www.acsir.res.in

About College:

Established in 2011 as an ‘Institution of National Importance’ (interim operations started in June, 2010), the Academy of Scientific and Innovative Research (AcSIR) has adopted the mandate to create and train some of the best of tomorrow’s Science & Technology leaders through a combination of innovative and novel curricula, pedagogy and evaluation. AcSIR’s focus will be on imparting instruction and providing research opportunities in such areas that are not routinely taught in regular academic universities in India.

It has been set up based on a ‘Hub and the Spokes’ model where hub is responsible for centralized administrative functions. The spokes are located in the 37 laboratories and 6 units of CSIR spread along the length and breadth of India, which act as actual campuses for different subjects or areas depending on their respective specializations. At present, the Academy has 2478 faculty members from CSIR Laboratories, 36 Adjunct faculty members, Over 3000 students enrolled in various programmes and 21 non-academic staff members.

Course Name:

PhD (Sciences)

Eligibility:

PhD (Sciences)

Candidates with a Bachelor's degree in Engineering/ Technology, Medicine or Master's degree in Science are eligible to apply. The candidate should be having a valid National level fellowship (JRF/ SRF of various funding agencies, e.g. CSIR, UGC, DBT, DST etc.) or any other equivalent fellowship like INSPIRE, RGNF etc.

Project Assistants, Senior Research Fellows, Group-IV Scientists and Group-III Technical Staff of CSIR are also eligible to apply (as per relevant AcSIR rules).

Sponsored PhD (Sciences):

Master’s degree in Science with endorsement from Industry, Academic or Research Institutes for required academic leave and financial support during program.

Applicants qualifying their degree in percentage shall use the formula, CGPA=(Percentage + 5) /10. Applicants with percentage ≥ 95%, shall fill 10 CGPA in the Online Application Form.

Course Name:

PhD (Engineering) and Sponsored PhD (Engineering)

Eligibility:

(i)    A Master’s degree in Engineering or Technology following a four-year engineering/technology or 4/5 year science degree; or an integrated minimum-5-year M Tech degree; or equivalent. AND

(ii)     At least one of the following

(a)     Awarded a national-level fellowship (such as NET JRF) tenable at CSIR institutes

(b)    Meeting all the conditions required for eligibility for the CSIR-SRF

(c)     Meeting all the conditions for award of the INSPIRE fellowship (typically awarded to students ranked first in the University)

(d)    Meeting all the conditions stipulated by AcSIR for Project Assistants to register for a PhD

(e)    Meeting all the conditions stipulated by AcSIR for industry-sponsored* students.

Project Assistants, Senior Research Fellows, Group-IV Scientists and Group-III Technical Staff of CSIR are also eligible to apply (as per relevant AcSIR rules).

Course Name:

Integrated Dual-Degree IDDP (Integrated M.Tech-Ph.D) Program

Eligibility:

(i)      A 4-year undergraduate degree in Engineering or Science (such as BE/BTech/BS), or a five year degree in Science (such as MSc), or equivalent. AND

(ii)     At least one of the following

(a)     Awarded a national-level fellowship (such as NET JRF) tenable at CSIR institutes

(b)    Meeting all the conditions required for eligibility for the CSIR-GATE-JRF

(c)     Meeting all the conditions for award of the INSPIRE fellowship (typically awarded to students ranked first in the University)

(d)    Meeting all the conditions stipulated by AcSIR for Project Assistants to register for a PhD

(e)    Meeting all the conditions stipulated by AcSIR for industry-sponsored* students.

Project Assistants, Senior Research Fellows, Group-IV Scientists and Group-III Technical Staff of CSIR are also eligible to apply (as per relevant AcSIR rules).

* with endorsement from Industry, Academic or Research Institutes for required academic leave and financial support during program.

These are only minimum quality yardsticks of eligibility for consideration for admission and bear no relationship with financial assistance or scholarship. Any stipend, scholarship or financial source for study would be the sole responsibility of the student. AcSIR itself does not provide any such scholarship or have any rule in these matters.

How to Apply:

For Admission Process, you need to follow two phases:

1.    Sign-Up phase: In Sign-Up phase, once you successfully Sign-Up on AcSIR Online Admission Portal, you will be receiving auto email on your email-id with login credentials and link to be re-directed for further complete admission form fill-up process.

2.    Online Application Form Phase: On completion of AcSIR Online Application form, AcSIR Application Number (AAN) will be generated e.g. AcSIR12345. This AAN shall be used in future correspondence between applicant and AcSIR.

3.    Print Acknowledgement of Admission Receipt with AcSIR Application Number (AAN).

(Please note: Candidates who are choosing CSIR-IGIB as one of the preferred Labs must fill up this online form only after reading the instructions on the CSIR-IGIB application portal on the institute website, available with effect from 27 September 2019 at IGIB website.

·         Important dates of admission process and any other update or information will be flashed on Portal-Please check regularly.

·         For each Program of study, only one application is allowed for an applicant. If, at any time, it is found that more than one application is filled by a candidate then the candidature will be summarily rejected.

·         Short-listed  candidates  will  be  intimated electronically  and  they  will  be  required  to appear  for  Test and/or Interview at  the designated centres on the dates announced, based on which final selection would be made.

·         Number of seats available in each program at each Institute may vary.

To know more information about how to apply please contact here:

Academy of Scientific and Innovative Research (AcSIR)

CSIR- Human Resource Development Centre, (CSIR-HRDC) Campus

Postal Staff College Area,

Sector 19, Kamla Nehru Nagar,

Ghaziabad, Uttar Pradesh- 201002

Ph: +91-120-2783009 (L), +91-9266600847 (M), 9266600947 (M)

Contact Us: admission2020@acsir.res.in

Closing Date:

Commencement of Online Admission Portal: 20^th September, 2019

Last date of submission of Online Application: 24^th October, 2019

Aptitude Test/Interview: 19^th November, 2019 To 16^th December, 2019

Comments:  

To know more Information about entrance please visit: www.acsir.res.in/admissions/

Indo German Tool Room, IGTR, Aurangabad
A Govt of India Society under Ministry of S.S.I. Tool Room & Training Centre
P-31, M.I.D.C. Chikalthana Industrial Area
Aurangabad, Maharashtra
Phone-No: 0240 2486832 2482593
Fax: 02402484028
Email: gm@igtr-aur.org Website: www.igtr-aur.org

About College:

The government of India in its endeavor to provide right stimulus for the growth of industry in the country – particularly with a objective of helping MSME’s has established Indo German Tool Room, Aurangabad. A project of Government on India, Government of Federal Republic Of Germany & Government of Maharashtra, Indo German Tool Room (IGTR) an ISO 9001:2000, ISO 14001:2004is a centre which nurtures excellence and provides total tooling & training solutions. IGTR is concentrating on an integrated development of the related segments of the industry by way of providing International Quality Tools, Trained Personnel., Consultancy in Tooling & Related Areas & is constantly crossing new frontiers in quest for excellence & beyond.

Course Name:

Post Graduate Diploma in Tool Design and CAD/CAM {NSQU Level 8}

Post Graduate Diploma in Mechanical Product Design (PGDMPD) [at Aurangabad only] {NSQU Level 8}

Duration: 1 ½ Years

Eligibility:

Degree in Engg. (Mech./Prod.)

Registration fee: 18000/-

Security Deposit: Rs. 5000/-

Course Name:

Post Graduate Diploma in Mechatronics (PGDM) [at Aurangabad only] {NSQU Level 8}

Post Graduate Diploma in VLSI and Embedded Systems [at Aurangabad only] {NSQU Level 8}

Duration: 1 ½ Years

Eligibility:

Degree in Engg. (Elec./ECE/Inst./Mech./Prod.)

Registration fee: 18000/-

Security Deposit: Rs. 5000/-

Course Name:

Post Diploma in Tool Design and CAD/CAM {NSQU Level 6}

Post Diploma in Tool and Die Manufacturing [at Aurangabad only] {NSQU Level 6}

Post Diploma in Product Design [at Aurangabad only] {NSQU Level 6}

Post Diploma in CNC Machine Maintenance [at Aurangabad only] {NSQU Level 6}

Duration: 1 Year

Eligibility:

Diploma in Engg. (Mech./Prod.)

Registration fee: 12000/-

Security Deposit: Rs. 5000/-

Course Name:

Post Diploma in Mechatronics [at Aurangabad only] {NSQU Level 6}

Post Diploma in Industrial Automation and Robotics [at Aurangabad only] {NSQU Level 6}

Duration: 1 Year

Eligibility:

Degree in Engg. (Elec./ECE/Inst./Mech./Prod.)

Registration fee: 12000/-

Security Deposit: Rs. 5000/-

Course Name:

Advance Certificate course in tool Design and CAD/CAM {NSQU Level 5}

Advance Certificate course in tool and Die MFG. [at Aurangabad only] {NSQU Level 5}

Duration: 1 Year

Eligibility:

I.T.I (Draughtsman Mech./Machinist/Turner/Bench Filtter/Tool and Die Maker)

Registration fee: 12000/-

Security Deposit: Rs. 5000/-

How to Apply:

·         Registrations for the above courses are under progress

·         22.5% seats are reserved for SC/ST candidates for whom no tuition fee will be charged.

Contact for Further details:

·         Log on to the website for course details

·         Indo German Tool Room, Aurangabad, P-31, M.I.D.C. Industrial Area, Chikalthana, Aurangabad 431006. M.S. India Tel No.: 0240 2486832, 2482593, 2470541 Fax: 0240 2484028 Email: training@igtr-aur.org

·         Indo German Tool Room, Aurangabad, Extension Centre Pune at IGTR-MSME DI CAD/CAM Training Centre, Shankarshet Road, Near PMT Workshop, Swargate, Pune 411037 M.S. Tel. No.: 020 24440861, Fax: 020 24440862, Email: igtr_pune@yahoo.co.in

·         Indo German Tool Room, Aurangabad, Extension Centre Pune at Mahasainik industrial estate (MSIE), Plot No. T-153/1, Pimpri Industrial Area, Bhosari, Pune- 411026 Maharashtra, India, Contact no. 020 27121100, 27121122 Email: igtrecmsie@igtr-aur.org.

·         Indo German Tool Room, Aurangabad, Extension Centre Nagpur, plot no P-142, MIDC Industrial Area, Hingana, Nagpur 440006 M.S. Tel. No.: +91-7104 – 297136, 9075095552 Email: training_ngp@igtr-aur.org

Closing Date:

Coming Soon…

Commencement of the courses on: 7^th October, 2019

Comments:

To know more Information about this courses please visit: www.igtr-aur.org

National Power Training Institute, NPTI, Neyveli
Ministry of Power, Govt. of India
Southern Region, Block-14
Neyveli, Tamil Nadu - 607803
Phone-No: 04142 269427
Fax: 04142 269427
E-mail: contact@nptineyveli.in Website: www.nptineyveli.in

About College:

National Power Training Institute, Southern Region is one of the 9(Nine) Institutes under National Power Training Institute, a Registered Society functioning with the grant-in-aid from Ministry of Power, Government of India. National Power Training Institute, Southern Region, Neyveli is the very first Power Training Institute in the country. It was started in 1965 as Steam Power Station Personnel Training Institute later renamed as Thermal Power Station Personnel Training Institute under the erstwhile Central Water Power Commission. The objective of setting-up of this Training Institute was to provide a centralized facility for training the engineers of Thermal Power Stations which were coming up in the country during that time. Neyveli was chosen for setting up this Institute as six Thermal units of 300 MW were commissioned and units for another 300MW were under construction at that time at Neyveli as a turn-key project by Russians.

Course Name:

Post-Diploma Course in Power Plant Engineering (PDPPE) 20^th Batch

Eligibility:

Should have passed a Diploma in Mechanical /Electrical/ Electrical & Electronics / Electronics & Communication/ Control & Instrumentation/Electronics & Instrumentation Engineering from a recognized Polytechnic/Board.

SELECTION CRITERIA FOR ADMISSION: Merit based on Diploma marks. No age limit. Reservation for SC/ST/OBC/PH is applicable as per Govt. norms.

TOTAL SEATS: 77 (Seventy seven seats). 25% seats for Sponsored candidates. For admissions under sponsored category, candidate has to provide sponsorship letter. Vacant seats in sponsored category shall be filled by non-sponsored candidates. Sponsored candidates will not be considered for campus placement.

PLACEMENT: To provide career opportunities in the Indian Power Sector, NPTI maintains close linkages with Power Utilities and reputed companies for employment of these trained Diploma engineers. Students of previous batches were placed in reputed Power companies. However NPTI does not guarantee placement.

How to Apply:

Applications on plain paper along with SBI Collect Reference or Demand Draft of Rs.700/- including GST towards application fee in favour of National Power Training Institute payable at Neyveli should reach The Director, National Power Training Institute (SR), Block-14, Neyveli 607803 on or before 21.10.2019 with a passport size photograph pasted in the prescribed format containing 1. Name 2. Father’s Name 3. Date of birth & age as on 01.10.2019 4. Gender 5. Marital Status 6. Nationality 7. Whether SC/ST/OBC/PH 8. Postal Address, Mobile/Telephone Number & E-mail ID 9. Educational qualification starting from 10th Standard stating Branch, College/Institution, % of marks, year of passing 10. Experience, 11. Sponsored/Non-sponsored (If sponsored, attach sponsorship letter). 12. Details of DD/SBI Collect 13.Signature with date. Attach attested copies of proof for item No.3, 7, 9, & 10. Application form can also be downloaded from website.

PLEASE NOTE:

1.    Candidates with other discipline (not mentioned in eligibility) need not apply.

2.    Application fee is non-refundable.

3.    Only selected candidates will be informed through E-mail/post. Please refer NPTI (SR) website.

4.    For this admission related queries, please Contact 9442980917/ 9443324051(or) Contact Landline No.  04142-269427 between 10 A.M. & 5 P.M. on working days. For further information Contact,  Smt S. AMIRTHAVALLI, Deputy Director/Training Officer, NPTI(SR), Neyveli, Mob.No.9442980917

Closing Date:

Last Date of receipt of application: 21^st October, 2019

Display of admission status in: 25^th October, 2019

Date of counseling and admission: 6^th November, 2019

Tentative date of commencement of the Course: 25^th November, 2019

Comments:

To know more Information about this courses please visit: www.nptineyveli.in

National Power Training Institute, NPTI, Nangal
Under Ministry of Power, Govt. of India
Hydro Power Training Centre, Nangal Dam, District: Ropar,
Nangal, Punjab 140124
Phone-No: 01887 - 220573 220391
Fax: 01887 – 221129
Email: hptc_npti@rediffmail.com Website: www.npti.gov.in
About College:

National Power Training Institute (NPTI), an ISO 9001 & ISO 14001 organization, is a National Apex body for Training and Human Resources Development in Power Sector with its Corporate Office at Faridabad. NPTI is continuing its dedicated service for the last four decades. NPTI operates on an all India basis through its Units in different zones of the country located at Faridabad, Neyveli (1965), Durgapur (1968) Badarpur – New Delhi (1974), Nagpur (1975), Centre for Advanced Management and Power Studies (CAMPS) – Faridabad (2000), North-Eastern Regional Institute – Guwahati (2003), Hydro Power Training Institute (HPTI) – Nangal (2006), Power Systems Training Institute (PSTI) – Bangalore (1972) and Hot Line Training Centre (HLTC) also at Bangalore (1974).The Institutes of NPTI are well equipped with Hi-Tech infrastructural facilities for conducting different courses on technical as well as management subjects covering the needs of Thermal, Hydro, Transmission & Distribution Systems, and Energy related fields of the Indian Power and allied Energy sectors.

Course Name:

Post Graduate Diploma in Hydro Power Plant Engineering (PGDHPPE) 11^th Batch

Duration: 39 Weeks

Eligibility:

BE/B.Tech or equivalent in Mechanical/ Electrical/ Electrical & Electronics/ Power Engineering from a recognized College/University for both Non- sponsored & sponsored candidates. Candidates under sponsored category have to provide sponsorship letter from its employer/sponsoring authority.

AGE LIMIT No age limit.

SELECTION PROCEDURE Merit basis (% of marks of qualifying Degree).

TOTAL SEATS 60 (Sixty). Reservation for EWS/SC/ST/OBC/PWD etc is applicable as per Govt. of India norms. 25% seats are reserved for candidates sponsored from the power utilities. Total No of seats may vary as per requirements. Vacant seats in sponsored category may be filled by non-sponsored category & vice-versa if required.

PLACEMENT This course is job oriented professional course and NPTI maintains close linkages with the Hydro Power utilities & reputed hydro power companies for the placement. Last year about 95% PGDC Hydro students, batch 2018-19 placed in reputed companies. However institute doesn’t claim the guarantee of placement.

How to Apply:

Prescribed application as per format (i.e. Annexure A, B & C) filled with relevant details along with application fee of Rs. 1000/- including GST (Non-refundable) to be paid by online mode as per detail given below or Demand Draft of in favour of “HPTC, NPTI, Nangal” payable at Naya Nangal (SBI, Branch code-0689), Punjab should reach to Principal Director, National Power Training Institute (HPTC), Nangal, Distt. Ropar-140124 (Punjab) latest by 27th Sept 2019 up to 05.00 PM. Envelope containing the application form and other documents should be superscribed “Application for PGDC (Hydro) – 2019-20”.

BANK DETAILS

Name of Beneficiary HPTC, NPTI, Nangal

Name of Bank SBI, Naya Nangal

Account No 30476401576

IFSC SBIN0000689

Closing Date:

Last date of Receipt of application: 27^th September, 2019

Final merit list will be displayed at institute websites on: 4^th October, 2019

Counselling for admission of candidates (all categories): 17^th & 18^th October, 2019

Commencement of Course: 21^st October, 2019

Comments:

To know more Information about this courses please visit: www.npti.gov.in/npti_nangal

Manav Rachna International University, MRIU, Faridabad
Sector - 43, Delhi - Surajkund Road
Faridabad, Haryana
Phone-No: 91 129 4198100
Fax: 91 129 4198111 
Email: info@mriu.edu.in Website: www.mriu.edu.in

About College:

Manav Rachna International University draws its legacy from Career Institute of Technology and Management (CITM) which was established in 1997 as an Engineering College affiliated to MDU Rohtak with the approval of AICTE with an Annual Intake of 180 in three B.Tech Programs. It was first private self financing Engineering College in District Faridabad and became one of the most preferred destination for Admission seekers in NCR in a short period. CITM was granted Autonomous status in July 2008 by Government of Haryana. MHRD, Government of India conferred Deemed to be University status to CITM on the recommendations of UGC and AICTE in October 2008 in the name and style of Manav Rachna International University (MRIU). The University admitted its first batch of students in 2009.

Course Name:

Ph.D. [Faculty of Applied Sciences: Department of Physics, Department of Chemistry, and Department of Mathematics] [Courses offered by MRIIRS]

Ph.D. [Faculty of Engineering: Department of Computer Science and Technology, Department of Electronics & Communication Engineering and Department of Mechanical Engineering] [Courses offered by MRIIRS]

Ph.D. [Faculty of Management and Commerce: Department of Management & Humanities] [Courses offered by MRIIRS]

Ph.D. [Faculty of Education: Department of Education] [Courses offered by MRIIRS]

Ph.D. [Faculty of Law: Department of Law] [Courses offered by MRIIRS]

Eligibility:

Admission Procedure

·         Admission to Ph.D. Programme shall be based on merit in entrance test and interview. Entrance Test is of 100 Marks, written test (70 Marks) of 90 minutes duration (MCQs) followed by Interview (30 Marks).

·         The written test shall comprise two sections, each with 50% weightage:

·         Section A consisting Research Methodology and Aptitude (Logical Reasoning, Analytical Reasoning, Numerical Ability, Statistics)

·         Section B is Subject Specific.

·         The candidates who have qualified UGC- NET (including JRF)/ UGC-CSIR NET (including JRF)/ SLET/ GATE/ M. Phil. are exempted from written test.

For any query, please call at 0129-4259000 or mail at admissions@manavrachna.edu.in

How to apply:

Important Instructions for Candidates

·         In order to apply for Ph.D in the University, the payment for processing is to be made electronically. Keep the details regarding e-banking/Credit card/ Debit card etc. ready.

·         Fill in the details and click on Next to proceed.

·         Fields marked with * are mandatory.

·         Already Registered users can log in again.

·         Form fee is Rs 1200 + 72 (Transaction/Service Charge) = Rs 1272/- and is non-refundable.

Closing Date:

Last Date for e-form filling: 24^th November, 2019

Entrance test and Interview: 30^th November, 2019

Comments:

To know more Information about this courses please visit: www.mriu.edu.in

Krishna Engineering College, KEC, Ghaziabad
U P Technical University, Lukhnow
95, Loni Road, Near Air Force Station-Hindon, Mohan Nagar
Ghaziabad, Uttar Pradesh
Phone-No: 91-120-293173132 Mobile : 91-9871293948
Fax: 91-120-2930413
Email: krishnacollege@rediffmail.com Website: www.krishnacollege.ac.in

About College:

Krishna Engineering College (KEC, Ghaziabad) was established in 2004 by Friends Charitable Society (FCS) Ghaziabad. FCS has eminent Businessmen, Industrialists and Professionals as its members. FCS members are also associated with other leading Educational Institutions in NCR and other region of UP like Krishna Institute of Engg & Technology (KIET), Inderprastha Engg College (IPEC), and Krishna Dental College (KDC) Krishna Institute of Technology (KIOT), Krishna Girls Enginering College (KGEC),Krishna Institute of Management & Technology(KIMT). KEC has been established as an institution for the millennium with a vision to turn out scholars who will be Global Players when they leave the portals of KEC. 

Course Name:

B.Tech [Specialization in: Computer Science & Engineering (CS), Information Technology (IT), Electronics and Communication Engineering (EC), Mechanical Engineering (ME), Civil Engineering (CE)]

Eligibility:

10+2 with Physics, Chemistry & Mathematics with minimum 50% marks.

Mode of Admission:

1. Through UPSEE- Counselling: UPSEE/JEE-Mains qualified candidates having allotment letter in favour of the institute are required to report to the college and submit the admission form along with complete sets of documents and fee. The rest of the procedure will be completed in the college.

2. Direct Admission against Vacant Seat: As notified in UPSEE Information Brochure 2018-19.

Course Name:

B.Tech. (Lateral Entry)

Eligibility:

3 Years Engg. Diploma / B.Sc. with minimum 60% marks

Mode of Admission:

1. Through UPSEE- Counselling: UPSEE/JEE-Mains qualified candidates having allotment letter in favour of the institute are required to report to the college and submit the admission form along with complete sets of documents and fee. The rest of the procedure will be completed in the college.

2. Direct Admission against Vacant Seat: As notified in UPSEE Information Brochure 2018-19.

How to Apply:

To know more information about how to apply please Contact here:

Krishna Engineering College, KEC, Ghaziabad
U P Technical University, Lukhnow
95, Loni Road, Near Air Force Station-Hindon, Mohan Nagar, Ghaziabad, Uttar Pradesh
For information related to admission/registration Please Contact Reception:

09999110887-872, 0120-2657731-32 Telefax: 0120 2659513

Email: krishnacollege@rediffmail.com 

Comments:
To know more Information about this course please visit: www.krishnacollege.ac.in